复合氨基酸微量元素螯合物制备新工艺的研究

本文报道了以废羽毛为原料，采用矿物质硫酸盐的制备与中和脱酸、螯合反应结合的新工艺，以金属盐类作催化剂和硫酸水解法，制得了复合氨基酸微量元素螯合物。复合氮基酸生成率为７１．７％，微量元素螯合率达到９８％以上。该工艺简单易行，生产成本低。     

Single Atoms of Iron on MoS2 Nanosheets for N2 Electroreduction into Ammonia

Efforts have been devoted to achieving a highly efficient artificial synthesis of ammonia (NH₃). Reported herein is a novel Fe-MoS₂ catalyst with Fe atomically dispersed onto MoS₂ nanosheets, imitating natural nitrogenase, to boost N₂ electroreduction into NH₃ at room temperature. The Fe-MoS₂ nanosheets exhibited a faradic efficiency of 18.8 % with a yield rate of 8.63 μg mg_cat.⁻¹ h⁻¹ for NH₃ at −0.3 V versus the reversible hydrogen electrode. The mechanism study revealed that the electroreduction of N₂ was promoted and the competing hydrogen evolution reaction was suppressed by decorating the edge sites of S in MoS₂ with the atomically dispersed Fe, resulting in high catalytic performance for the electroreduction of N₂ into NH₃. This work provides new ideas for the design of catalysts for N₂ electroreduction and strengthens the understanding about N₂ activation over Mo-based catalysts.     

Adsorption of 1,10-phenanthroline within a dodecanethiol monolayer: an approach to a switchable electrode surface

A simple method was used to prepare a "switchable" electrode surface by using self-assembled monolayers of dodecanethiol on a gold electrode. The dodecane-modified electrode was electrochemically inactive until the monolayer was soaked in solutions of 1,10-phenanthroline or 2,2'-bipyridine. The electroactive form of the electrode could be reverted back to the nonelectroactive form by rinsing the electrode. Surface IR results showed that both dodecanethiol and 1,10-phenanthroline exist in the mixed monolayer.     

Enantioselective, (−)-sparteine-mediated deprotonation of geranyl and neryl N,N-diisopropylcarbamate: configurational stability of the intermediate lithium compounds

(E)/(Z)-Isomeric allylic carbamate esters were deprotonated by n-butyllithium/(−)-sparteine in toluene. Trapping experiments with chlorotrimethylsilane afforded the α-substitution products, with (R)-configuration, revealing that the pro-S proton is removed predominantly to form the corresponding (S)-lithium·(−)-sparteine derivatives; k_S/k_R>15:1 and >7:1, respectively. A slow (S)→(R)-epimerization occurs at −78 °C (T_1/2>60 min). The allylic double bond is stable to (Z)-(E) isomerization under these conditions.     

M4 @Si28 (M=Al,Ga): metal-encapsulated tetrahedral silicon fullerene

It is known that silicon fullerenes cannot maintain perfect cage structures like carbon fullerenes. Previous density-functional theory calculations have shown that even with encapsulated species, nearly all endohedral silicon fullerenes exhibit highly puckered cage structures in comparison with their carbon counterparts. In this work, we present theoretical evidences that the tetrahedral fullerene cage Si(28) can be fully stabilized by encapsulating a tetrahedral metallic cluster (Al(4) or Ga(4)). To our knowledge, this is the first predicted endohedral silicon fullerene that can retain perfectly the same cage structure (without puckering) as the carbon fullerene counterpart (T(d)-C(28) fullerene). Density-functional theory calculations also suggest that the two endohedral metallosilicon fullerenes T(d)-M(4)@Si(28) (M=Al and Ga) can be chemically stable because both clusters have a large highest occupied molecular orbital-lowest unoccupied molecular orbital energy gap ( approximately 0.9 eV), strong spherical aromaticity (nucleus-independent chemical shift value of -36 and -44), and large binding and embedding energies.     

High extraction efficiency fiber coated with calix[4] open-chain crown ether for solid-phase microextraction of polar aromatic and aliphatic compounds

The calix[4] open-chain crown ether, 5,11,17,23-tetra-tert-butyl-25,27-di(2-allyloxyethoxyl)-26,28-dihydroxycalix[4]arene was synthesized and used for preparation of solid-phase microextraction (SPME) fibers of enhanced extraction efficiency. The new SPME coating made from calix[4] open-chain crown ether and hydroxyl-terminated silicone oil was developed with the aid of vinyltriethoxylsilane as bridge using sol-gel method and cross-linking technology. The efficiency of the novel fiber in the extraction of polar aromatic and aliphatic compounds, such as phenols, alcohols, and volatile fatty acids, was also investigated. Due to the introduction of the polar open-chain crown ether in calix[4]arene molecules, the calix[4] open-chain crown ether fiber showed much better selectivity and sensitivity to these polar compounds in comparison with calix[4]arene fiber. It also had superior extraction efficiency when compared to commercial poly(dimethylsiloxane)-divinylbenzene and polyacrylate fibers. Parts per billion to parts per trillion level detection limits were achieved for most of the analytes through SPME in conjunction with GC and flame ionization detector. The linear ranges were two to four orders of magnitude, and the RSD values were below 7% for all analytes. The novel fiber was applied to determine volatile alcohols and fatty acids in wine samples. The volatile-free wine prepared in this work was used to assure similar chemical environment for analytes in both calibration solutions and in real wine samples, thus compensating for possible matrix interferences. The established internal standard method using 4-methyl-2-pentanol as internal standard showed satisfactory accuracy and precision.     

Application of artificial neural networks in multivariable optimization of an on-line microwave FIA system for catalytic kinetic determination of iridium(III)

A new rapid, selective and sensitive on-line microwave flow injection-kinetic method was developed for spectrophotometric determination of micro amounts of Ir(III), based on its catalytic effect on the m-acetylchlorophosphonazo (CPA-mA) and KIO(4) reaction in NaOH media. An on-line microwave oven was employed to accelerate the reaction. The reaction was followed spectrophotometrically by measuring the decrease of the absorbance of CPA-mA at 580 nm. The effect of five variables for the determination of Ir(III) was optimized by means of a multilayer artificial neural network using extended delta-bar-delta (EDBD) algorithms. Under the optimum experimental conditions, Ir(III) could be determined in the range 0.060-0.60 micro gZZZ;mL(-1) with detection limit of 0.02 micro gZZZ;mL(-1) and the sampling frequency of 34 h(-1). The proposed method was applied to the determination of micro amounts of Ir(III) in refined ore and secondary alloy with the recoveries from 91.4% to 109%.     

Mesoscale organization of CuO nanoribbons: formation of "dandelions"

A two-tiered organizing scheme with multiple-length scales for construction of dandelion-like hollow CuO microspheres has been elucidated: (1) mesoscale formation of rhombic building units from smaller nanoribbons via oriented aggregation and (2) macroscopic organization of these units into the CuO microspheres. This self-assembly concept may also be applicable to other metal oxides by creating geometric constraints for constructional units.     

玉米叶片残体腐解过程的傅里叶变换红外光谱研究

采用傅里叶变换红外光谱对玉米植株叶片残体腐解过程进行了研究。结果表明，随着玉米叶片残体腐解的进行，羟基，酮碳基，甲基，在和次甲基的含量逐渐降收据 的含量增加。     

Enantioseparation of Amino Acid Derivatives with a Cellulose-Based Chiral Stationary Phase

Five structurally related amino acid derivatives were enantioseparated by HPLC with a commercially available chiral stationary phase, Chiralcel OD-H. The chromatographic experiments were performed in the normal phase mode. n-Hexane/polar alcohol was used as mobile phase. Excellent baseline enantioseparations could be obtained for all these solutes. The effects of the concentration of polar alcohol and the column temperature on the retentions and enantioseparations were studied in detail. From the van't Hoff plots the corresponding apparent thermodynamic parameters were derived. Mechanism aspects of chiral recognition were discussed based on the relationship between the thermodynamic parameters and the structures of the solutes. It was found that the substituent of the phenyl group on the residual group of the amino acid derivatives was close relevant to thermodynamic origin of enantioseparation. Much better enthalpy–entropy compensation effect was obtained by plotting the differential, rather than the original, thermodynamic parameters.