Planar Hall effect in biosensor with a tilted angle of the cross-junction

A typical planar Hall effect (PHE) sensor junction consists of two Hall bars that the bars appear normal to each other and the junction can have the required four terminals for current and voltage measurements. We are now introducing a tilted angle of the cross-junction and studying the role of the PHE therein. The results show that although there is a tilted angle of the cross-junction, the PHE voltage is remained constant. The result is interpreted by assuming the sensor material with the behavior of a basic single domain structure under the external magnetic field reversals. The calculations of the model are found to be in good concurrence with the experimental results.     

Cs–Ba separation using N2O as a reactant gas in a Multiple Collector-Inductively Coupled Plasma Mass Spectrometer collision-reaction cell: Application to the measurements of Cs isotopes in spent nuclear fuel samples

In the general frameworks of the nuclear fuel cycle and environmental research field, the Cs isotopic composition must be known with high precision and accuracy. The direct determination of Cs isotopes by mass spectrometry techniques is generally hampered by the presence of Ba isobaric interferences however. Here we present a new method which takes advantage of the collision-reaction cell based Multiple Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) and allows to analyse Cs isotopes in the presence of Ba without prior separation step. The addition of N₂O gas in the cell leads to an antagonistic behavior of Cs⁺ and Ba⁺ as the latter reacts with the gas to form BaO⁺ and BaOH⁺ products whereas Cs⁺ remains unreactive. The efficiency of the method was demonstrated for an UOx sample by comparing the results obtained (1) from the measurements of pure Cs fractions and (2) from Fission Products fractions containing more than 30 ionisable elements in addition to Cs, Ba, and where U and Pu were previously removed by using ion exchange resin. An excellent agreement is achieved between each set of experiments with an external reproducibility always better than 0.5% (RSD, k = 2). This study confirms the strong potential of collision–reaction cell to measure Cs isotopes in presence of interfering Ba, precluding therefore former systematic chemical separations.     

Lactic acid in solution: investigations of lactic acid self-aggregation and hydrogen bonding interactions with water and methanol using vibrational absorption and vibrational circular dichroism spectroscopies

The infrared vibrational absorption (VA) and vibrational circular dichroism (VCD) spectral features of L-(+)-lactic acid (LA) in CDCl3 solution are concentration dependent, showing evidence of oligomerization with increasing concentrations. To understand the observed spectra, geometry optimizations, vibrational frequencies, and VA and VCD intensities were evaluated for (LA)n with n=1-4 using density functional theory calculations at the B3LYP6-311++G(d,p), B3LYP/cc-pVTZ, and in some cases, B3LYP/aug-cc-pVTZ levels of theory. Comparisons with the experimental spectra indicate that the lowest energy LA dimer (AA), formed by two C Double Bond O...HO hydrogen bonds, is one of the dominating species in solution at room temperature. Possible contributions from the LA trimer and tetramer are also discussed. To model the VA and VCD spectra of LA in water and in methanol, both implicit polarizable continuum model and explicit hydrogen bonding considerations were used. For explicit hydrogen bonding, geometry optimizations of the AA-(water)n and AA-(methanol)n complexes, with n=2,4,6, were performed, and the corresponding VA and VCD spectra were simulated. Comparisons of the calculated and experimental VA and VCD spectra in the range of 1000-1800 cm(-1) show that AA-(water)n with n=6 best reproduces the experimental spectra in water. On the other hand, AA-(methanol)n with n=2 reproduces well the experimental results taken in methanol solution. In addition, we found evidence of chirality transfer, i.e., some vibrational bands of the achiral water subunits gain VCD strength upon complexation with the chiral LA solute. The study is the first to use VCD spectroscopy to probe the structures of LA aggregates and hydrogen bonding solvation clusters in the solution phase.     

Simultaneous Determination of Paracetamol,Ibuprofen, and Caffeine in Tablets by Molecular Absorption Spectroscopy Combined with Classical Least Square Method

In this paper, the classical least-squares (CLS) method with molecular absorption spectrophotometric measurement was used to determine simultaneously paracetamol (PAR), ibuprofen (IBU), and caffeine (CAF) in tablets. The absorbance spectra of the standard solutions and samples were measured over a wavelength from 220 to 300 nm with a 0.5 nm step. The concentration of PAR, IBU, and CAF in the sample solutions was calculated by using Visual Basic for Applications (VBA) and a program called CLS-Excel written in Microsoft Excel 2016. The method and the CLS-Excel program were tested on mixed standard laboratory samples with different PAR, IBU, and CAF concentration ratios, and they showed only small errors and a satisfying repeatability. An analytical procedure for tablets containing PAR, IBU, and CAF was developed. The reliability of the procedure was proved via the recovery and repeatability of the analysis results with an actual tablet sample and by comparing the mean contents of active substances in the tablets obtained from the analytical procedure with the HPLC method. The procedure is simple with a reduced cost compared with the HPLC standard method.     

Chemical Constituents of the Leaves of Artocarpus integer

Chemistry of Natural Compounds -     

Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

Self-assembled free-floating nanomaterials from sequence-defined polymers

Sequence-defined polymers can be programmed to self-assemble into precise nanostructures for applications in biosensing, drug delivery, optics, and molecular computation. Inspired by the natural self-assembly processes present in biological protein and DNA systems, sets of molecular design rules have emerged across materials classes as instructions to build a variety of tunable structures. This review highlights recent advances in self-assembled sequence-defined and sequence-specific polymers across peptides, peptoids, DNA, and non-biological synthetic materials, with a focus on synthesis, assembly processes and overall structure. Specifically, these self-assembled structures are free-floating, as such constructs can potentially serve as a platform for the aforementioned applications. Emphasis is placed on the molecular design of polymers that self-assemble into zero-dimensional, one-dimensional, two-dimensional, or three-dimensional nanostructures. With the development of automated syntheses and increasing control over self-assembly, future work may focus on emerging classes of compatible hybrid materials with exciting directions toward new architectures and applications.     

Alpha-Glucosidase Inhibitory Diterpenes from Euphorbia antiquorum Growing in Vietnam

Bioactive-guided phytochemical investigation of Euphorbia antiquorum L. growing in Vietnam led to the isolation of five ent-atisanes, one seco-ent-atisane, and one lathyrane (ingol-type). The structures were elucidated as ent-1α,3α,16β,17-tetrahydroxyatisane (1), ethyl ent-3,4-seco-4,16β,17-trihydroxyatisane-3-carboxylate (2), ent-atisane-3-oxo-16β,17-acetonide (3), ent-3α-acetoxy-16β,17-dihydroxyatisane (4), ent-16β,17-dihydroxyatisane-3-one (5), calliterpenone (6), and ingol 12-acetate (7). Their chemical structures were unambiguously determined by analysis of one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) and high resolution mass spectrometry, as well as by comparison with literature data. Among them, 1 is a new compound while 2 is an ethylated artifact of ent-3,4-seco-4,16β,17-trihydroxyatisane-3-carboxylic acid, a new compound. Isolates were evaluated for alpha-glucosidase inhibition. Compound 3 showed the most significant inhibitory activity against alpha-glucosidase with an IC₅₀ value of 69.62 µM. Further study on mechanism underlying yeast alpha-glucosidase inhibition indicated that 3 could retard the enzyme function by noncompetitive.