Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Synthesis of functionalized N-triazolyl maleimides

An easy and mild two-step one-pot reaction allowed the synthesis of functionalized N-triazolyl maleimide. Next, the addition of propargyl alcohol and propargyl amine to the N-acyliminium ion mediated by Lewis acid, In(OTf)₃, allowed the introduction of a second 1,2,3-triazol ring at position 5 of the amide. The products in both reactions were achieved in moderate to good yields.     

Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Multifunctional natural fibers: the potential of core shell MgO–SiO2 nanoparticles

Cellulose - Core–shell nanoparticles (NPs) based on metal oxides, namely magnesium oxide (MgO) and silica (SiO2), are a fantastic alternative for natural fibers’ functionalization. In...     

Fabrication of a Simple and Cheap Screen-printed Silver/Silver Chloride (Ag/AgCl) Quasi-reference Electrode

In this work, a silver/silver chloride ink is fabricated using two steps. First the silver ink is prepare using silver, nail polish and acetone. Then the silver ink is painted in a paper substrate and a silver chloride layer is deposited using a bleach solution. The result is the silver/silver chloride conductive ink. The silver ink is cheap ($2.49/g), well-dispersive and very easy to fabricate. The materials were characterized by SEM and XRD. The Ag ink showed the formation of a continuous network throughout the silver ink film with fewer agglomeration. The effective chlorination process was also observed in the Ag/AgCl characterization. Since the Ag/AgCl substrate will be used as a quasi-reference electrode, it is important to investigate the electrical properties. The Ag ink showed an average ohmic resistance of 2.27 Ω. The addition of the AgCl layer decreases the conductivity, as expected. In summary, the Ag/Ag/Cl ink developed is simple, well-dispersed, cheap and with good conductivity. Therefore, it can be used as a conductive ink in the fabrication of quasi-reference electrodes.     

Preparation and characterization of microcapsules loaded with polyphenols-enriched Uncaria tomentosa extract using spray-dryer technique

Journal of Thermal Analysis and Calorimetry - This work prepared and characterized microcapsule of Uncaria tomentosa (UT) in order to standardize a spray-dryer Uncaria tomentosa extract. The UT...     

Chemical Composition and Antioxidant Activity of Essential Oils from Eugenia patrisii Vahl,E. punicifolia (Kunth) DC., and Myrcia tomentosa (Aubl.) DC., Leaf of Family Myrtaceae

Essential oils (EOs) were extracted from Eugenia patrisii, E. punicifolia, and Myrcia tomentosa, specimens A and B, using hydrodistillation. Gas chromatography coupled with mass spectrometry (GC/MS) was used to identify the volatile constituents present, and the antioxidant capacity of EOs was determined using diphenylpicryl-hydrazyl (DPPH) and trolox equivalent antioxidant capacity (TEAC) assays. For E. patrisii, germacrene D (20.03%), bicyclogermacrene (11.82%), and (E)-caryophyllene (11.04%) were identified as the major constituents of the EOs extracted from specimen A, whereas specimen B primarily comprised γ-elemene (25.89%), germacrene B (8.11%), and (E)-caryophyllene (10.76%). The EOs of E. punicifolia specimen A contained β-Elemene (25.12%), (E)-caryophyllene (13.11%), and bicyclogermacrene (9.88%), while specimen B was composed of (E)-caryophyllene (11.47%), bicyclogermacrene (5.86%), β-pinene (5.86%), and γ-muurolene (5.55%). The specimen A of M. tomentosa was characterized by γ-elemene (12.52%), germacrene D (11.45%), and (E)-caryophyllene (10.22%), while specimen B contained spathulenol (40.70%), α-zingiberene (9.58%), and γ-elemene (6.89%). Additionally, the chemical composition of the EOs was qualitatively and quantitatively affected by the collection period. Furthermore, the EOs of the studied specimens, especially specimen A of E. punicifolia, showed a greater antioxidant activity in DPPH rather than TEAC, as represented by a significantly high inhibition percentage (408.0%).     

Chemical Composition of Volatile Compounds in Apis mellifera Propolis from the Northeast Region of Pará State,Brazil

Propolis is a balsamic product obtained from vegetable resins by exotic Africanized bees Apis mellifera L., transported and processed by them, originating from the activity that explores and maintains these individuals. Because of its vegetable and natural origins, propolis is a complex mixture of different compound classes; among them are the volatile compounds present in the aroma. In this sense, in the present study we evaluated the volatile fraction of propolis present in the aroma obtained by distillation and simultaneous extraction, and its chemical composition was determined using coupled gas chromatography, mass spectrometry, and flame ionization detection. The majority of compounds were sesquiterpene and hydrocarbons, comprising 8.2–22.19% α-copaene and 6.2–21.7% β-caryophyllene, with additional compounds identified in greater concentrations. Multivariate analysis showed that samples collected from one region may have different chemical compositions, which may be related to the location of the resin’s production. This may be related to other bee products.     

Structural and electronic properties of amorphous bismuth calcium borate from first-principle calculations

Structural Chemistry - We investigatethe electronic and structural properties of two new amorphous materials, Bi6Ca2O28B12 and Bi6Ca2 O28B11:Tm, using density functional theory with a short-range...     

High-resolution heteronuclear correlation spectroscopy in solid state NMR of aligned samples

A new two-dimensional scheme is proposed for accurate measurements of high-resolution chemical shifts and heteronuclear dipolar couplings in NMR of aligned samples. Both the (1)H chemical shifts and the (1)H-(15)N dipolar couplings are evolved in the indirect dimension while the (15)N chemical shifts are detected. This heteronuclear correlation (HETCOR) spectroscopy yields high-resolution (1)H chemical shifts split by the (1)H-(15)N dipolar couplings in the indirect dimension and the (15)N chemical shifts in the observed dimension. The advantages of the HETCOR technique are illustrated for a static (15)N-acetyl-valine crystal sample and a (15)N-labeled helical peptide sample aligned in hydrated lipid bilayers.