<Emphasis Type="Italic">p</Emphasis>-Adic probability logics

This paper represents an comprehensive overview of the results from three papers where we developed several propositional logics for reasoning about p-adic valued probability.Each of these logics is a sound, complete and decidable extension of classical propositional logic.     

Phenolic natural products of the wines obtained from three new Merlot clone candidates

This work aimed to evaluate the total contents of polyphenolics (the Ribereau-Gayon–Maurié procedure), anthocyanins (using pH differential method) and tannins (the Nègre procedure) as well as the content of phenolic acids (using UPLC/MS chromatography), respectively of the wines obtained from three new Merlot clone candidates in the perennial clonal selection. The aforementioned chemical parameters were determined in the samples covering the period 2009–2012. In comparison both with the standard Merlot wine (mother vine) and the wines obtained from other two clone candidates, the Merlot wine of the clone candidate No. 022 was found to have the highest total content of all three examined components 1.89 ± 0.05 g/L (polyphenolics), 185.59 ± 5.00 mg/L (anthocyanins) and 1.11 ± 0.03 g/L (tannins), as well as six phenolic acids including gallic acid (25.49 ± 0.27 mg/L). These findings are in good agreement with the observed trend for the viticultural parameters indicating the clone candidate No. 022 as more promising than mother.     

Low-lying spectrum of the Y-string three-quark potential using hyper-spherical coordinates

We calculate the energies of three-quark states with definite permutation symmetry (i.e. of SU(6) multiplets) in the N=0, 1, 2 shells, confined by the Y-string three-quark potential. The exact Y-string potential consists of one term, the so-called three-string term, and three angle-dependent two-string terms. Due to this technical complication we treat the problem at three increasingly accurate levels of approximation: (1) the (approximate) three-string potential expanded to first order in trigonometric functions of hyper-spherical angles; (2) the (approximate) three-string potential to all orders in the power expansion in hyper-spherical harmonics, but without taking into account the transition(s) to two-string potentials; (3) the exact minimal-length string potential to all orders in a power expansion in the hyper-spherical harmonics, and taking into account the transition(s) to two-string potentials. We show the general trend of improvement of these approximations: the exact non-perturbative corrections to the total energy are of the order of one per cent, as compared with approximation (2), yet the exact energy differences between the [20,1⁺],[70,2⁺],[56,2⁺],[70,0⁺]-plets are shifted to 2:2:0.9, from the Bowler and Tynemouth separation rule 2:2:1, which is obeyed by approximation (2) at the one per cent level. The precise value of the energy separation of the first radial excitation (“Roper”) [56^′,0⁺]-plet from the [70,1⁻]-plet depends on the approximation, but does not become negative, i.e. the “Roper” remains heavier than the odd-parity [70,1⁻]-plet in all of our approximations.     

3D-CT(Computer Tomography) Measurement of an Instantaneous Density Distribution of Turbulent Flames with a Multi-Directional Quantitative Schlieren Camera (Reconstructions of High-Speed Premixed Burner Flames with Different Flow Velocities)

In order to provide a suitable technique for 3D observation of high speed turbulent flames, non-scanning 3D-CT(Computer Tomography) technique using a multi-directional quantitative schlieren system with flash light source, is proposed for instantaneous density distribution of unsteady premixed flames. This “schlieren 3D-CT” is based on (i)simultaneous acquisition of flash-light schlieren images taken from numerous directions, and (ii) 3D-CT reconstruction of the images by an appropriate CT algorithm. In this paper, first, as a preliminary research, 3D-CT reconstruction of non-axisymmetric steady flame is made with a single-directional quantitative schlieren system. Next, with custom-made 20 directional schlieren camera, instantaneous density distributions of a high-speed turbulent flames of nozzle exit velocities of 8.0 and 10.0 m/s has been CT-reconstructed. The 3D-views of the reconstructed flame front shape clearly give the information of the flame structure with fine scale corrugations. Based on the distributions, area-enlargement rates of the flame front area are derived, and investigated.     

Isolation of Hemoglobin from Bovine Erythrocytes by Controlled Hemolysis in the Membrane Bioreactor

In this work, we describe an optimized procedure based on gradual hemolysis for the isolation of hemoglobin derived from bovine slaughterhouse erythrocytes in a membrane bioreactor. The membrane bioreactor system that provided high yields of hemoglobin (mainly oxyhemoglobin derivate) and its separation from the empty erythrocyte membranes (ghosts) was designed at a pilot scale. Ten different concentrations of hypotonic media were assessed from the aspect of the extent of hemolysis, hematocrit values of the erythrocyte suspensions, cell swelling, and membrane deformations induced by decreased salt concentration. Effective gradual osmotic hemolysis with an extent of hemolysis of 88% was performed using 35 mM Na-phosphate/NaCl buffer of pH 7.2–7.4. Under these conditions most of the cell membranes presented the appearance of the normal ghosts under phase contrast microscope. The hemoglobin purity of >80% was confirmed by SDS-PAGE. Kinetic studies showed that maximal concentration of hemoglobin was reached after 40 min, but the process cycle at which recovery of 83% was achieved lasted for 90 min. The dynamics of both steps, (1) transport through the membrane of erythrocytes during process of hemolysis and (2) transport through the reactor filters, were evaluated.     

Dimethyl(2-oxo-2-ferrocenylethyl)sulfonium iodide—a useful synthetic equivalent of ferrocenoylcarbene in the synthesis of ferrocene-containing cyclopropanes

The reaction of 1-ferrocenyl-3-thiabutan-1-one with methyl iodide in acetonitrile at room temperature gave dimethyl(2-oxo-2-ferrocenylethyl)sulfonium iodide, which was characterized by spectral data (¹H NMR, ¹³C NMR, IR) and X-ray crystallographic analysis. This salt reacted with a base (sodium hydride) in acetonitrile yielding a stabilized ylide—dimethylsulfonium ferrocenoylmethylide, which was in turn, submitted to reactions with seven conjugated enones. The obtained results showed that this methodology is potentially a new and useful approach to ferrocene-containing cyclopropanes.     

Effect of the size of experimental channels of the lead slowing-down spectrometer SVZ-100 (Institute for Nuclear Research, Moscow) on the moderation constant

Lead slowing-down (LSD) spectrometers have a low energy resolution (about 30%), but their luminosity is 10³ to 10⁴ times higher than that of time-of-flight (TOF) spectrometers. A high luminosity of LSD spectrometers makes it possible to use them to measure neutron cross section for samples of mass about several micrograms. These features specify a niche for the application of LSD spectrometers in measuring neutron cross sections for elements hardly available in macroscopic amounts—in particular, for actinides. A mathematical simulation of the parameters of SVZ-100 LSD spectrometer of the Institute for Nuclear Research (INR, Moscow) is performed in the present study on the basis of the MCNPX code. It is found that the moderation constant, which is the main parameter of LSD spectrometers, is highly sensitive to the size and shape of detecting volumes in calculations and, hence, to the real size of experimental channels of the LSD spectrometer.     

Synthesis of polyrotaxanes from acetyl-β-cyclodextrin

Polyrotaxanes are intermediary products in the synthesis of topological gels. They are created by inclusion complex formation of hydrophobic linear macromolecules with cyclodextrins or their derivatives. Then, pairs of cyclodextrin molecules with covalently linkage were practically forming the nodes of the semi-flexible polymer network. Such gels are called topological gels and they can absorb huge quantities of water due to the net flexibility allowing the poly(ethylene oxide) chains to slide through the cyclodextrin cavities, without being pulled out altogether. For polyrotaxane formation poly(ethylene oxide) was used like linear macromolecules. There are hydroxyl groups at poly(ethylene oxide) chains, whereby the linking of the voluminous molecules should be made. To avoid the reaction of cyclodextrin OH groups with stoppers, they should be protected by, e.g., acetylation. In this work, the acetylation of the OH groups of β-cyclodextrin was performed by acetic acid anhydride with iodine as the catalyst. The acetylation reaction was assessed by the FTIR and HPLC method. By the HPLC analysis was found that the acetylation was completed in 20 minutes. Inserting of poly(ethylene oxide) with 4000 g/mol molecule mass into acetyl-β-cyclodextrin with 2:1 poly(ethylene oxide) monomer unit to acetyl-β-cyclodextrin ratio was also monitored by FTIR, and it was found that the process was completed in 12 h at the temperature of 10°C. If the process is performed at temperatures above 10°C, or for periods longer than 12 hours, the process of uncontrolled hydrolysis of acetate groups was initiated.