Synthesis of Novel <Emphasis Type="Italic">D</Emphasis>-<Emphasis Type="Italic">Seco</Emphasis>-Pregnenes

Summary. A new synthetic route was developed for the preparation of trans-3-hydroxy-16,17-seco-pregna-5,17(20)-dien-16-al, using Grob fragmentation as the key step. This seco-steroid contains a formyl group and an unsaturated side-chain in a sterically favourable position, and is therefore a promising starting material for the synthesis of novel condensed steroid heterocycles.Received March 22, 2003; accepted April 22, 2003 Published online September 25, 2003     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Mercury-free sono-electroanalytical detection of lead in human blood by use of bismuth-film-modified boron-doped diamond electrodes

We report the electroanalytical determination of lead by anodic stripping voltammetry at in-situ-formed, bismuth-film-modified, boron-doped diamond electrodes. Detection limits in 0.1 mol L^–1 nitric acid solution of 9.6x10^–8 mol L^–1 (0.2 ppb) and 1.1x10^–8 mol L^–1 (2.3 ppb) were obtained after 60 and 300 s deposition times, respectively. An acoustically assisted deposition procedure was also investigated and found to result in improved limits of detection of 2.6×10^–8 mol L^–1 (5.4 ppb) and 8.5×10^–10 mol L^–1 (0.18 ppb) for 60 and 300 s accumulation times, respectively. Furthermore, the sensitivity obtained under quiescent and insonated conditions increased from 5.5 (quiescent) to 76.7 A mol^–1 L (insonated) for 60 s accumulation and from 25.8 (quiescent) to 317.6 A mol^–1 L (insonated) for 300 s accumulation. Investigation of the use of ultrasound with diluted blood revealed detection limits of the order of 10^–8 mol L^–1 were achievable with excellent inter- and intra-reproducibility and sensitivity of 411.9 A mol^–1 L . For the first time, electroanalytical detection of lead in diluted blood is shown to be possible by use of insonated in-situ-formed bismuth-film-modified boron-doped diamond electrodes. This method is a rapid, sensitive, and non-toxic means of clinical sensing of lead in whole human blood.     

Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiplasmodial and Antitrypanosomal Activities

Summary. 4-Aminobicyclo[2.2.2]octanones were converted to their N-oxides and to 4-aminobicyclo[2.2.2]octanes. Furthermore, the 6,7-bis-(4-methoxyphenyl) analogues were synthesized. All products were screened for their activities against Trypanosoma b. rhodesiense and Plasmodium falciparum. The pharmacological results were compared with those of formerly tested bicyclo[2.2.2]octanones and bicyclo[2.2.2]octanols. Structure-activity relationships are discussed.Received April 8, 2003; accepted April 14, 2003 Published online September 25, 2003     

Access to the structures of fluoromagnesium compounds: synthesis and structural characterization of the β-diketiminato magnesium fluoride [{CH(CMeNAr)2}Mg(μ-F)(THF)]2·toluene

β-Diketiminato magnesium fluoride [{CH(CMeNAr)₂}Mg(μ-F)(THF)]₂·toluene (Ar=2,6-i-Pr₂C₆H₃, 2·toluene) was synthesized. The molecular structure of 2 revealed for the first time, the double fluoro bridge feature between the two magnesium atoms with a typical MgF bond length (average 1.95 Å).     

The synthesis and characterisation of 1′-ethynyl-2,5-dimethylazaferrocene and derivatives

The synthesis of 1′-ethynyl-2,5-dimethylazaferrocene is reported along with its cyclic voltammetry measurements and the X-ray structure determination of its W(CO)₅-complex. Basic coordination and organic chemistry of 1′-ethynyl-2,5-dimethylazaferrocene is also presented via derivatives incorporating cis-Pt(dppe) and Si(Et)₃ units.