Gold nanoparticle-templated assembly of oligothiophenes: preparation and film properties

Terthiophene-appended gold nanoparticles were prepared by the reduction of AuCl₄⁻(C₈H₁₇)₄N⁺ with NaBH₄ in the presence of bis[2,5-di(3-hexylthiophen-2-yl)thiophene-3-carboxyloxyhexanyl]disulfide. A hexagonal self-assembly of particles with gold core diameters (1.9±0.1 nm) was detected by high-angle annular dark-field scanning transmission electron microscopy. The electric conductivity of the iodine-doped film was 9.1×10⁻⁶ S cm⁻¹, which was ascribable to the terthiophene-based inter-ligand π-π interactions. The Au/terthiophene hybrid spin-coated film consisted of a highly three-dimensional assembled structure of terthiophenes, as inferred from grazing-incidence small-angle X-ray scattering, indicating that such monodispersed and small-sized gold nanoparticles can serve as a template for this organization. In this study, a gold nanoparticle-templated assembly of oligothiophenes has been fabricated for proposing a method to develop tailor-made organizations of π-conjugated oligomers.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Analysis of Th, U, Pu, and Am in radioactive metal waste using extraction chromatography

In order to analyze actinide elements in radioactive metal waste, the dissolution and chemical separation conditions were optimized. The surfaces of a type 304 stainless steel plate and of pipe waste sampled from the prototype advanced thermal reactor (Fugen) were dissolved in mixed acid solution (HNO₃:HCl:H₂O = 1:1:4). The resulting solution was evaporated to dryness and dissolved with 2 mol/dm³ of HNO₃ to prepare sample solutions. In order to analyze trivalent actinide elements in the sample solution containing a large amount of Fe(III) (>0.1 g) using TRU resin, the effect of Fe(III) concentration on the recovery of Am(III) and reduction effect of Fe(III) to Fe(II) with ascorbic acid were studied. On the basis of results of this study, chemical separation scheme was constructed and Pu and Am in the sample solutions were separated. Thorium and U in the sample solutions were separated with UTEVA resin. High recoveries for all experimented elements were obtained from the analysis of spiked sample solutions, the effectiveness of the method was confirmed.     

A novel dinuclear cyclometalated iridium complex bridged with 1,4-bis[pyridine-2-yl]benzene: its structure and photophysical properties

The synthesis, structure, and photophysical properties of a new cyclometalated dinuclear iridium complex, (ppy)2Ir(mu-BPB)Ir(ppy)2 [ppy = 2-phenylpyridine, BPB = 1,4-bis(pyridin-2-yl)benzene], have been investigated.     

Noncatalytic kinetic study on site-selective H/D exchange reaction of phenol in sub- and supercritical water

The site-selective H/D exchange reaction of phenol in sub- and supercritical water is studied without added catalysts. In subcritical water in equilibrium with steam at 210-240 degrees C, the H/D exchange proceeds both at the ortho and para sites in the phenyl ring, with no exchange observed at the meta site. The pseudo-first-order rate constants are of the order of 10(-4) s(-1); 50% larger for the ortho than for the para site. In supercritical water, the exchange is observed also at the meta site with the rate constant in the range of 10(-6)-10(-4) s(-1). As the bulk density decreases, the exchange slows down and the site selectivity toward the ortho is enhanced. The enhancement is due to the phenol-water interaction preference at the atomic resolution. The site selectivity toward the ortho is further enhanced when the reaction is carried out in benzene/water solution. Using such selectivity control and the reversible nature of the hydrothermal deuteration/protonation process, it is feasible to synthesize phenyl compounds that are deuterated at any topological combination of ortho, meta, and para sites.     

Thermodynamic properties of the Cu-Au system using a face-centered-cubic lattice model with a renormalized potential

A Monte Carlo simulation is carried out to study thermodynamic properties of Cu-Au alloys using a face-centered-cubic (fcc) lattice-gas model. To obtain quantitatively accurate results, a Finnis-Sinclair-type potential, which has been widely used for molecular dynamics (MD) simulations, is employed. To overcome some shortcomings of lattice-gas models such as neglecting vibrational entropy, the potential is mapped onto the fcc lattice using the renormalization technique. The renormalized potential gives an improved Cu-Au phase diagram compared to the original MD potential applied directly on the lattice.     

Preparation of Metallaiminophosphoranes and Their Reactivity

Treatment of [Cp*(CO) 2 M{P(NHPh)(OMe) 2 }]PF 6 (M = Fe and Ru) with NaNH 2 gives metallaiminophosphoranes, Cp*(CO) 2 M{P(NPh)(OMe) 2 }. The x-ray structures and reactivity of the complexes are reported.     

Metal Ionically-controlled Optical Signaling Based on a Chromoionophore-derived Calix[4]crown

A chromoionophore-derived calix[4]crown, 1 , possessing an effective signal-controllable function by metal ionic inputs has been newly synthesized, whose function is mainly of our interest, by transforming the process of receptor activation to one that may be detected by an optical signal (i.e. color change), the basic feature of antagonist-agonist competition may be reproduced readily and visually detected. The process would be particularly new within the field of optical read-out receptors. Further, from the standpoint of material sciences, the controllable signal function may not only be welcome for molecular information processing, but also contribute to the design of new sensory materials.     

Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.