glucoBox--a new carbohydrate-based bis(oxazoline) ligand. Synthesis and first application

The synthesis of a new bis(oxazoline) ligand from D-glucosamine and its application in enantioselective copper(I) catalysed cyclopropanations of olefins is described.     

Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and Raman spectroscopies

Poly(lactic-co-glycolic) acid (PLGA) is an important copolymer used in drug delivery platforms where controlled release is required. In this work we investigated the in vitro degradation of four PLGA copolymers with L/G molar compositions of 50/50, 65/35, 75/25 and 95/5. ATR-IR and Raman spectroscopies were used to differentiate and quantify the degradation rates of glycolic and lactic units. Both techniques were used to determine the polymer composition as a function of degradation time and the degradation rate constants for the hydrolysis of glycolic and lactic units were calculated using a 1st order kinetics approach. Our results revealed a two stage process for the degradation of PLGA cast films in PBS in agreement with our previous work. The degradation rate constant for glycolic unit was found to be 1.3 times higher than for lactic units. In addition the degradation rate constants for L and G units were shown to decrease proportionally with increasing initial lactic content of the copolymer used to prepare the films.     

Enzyme analysis by means of the air-gap electrode-determination of urease and arginase by monitoring of the initial reaction rate

The air-gap electrode has been used in kinetic chemical analysis, illustrated by the assay of the activities of the enzymes urease and arginase. The determinations are based on monitoring the initial reaction rates of the selective release of ammoniacal nitrogen, which in the arginine—arginase system was ensured by adding excess of urease. The reaction rates measured are in the range 2.5 · 10^-5—1.5 · 10^-3M min^-1; the relative standard deviation is ca. 2.8 %.     

Cu-catalyzed tandem C-N bond formation for the synthesis of pyrroles and heteroarylpyrroles

A highly efficient Cu-catalyzed tandem C-N bond-forming reaction of 1,4-dihalo-1,3-dienes has been developed. The transformation allows the synthesis of pyrroles and heteroarylpyrroles with a wide variety of functional groups and substitution patterns from readily available precursors.     

Highly efficient and mild synthesis of variously 5-substituted-4-carbaldehyde-1,2,3-triazole derivatives

Synthesis of variously 5-substituted-4-carbaldehyde-1,2,3-triazole derivatives 2 was accomplished by reacting sodium azide with ,β-acetylenic aldehydes 1 in DMSO at room temperature. Therefore, the reaction remains basic avoiding the generation of the hazardous explosive HN₃, resulting in a safe process. This mild and general reaction was instantaneous and was essentially quantitative.     

Insights into the Retention Mechanism for Small Neutral Compounds on Silica-Based Phenyl Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on phenylhexylsiloxane- and pentafluorophenylpropylsiloxane-bonded superficially porous silica stationary phases (Kinetex Phenyl-Hexyl and Kinetex F5) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation exchange) are important for the retention of weak bases for acetonitrile–water mobile phases, but virtually absent for the same compounds for methanol–water mobile phases. The selectivity of the Kinetex Phenyl-Hexyl stationary phase for small neutral compounds is similar to an octadecylsiloxane-bonded silica stationary phase with similar morphology Kinetex C-18 for both methanol–water and acetonitrile–water mobile phase compositions. The Kinetex Phenyl-Hexyl and XBridge Phenyl stationary phases with the same topology but different morphology are selectivity equivalent, confirming that solvation of the interphase region can be effective at dampening selectivity differences for modern stationary phases. Small selectivity differences observed for XTerra Phenyl (different morphology and topology) confirm previous reports that the length and type of space arm for phenylalkylsiloxane-bonded silica stationary phases can result in small changes in selectivity. The pentafluorophenylpropylsiloxane-bonded silica stationary phase (Kinetex F5) has similar separation properties to the phenylhexylsiloxane-bonded silica stationary phases, but is not selectivity equivalent. However, for method development purposes, the scope to vary separations from an octadecylsiloxane-bonded silica stationary phase (Kinetex C-18) to “phenyl phase” of the types studied here is limited for small neutral compounds. In addition, selectivity differences for the above stationary phases are enhanced by methanol–water and largely suppressed by acetonitrile–water mobile phases. For bases, larger selectivity differences are possible for the above stationary phases if electrostatic interactions are exploited, especially for acetonitrile-containing mobile phases.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

Electrochemical and electrocatalytic studies of the N,N′-(1R,2R)-(–)-1,2-cyclohexylenebis(salicylideneiminato)cobalt(II) complex

The electrochemical properties and catalytic activity of a Co(II) complex with the optically active Schiff base derived from (1R,2R)-(–)-cyclohexanediamine and salicylaldehyde have been studied in non-aqueous solutions. When dissolved in deoxygenated non-aqueous solutions, the complex exhibits reversible redox properties for the Co(II)/Co(III) couple. Electrochemical reduction of oxygen and oxidation of cobalt(II) was observed on cyclic voltammograms of solutions containing both dioxygen and the Schiff base-cobalt(II) complex. An anodically formed film on a platinum electrode, studied by means of X-ray photoelectron spectroscopy, revealed the presence of the oxidized Co(III) species. Cyclic voltammetry of oxygenated solutions examined after a period of time indicates an electrochemical activity of coordinated superoxo/peroxo species in the 0.7–1.1 V potential range. In the presence of 4-methyl-1-cyclohexene the cyclic voltammetry curves reveal changes similar to those caused by the removal of oxygen. The GC-MS technique was used to identify some of the products formed by the catalytic oxidation of cyclohexene and 4-methyl-1-cyclohexene. Electronic Publication     

Uncatalyzed,Regioselective Oxidation of Saturated Hydrocarbons in an Ambient Corona Discharge

Atmospheric pressure chemical ionization (APCI) in air or in nitrogen with just traces of oxygen is shown to yield regioselective oxidation, dehydrogenation, and fragmentation of alkanes. Ozone is produced from ambient oxygen in situ and is responsible for the observed ion chemistry, which includes partial oxidation to ketones and C?C cleavage to give aldehydes. The mechanism of oxidation is explored and relationships between ionic species produced from individual alkanes are established. Unusually, dehydrogenation occurs by water loss. Competitive incorporation into the hydrocarbon chain of nitrogen versus oxygen as a mode of ionization is also demonstrated.     

Super‐Chelators for Advanced Protein Labeling in Living Cells

Live‐cell labeling, super‐resolution microscopy, single‐molecule applications, protein localization, or chemically induced assembly are emerging approaches, which require specific and very small interaction pairs. The minimal disturbance of protein function is essential to derive unbiased insights into cellular processes. Herein, we define a new class of hexavalent N‐nitrilotriacetic acid (hexaNTA) chelators, displaying the highest affinity and stability of all NTA‐based small interaction pairs described so far. Coupled to bright organic fluorophores with fine‐tuned photophysical properties, the super‐chelator probes were delivered into human cells by chemically gated nanopores. These super‐chelators permit kinetic profiling, multiplexed labeling of His₆‐ and His₁₂‐tagged proteins as well as single‐molecule‐based super‐resolution imaging.