Radiationless transitions in trivalent lanthanide ions embedded in solids

Radiationless transitions in lanthanide ions embedded in glassy and crystalline hosts have been briefly reviewed. The correlations of multiphonon relaxation rates with energy gaps, vibrational frequencies, temperatures and electronic symmetries have been discussed. The essence of various theories, such as Nth order methods, non-adiabatic Hamiltonian method, dynamic coupling model has also been presented.     

Synthesis of cetyltrimethylammonium tribromide (CTMATB) and its application in the selective oxidation of sulfides to sulfoxides

The bright yellow crystalline cetyltrimethylammonium tribromide (CTMATB) reagent has been synthesized from the reaction of CTMAB and KBr with H₂MoO₄·H₂O, H₂O₂ and H₂SO₄ in the molar ratio 1:2:0.01:4:0.93. CTMATB selectively oxidizes a variety of dialkyl and alkyl aryl sulfides to the corresponding sulfoxides in high yields under mild conditions.     

Electrochemical Signal‐triggered Release of Biomolecules Functionalized with His‐tag Units

His‐tagged molecular species, a ferrocene derivative and Protein A, were immobilized on electrode surfaces (Au and graphite) through formation of a chelated complex in the presence of Cu²⁺ cations used as bridging units. The complex was cleaved and the attached molecules were released from the electrode surface by applying reductive potential to the electrodes resulting in Cu²⁺ reduction, thus decomposing the chelate complex. The molecule release process was followed by cyclic voltammetry in case of the ferrocene derivative. His‐tagged Protein A was additionally labeled with a fluorescent tag and its release was followed by fluorescence measurements in the solution and by impedance spectroscopy at the electrode. The studied release of the His‐tagged redox species and biomolecules was considered as a new generic approach to the signal‐controlled molecule release applicable in various biotechnological and biomedical applications.     

Study of layered silicate clays as synergistic nucleating agent for polypropylene

Effect of very small quantities of organically modified layered silicate clay on the nucleation of polypropylene (PP), as an additive at ppm levels dosage was investigated, in combination with two of the most commercially exploited organic nucleating agents, one of which is a cyclic aromatic phosphinate salt and the other is bis(3,4‐dimethylbenzylidene) sorbitol, each representing a separate class of nucleating molecules by itself. Substitution of a considerable fraction of either of these organic nucleating agents with organically modified inorganic nanoclay was seen to result in a unique synergy between the two in nucleating PP. Polarized light microscopy studies of these synergistic formulations with organoclay to nucleating agent ratios of 1:1 and 1:3 totaling 0.2 weight percent in PP showed significant reduction in spherulite size from that of non‐nucleated PP, and compared with the samples containing exclusive organic nucleating agent at similar loading. Differential scanning calorimetric studies provided evidence and insight into such synergistic behavior. Crystallization and supercooling temperatures for the synergistic formulations were comparable for those formulations containing only organic nucleating agents, indicating comparable nucleation efficiency, whereas organoclay alone, although showing some extent of nucleation, was clearly poorer in efficiency. Wide and small angle X‐ray scattering studies further explained these observations. An increase in the gamma polytype fraction was seen in samples that contained both organoclay and nucleating agent, pointing to the role of organoclay as a gamma nucleator. Organoclay was found to be completely exfoliated in these synergistic formulations and was seen as well‐dispersed, single platelets in the PP matrix. A hybrid network consisting of exfoliated organoclay platelets and organic nucleating agent molecules was proposed, which is more stable and stiffer than the network formed by nucleating agent alone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1786–1794, 2010     

UV light-assisted mineralisation and biodetoxification of Ponceau S with hydroxyl and sulfate radicals

The present study reports simultaneous mineralisation and biodetoxification of Ponceau S (3-hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium salt), an azo dye, by UV light assisted oxidation with hydroxyl and sulfate radicals. Metal ion catalysts used in the work were: Fe²⁺ and Ag⁺, and the oxidants used were: hydrogen peroxide and S₂O₈^2?. Strategies adopted to make the processes environmentally benign and economically viable by achieving maximum mineralisation in the shortest possible time are described. Mineralisation efficiency (Em) of various systems was found to follow the order: E_m(Fe²⁺/H₂O₂/UV) > E_m(Fe²⁺/S₂O₈^2?/UV) > E_m(Ag⁺/H₂O₂/UV) ≈ E_m(Ag⁺/S₂O₈^2?/UV). Thus, Fe²⁺ and HP are the most suitable metal ion catalyst and oxidant respectively, showing higher efficiency at pH 3 followed by that at pH 6.6. It is possible to enhance the Fe²⁺/H₂O₂/UV process electrical energy efficiency by maintaining the concentration of Fe at either 0.05 mM or 0.03 mM and that of the oxidant at 2.5 mM. The bioassay study revealed that the Fe²⁺/S₂O₈^2?/UV process biodetoxification efficiency is higher at pH 3 (93.7 %) followed by that at pH 6.6 (80.1 %) at the concentration of Fe ²⁺ and S₂O₈^2? of 0.03 mM and 2.5 mM, respectively. Thus, not only the concentration of Fe²⁺, but also the nature of the oxidant and pH play an important role in the biodetoxification process and S₂O₈^2? possesses higher biodetoxification efficiency than H₂O₂.     

Barbier coupling in water: SnCl2-mediated and Co(acac)2-catalyzed allylation of carbonyls

Co(acac)₂·2H₂O efficiently catalyzes SnCl₂-mediated Barbier coupling in water between carbonyls, including aromatic, aliphatic and α,β-unsaturated aldehydes, ketones, sugars and allyl bromide to afford the corresponding homoallylic alcohols in high yields. The catalyst was reused for several cycles with consistent activity.     

Piezoelectric resonators with mechanical damping and resistance in current conduction

A novel design method for high Q piezoelectric resonators was presented and proposed using the 3-D equations of linear piezoelectricity with quasi-electrostatic approximation which include losses attributed to mechanical damping in solid and resistance in current conduction. There is currently no finite element sofware for estimating the Q of a resonator without apriori assumptions of the resonator impedance or damping. There is a necessity for better and more realistic modeling of resonators and filters due to miniaturization and the rapid advances in frequency ranges in telecommunication. We presented new three-dimensional finite element models of quartz and barium titanate resonators with mechanical damping and resistance in current conduction. Lee, Liu and Ballato’s 3-D equations of linear piezoelectricity with quasi-electrostatic approximation which include losses attributed to mechanical damping in solid and resistance in current conduction were formulated in a weak form and implemented in COMSOL. The resulting finite element model could predict the Q and other electrical parameters for any piezoelectric resonator without apriori assumptions of damping or resistance. Forced and free vibration analyses were performed and the results for the Q and other electrical parameters were obtained. Comparisons of the Q and other electrical parameters obtained from the free vibration analysis with their corresponding values from the forced vibration analysis were found to be in excellent agreement. Hence, the frequency spectra obtained from the free vibration analysis could be used for designing high Q resonators. Results for quartz thickness shear AT-cut and SC-cut resonators and thickness stretch poled barium titanate resonators were presented. An unexpected benefit of the model was the prediction of resonator Q with energy losses via the mounting supports.     

Coumarine–imino–C2-glucosyl conjugate as receptor for Cu in blood serum milieu,on silica gel sheet and in Hep G2 cells and the characterization of the species of recognition

A coumarine–imino–C2-glucosyl conjugate (L) was synthesized and characterized. The conjugate L is found to recognize Cu²⁺ in aqueous HEPES buffer by exhibiting a 95% fluorescence quenching in pH range 7–10 even in the presence of several biologically and ecologically relevant metal ions. Fluorescence on–off behavior has been clearly demonstrated on the basis of the binding variability of Cu²⁺ to L. The binding has been elicited through the changes observed in fluorescence, absorption, ESI-MS and ¹H NMR titrations. All the other thirteen metal ions studied did not show any change in the fluorescence emission. These ions do not interfere with the recognition of Cu²⁺ by L. The structural features of [CuL]₂ complex in both the isomeric forms were established by DFT computational calculations. The utility of L has been demonstrated by showing its sensitivity toward Cu²⁺ on a thin layer of silica gel. The L gives sensitive fluorescence signals for Cu²⁺ even in blood serum and exhibits appropriate fluorescence responses in living cells.