Benzo[d]-1,2-oxaphospholes as precursors of stabilized C-centered radicals

[reaction: see text] Several benzo[d]-1,2-oxaphosphole 2-oxides were examined as potential precursors of stabilized C-centered radicals. The transient absorption spectra obtained after laser flash photolysis in the presence of di-tert-butyl peroxide showed the features of benzylic radicals with formation and decay kinetics not significantly influenced by the presence of oxygen. In the case of compounds with two possible diastereomeric forms, the C-H bond of the trans-isomers [corrected] is more reactive toward hydrogen abstraction.     

New synthetic routes to cationic rhenium tricarbonyl bipyridine complexes with labile ligands

Triflate abstraction from the complex [Re(OTf)(CO)(3)(bipy)] (1) using the salt NaBAr'(4) (Ar' = 3,5-bis(trifluoromethyl)phenyl) in dichloromethane solution in the presence of L = PPh(3), NCMe, NCPh, imines, ketones, Et(2)O, THF, MeOH, and MeI affords cationic complexes [Re(L)(CO)(3)(bipy)](+) as their BAr'(4)(-) salts. The new complexes have been characterized spectroscopically and, for [Re(eta(1)-O=C(Me)R)(CO)(3)(bipy)]BAr'(4) (R = CH(3), 6a; R = Ph, 6b), and [Re(THF)(CO)(3)(bipy)]BAr'(4) (9), also by single-crystal X-ray diffraction. Compared with conventional methodologies, the route reported here allows the coordination of a broader range of weakly coordinating ligands and requires considerably milder conditions. On the other hand, the reactions of lithium acetylides with [Re(THF)(CO)(3)(bipy)]BAr'(4) (9) can be used for the high-yield syntheses of rhenium alkynyls [Re(Ctbd1;CR)(CO)(3)(bipy)] (R = Ph, 12; R = SiMe(3), 13). Complex 9 was found to catalyze the aziridination of benzylideneaniline with ethyl diazoacetate.     

Amino acid end-group in commercial heparin. III. Determination of the number of amino groups of amino acid and hexosamine residues per heparin molecule

The reactions of heparin with 2,4,6-trinitrobenzenesulfonic acid (TNBS) were studied spectrometrically. Seven different commercial heparins were used in this study. The amino groups react with TNBS to form equimolar amounts of trinitrophenylated (TNP) amino groups and bisulfite ions. The TNP-amino groups further react with bisulfite ions to form the monosubstituted anionic sigma complex. The absorption spectrum with two maxima at approximately 350 nm and approximately 420 nm, characteristic of either the TNP-amino groups or the complex, was analyzed for the reaction of TNBS with heparin. It was shown that the reactivities of TNBS with amino groups from α-amino acid and hexosamine residues are greatly different. By combining the results of the reaction kinetics and the reaction of heparin with Sanger's reagent, the number of the α-amino groups and the free amino groups in hexosamine residues were determined. These data have been performed with a range of heparins from different commercial sources, of different activities and physical characteristics. No correlation was found between the free amino contents of these heparins and biological potency. © 1993 John Wiley & Sons, Inc.     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

On the synthesis of 3(5)-carbomethoxy-4-hetarylpyrazoles

3(5)-Carbomethoxy-4-hetarylpyrazoles 3 can be obtained by the aromatization of the corresponding cis-3-benzamido-3-carbomethoxy-4-hetaryl-Δ¹-pyrazolines 2 obtained by 1,3-dipolar cycloaddition of diazo-methane with methyl Z-2-benzamido-3-hetarylpropenoates 1. An explanation, based on FMO theory, for the different reactivity of the dipolarophiles with diazomethane is given.     

Synthesis and self-aggregation of cyclic alkynes containing helicene

[structure: see text]. All stereoisomers of a cyclic alkyne containing three helicene units, 1,12-dimethylbenzo[c]phenanthrene, are synthesized using a building block. Isomeric [3 + 3]cycloalkynes aggregate in organic solvents. Vapor pressure osmometry reveals dimer formation of (M,M,M)-[3 + 3]cycloalkynes in chloroform and benzene at concentrations above 2 mM. No higher aggregation is observed. The chirality of helicenes plays an important role in self-aggregation, and diastereomeric (M,P,M)-[3 + 3]cycloalkyne forms a dimer only above 15 mM. Aggregation of racemic (M,M,M)-[3 + 3]cycloalkyne or (M,P,M)-[3 + 3]cycloalkyne is much weaker than that of a single enantiomer.     

A Method for Clustering and Screening of Long-dimensional Chemical Data Based on Fingerprints and Similarity Measurements

A method for the treatment of long-dimensional chemical data arrays is presented in this work with the aim of maximising classification models. The method is based on the construction of fingerprints and the subsequent generation of a similarity matrix. The similarity calculation has been modified through a scaling process to take into account different significance shown by the variables. The method was applied to spectral measurements of wines and several aspects were studied, namely: threshold considered in the construction of fingerprints and patterns, weighting factor used for scaling, normalisation method, etc. The application of both Principal Components Analysis and Soft-Independent Modelling of Class Analogies to the similarity matrices gave better classifications of the information than those obtained using original data.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.     

Comparing ligand interactions with multiple receptors via serial docking

Standard uses of ligand-receptor docking typically focus on the association of candidate ligands with a single targeted receptor, but actual applications increasingly require comparisons across multiple receptors. This study demonstrates that comparative docking to multiple receptors can help to select homology models for virtual compound screening and to discover ligands that bind to one set of receptors but not to another, potentially similar, set. A serial docking algorithm is furthermore described that reduces the computational costs of such calculations by testing compounds against a series of receptor structures and discarding a compound as soon as it fails to satisfy specified bind/no bind criteria for each receptor. The algorithm also realizes substantial efficiencies by taking advantage of the fact that a ligand typically binds in similar conformations to similar receptors. Thus, once detailed docking has been used to fit a ligand into the first of a series of similar receptors, much less extensive calculations can be used for the remaining structures.