Flow Injection Analysis of Hydrogen Peroxide,Sulfite, Formaldehyde and Hydroxymethanesulfonic Acid in Precipitation Samples

Abstract

Hydroxymethanesulfonic acid (HMSA), the reaction product of sulfite and formaldehyde plays an important part in the aqueous phase conversion of sulfite to sulfate. HMSA is fairly stable under acidic conditions and in presence of hydrogen peroxide. Sulfite is unstable under these conditions.

A flow injection set-up was developed, which allows the determination of H₂O₂, sulfite, formaldehyde and hydroxymethanesulfonic acid.

H₂O₂ analysis by amperometric detection offers the possibility of a simple, robust field instrument. The detection limit is 5μg/l and the method is linear up to 5mg/l.

Based on the 4,4-dithiodipyridine/sulfite reaction selective and sensitive spectrophotometric detections were developed for sulfite, formaldehyde and hydroxymethanesulfonic acid. The detection limit of these compounds is 50μg/l and the method is linear up to 5mg/l.

A large fraction of S(IV) is present as HMSA in fog, dew and precipitation samples in The Netherlands.     

Influence of Ions on Aqueous Acid–Base Reactions

We study the effects of bromide salts on the rate and mechanism of the aqueous proton/deuteron‐transfer reaction between the photoacid 8‐hydroxy‐1,3,6‐pyrenetrisulfonic acid (HPTS) and the base acetate. The proton/deuteron release is triggered by exciting HPTS with 400 nm femtosecond laser pulses. Probing the electronic and vibrational resonances of the photoacid, the conjugate photobase, the hydrated proton/deuteron and the accepting base with femtosecond visible and mid‐infrared pulses monitors the proton transfer. Two reaction channels are identified: 1) direct long‐range proton transfer over hydrogen‐bonded water bridges that connect the acid and base and 2) acid dissociation to produce fully solvated protons followed by proton scavenging from solution by acetate. We observe that the addition of salt affects the long‐range reaction pathway, and reduces both the rate at which protons are released to solution by HPTS and the rate at which solvated protons are scavenged from solution by acetate. We study the dependence of these effects on the nature and concentration of the dissolved salt.     

Selectivity enhancement of anion-responsive electrodes by pulsed chronopotentiometry

A large and robust selectivity improvement of ion-selective electrodes is presented for the measurement of abundant ions. An improvement in selectivity by more than two orders of magnitude has been attained for the hydrophilic chloride ions measured in a dilute background of the lipophilic ions perchlorate and salicylate in a pulsed chronopotentiometric measurement mode. This is attributed to a robust kinetic discrimination of the dilute lipophilic ions in this measuring mode, which is not possible to achieve in classical potentiometry. Maximum tolerable concentrations of the interfering ions are found to be on the order of 30 μM before causing substantial changes in potential. As an example of practical relevance, the robust detection of chloride in 72 μM salicylate (reflecting 1:10 diluted blood) with a detection limit of 0.5 mM chloride is demonstrated. Corresponding potentiometric sensors did not give a useful chloride response under these conditions.     

Enantioselective synthesis of chiral porphyrin macrocyclic hosts and kinetic enantiorecognition of viologen guests

The construction of macromolecular hosts that are able to thread chiral guests in a stereoselective fashion is a big challenge. We herein describe the asymmetric synthesis of two enantiomeric C₂-symmetric porphyrin macrocyclic hosts that thread and bind different viologen guests. Time-resolved fluorescence studies show that these hosts display a factor 3 kinetic preference (ΔΔG^‡_on = 3 kJ mol⁻¹) for threading onto the different enantiomers of a viologen guest appended with bulky chiral 1-phenylethoxy termini. A smaller kinetic selectivity (ΔΔG^‡_on = 1 kJ mol⁻¹) is observed for viologens equipped with small chiral sec-butoxy termini. Kinetic selectivity is absent when the C₂-symmetric hosts are threaded onto chiral viologens appended with chiral tails in which the chiral moieties are located in the centers of the chains, rather than at the chain termini. The reason is that the termini of the latter guests, which engage in the initial stages of the threading process (entron effect), cannot discriminate because they are achiral, in contrast to the chiral termini of the former guests. Finally, our experiments show that the threading and de-threading rates are balanced in such a way that the observed binding constants are highly similar for all the investigated host–guest complexes, i.e. there is no thermodynamic selectivity.

Chiral guests display kinetic stereoselective threading through chiral porphyrin cages if their chirality is located at the chain ends and not in the centers, supporting the previously reported entron effect of threading.     

Long-range proton transfer in aqueous Acid-base reactions

We study the mechanism of proton transfer (PT) in the aqueous acid-base reaction between the photoacid 8-hydroxy-1,3,6-pyrenetrisulfonic acid (HPTS) and acetate by probing the vibrational resonances of HPTS, acetate, and the hydrated proton with femtosecond mid-infrared laser pulses. We find that PT takes place in a distribution of hydrogen-bound reaction complexes that differ in the number of water molecules separating the acid and the base. The number of intervening water molecules ranges from 0 to 5, which, together with a strongly distance-dependent PT rate, explains the observed highly nonexponential reaction kinetics. The kinetic isotope effect for the reaction is determined to be 1.5, indicating that tunneling does not play a significant role in the transfer of the proton. Rather, the transfer mechanism is best described in terms of the adiabatic PT picture as it has been formulated by Hynes and co-workers [Staib, A.; Borgis, D.; Hynes, J. T. J. Chem. Phys. 1995, 102, 2487. Ando, K.; Hynes, J. T. J. Phys. Chem. B 1997, 101, 10464.], where solvent fluctuations play an essential role in forming the correct hydrogen-bond configuration and solvent polarization to facilitate PT.     

Synchrotron XPS and desorption study of the NO chemistry on a stepped Pt surface

The interaction of NO with Pt(4 1 0) was studied using high-energy resolution fast XPS and temperature programmed desorption/reaction mass spectroscopy. LEED studies show that the surface in the clean state restructures, which results in the formation of some larger {1 0 0} terraces. STM measurements show, that most terraces are small, ∼1 nm. Two different binding energy (BE) components were observed in the N 1s region of the core level spectra, both assigned to molecular forms of NO. NO dissociation starts between 350 and 400 K. This is a significantly higher temperature than previous literature reports suggested. This difference is thought to be caused by the restructuring of the surface used in our experiments. The reaction of NO with H₂, NH₃ and CO was also studied. The onset of these NO reduction reactions is determined by the NO_ad dissociation temperature (between 350 and 400 K) and NO_ad dissociation is the rate limiting step for all the reactions that were studied. Reaction with H₂ yields NH₃ below 600 K, but the selectivity shifts towards N₂ at higher temperatures. We did not find any indication that reaction between NO_ad and NH_3 ad proceeds via a special NO-NH₃ intermediate. A new surface species was detected during the reaction between NO and CO, both in the N 1s and the C 1s spectrum. It is tentatively assigned to either CN or CNO. The reactivity of NO on Pt(4 1 0) is compared with the reactivity that was observed for Pt(1 0 0) and other noble metal surfaces, such as Pd and Rh.     

Chemistry and microstructure of PLD (Ti,Al)CxN1-x coatings deposited at room temperature

The aim of the present work was the improvement of titanium-aluminium nitride (TiAlN) coatings by the solid-solution hardening with carbon atoms leading to titanium-aluminium carbon-nitride (Ti,Al)C_xN_1-x coatings with varying carbon (x) and nitrogen contents. The request of low deposition temperatures necessary for the coating of heat sensitive materials like tool steels of high hardness and polymers was reached by the application of the room temperature pulsed laser deposition (PLD) technique. A Nd:YAG laser of 1064 nm wavelength operated at two different laser pulse energies was used in the ablation experiments of pure TiAl targets (50 at.% Al) in various C₂H₂-Ar gas mixtures. Different pulse energies of the laser resulted in changes of the ratio of Ti/Al atoms in the grown coatings. Furthermore, the results reveal a strong proportionality of the gas mixture to the C and N content of the coatings. In the coatings deposited at low C₂H₂ gas flows the XRD investigations showed crystalline phases with fcc TiN type lattices, whereas high acetylene flows during deposition resulted in the formation of fully amorphous coatings and carbon precipitation or cluster boundaries found in Raman investigations. PACS 81.15.Fg; 46.55.+d     

Synthesis and Characterization of the Zinc Amides: [EtZnL]2 and [ZnL2] (L = N,N‐dimethyl(N′‐trimethylsilyl)ethane‐1,2‐diaminate)

The ligand N,N‐dimethyl(N′‐trimethylsilyl)ethane‐1,2‐diamine (HL) was treated with ZnEt₂ in varying stoichiometric ratios to synthesize [EtZnL]₂ and [ZnL₂] complexes. Crystal data: [EtZnL]₂, monoclinic, P2₁/n, a = 10.0149(5) Å, b = 8.0296(3) Å, c = 16.1689(8) Å, β = 91.715(2)°. [ZnL₂], monoclinic, P2₁/n, a = 8.8457(3) Å, b = 15.4249(6) Å, c = 16.0121(7) Å, β = 92.656(1)°. The former complex is an amido nitrogen bridged dimer with distorted tetrahedral stereochemistry of the zinc atom and the latter is a distorted tetrahedral monomer based on amide/amine chelation.