Acousto-induced structural change in amorphous As2S3

The acoustic flux injection method was applied to amorphous As₂S₃. The velocity and the attenuation constant for shear wave at ～ 100MHz were measured through the observation of the Brillouin scattering of the light beam from a He-Ne laser. The optical transmission around absorption edge was found to change after the injection of acoustic fluxes. It was also found that the sound velocity decreased with increasing injection time of acoustic fluxes and the amount of the change of the sound velocity reached ～ 20% after 10⁵ injections. The changes in the optical transmission and the sound velocity tended to be erased by annealing below the glass transition temperature. These phenomena are considered to be due to structural changes caused by the injection of strong acoustic fluxes.     

Quality factor of vibration of aluminum alloy disks

The quality factor Q of a quadrupole vibration at 20 kHz has been measured for circular disks of several aluminum alloys in the temperature range 4–300 K. Q = 4 × 10⁷ is obtained with disks of the 5056 alloy below 20 K.     

Infrared-microwave double resonance of propynal by using the 3.51 μm HeXe laser

The 3.51 μm HeXe laser is magnetically tuned over a wavenumber of 0.2 cm^?1 and used for infrared absorption and double resonance spectroscopy. Eight rotation-vibration lines of propynal in the ν₂ band are assigned by the Stark effect. Eleven microwave transitions in the v₂ = 1 vibrational state are observed by the method of infrared-microwave double resonance. The rotational constants of the excited state and the band origin of the vibration ν₂ are determined from the observed spectra.     

Invar effects on some iron-base amorphous alloys

The thermal expansion and magnetic properties of Fe-B and Fe-P amorphous alloys prepared from melts have been investigated. These amorphous alloys show distinct Invar characteristics. heir magnetic properties are also very similar to those of Fe-Ni crystalline Invar alloys; that is, the high-field susceptability and forced-volume magnetostriction are remarkably large, the magnetic moment per Fe atom does not increase linearly, the Curie temperature decreases with a decrease in concentration of B or P, and their reduced their magnetization curves are much flatter than those of crystalline pure Fe.     

Short-range part of the NN interaction: Lowest-order relativistic corrections to equivalent local potentials from quark exchange kernels

The full Breit hamiltonian, including the Darwin term and relativistic kinetic-energy correction, has been used to construct resonating group kernels in analytic form for the six-quark NN system. The nonlocal kernels have been converted to equivalent local potentials using the WKB approximation based on their Wigner transforms. The equivalent local potentials have been confirmed to be rather insensitive to a choice of parameters and to be fairly accurate by comparing with the phase shifts and the wave functions obtained with the RGM equation. The results indicate the importance of the Darwin term. The term leads to a large reduction of the strong repulsive cores given by the color magnetic interaction and makes the resulting potentials less repulsive than those which neglect this term. The relative importance of the various components in the Breit interaction and of the quark-gluon exchange diagrams is made clear.     

Multiwalled carbon nanotubes mass-produced by dc arc discharge in He–H2 gas mixture

Uniform cathode deposits (longer than 15 mm), containing multiwalled carbon nanotubes (MWNTs) inside, were produced by dc arc discharge evaporation with a computer-controlled feeder of a pure-carbon electrode without a metal catalyst in a He–H₂ gas mixture. The purification of MWNTs was carried out to remove amorphous carbon and carbon nanoparticles. High-resolution transmission electron microscopy observations and Raman scattering studies show that the MWNTs possess a high crystallinity and a mean outermost diameter of ∼ ∼10 nm. It has been confirmed that the current density in the electron field emission from a purified MWNT mat can reach 77.92 mA/cm², indicating that the purified MWNTs are a promising candidate electron source in a super high-luminance light-source tube or a miniature X-ray source.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Synthesis of Al–Cr decagonal quasicrystal nanoparticles and their temperature of phase transformation to stable crystal phase

The synthesis of Al–Cr single quasicrystal (QC) nanoparticles of the decagonal phase was achieved by introducing an advanced gas flow evaporation method. By obtaining successive electron diffraction patterns for single-QC nanoparticles, the phase transformation temperature of a single-QC nanoparticle was determined to be 700 °C. It was also determined that part of the QC nanoparticle decomposed into hex-Al₈Cr₅ and Al during the phase transformation. Since the grain growth did not occur during the phase transformation in the present experiment, the inherent phase transformation temperature could be measured.     

Simultaneous observation of CO isotopomer absorption by broadband difference-frequency generation using a direct-bonded quasi-phase-matched LiNbO3 waveguide

Rovibration absorption lines both of 12CO and 13CO are observed simultaneously with the output of a 2 microm broadband difference frequency generated in a direct-bonded quasi-phase-matched LiNbO3 waveguide, which is a 50 mm device with a single quasi-phase-matching period that is operated at a constant temperature. The wavelength conversion efficiency and the difference-frequency generation bandwidth reach 100%/W and 100 nm, respectively. The idler output bandwidth in the 2 microm region is obtained by group-velocity matching or phase-mismatch minimization when a 0.94 microm pump laser diode and a 1.55 microm tunable signal source are used.