Novel real-time sensors to quantitatively assess in vivo inositol 1,4,5-trisphosphate production in intact cells

Real-time observation of messenger molecules in individual intact cells is essential for physiological studies of signaling mechanisms. We have developed a novel inositol 1,4,5-trisphosphate (IP(3)) sensor based on the pleckstrin homology (PH) domain from phospholipase C (PLC) delta. The environmentally sensitive fluorophore 6-bromoacetyl-2-dimethyl-aminonaphtalene was conjugated to the genetically introduced cysteine at the mouth of the IP(3) binding pocket for enhanced IP(3) selectivity and for rapid and direct visualization of intracellular IP(3) > or = 0.5 microM as fluorescence emission decreased. The probe, tagged with arginine-rich sequences for efficient translocation into various cell types, revealed a major contribution of Ca2+ influx to PLC-mediated IP(3) production that boosts Ca2+ release from endoplasmic reticulum. Thus, our IP(3) probe was extremely effective to quantitatively assess real-time physiological IP(3) production via those pathways formed only in the intact cellular configuration.     

Frequency response of the glucose sensor based on immobilized glucose oxidase membrane

Frequency response of the glucose sensor based on the immobilized glucose oxidase membrane was investigated experimentally by giving the sinusoidal change of glucose concentration to the glucose sensor and observing its output signal. Observed values of gains and phase lags of the frequency response of the glucose sensor followed the frequency response model of the first-order with dead time; The time constant and also the dead time were estimated and found to decrease as the amount of enzyme immobilized in the membrane increased and the thickness of the membrane decreased.

     

Spectrophotometric determination of boron with an azomethine H derivative

Summary An azomethine H derivative, 1-(2,4-dihydroxybenzylidene-amino)-8-hydroxynaphthalene-3,6-disulphonic acid (azomethine HR) was examined and proposed as a spectrophotometric reagent for boron, as compared with azomethine H. Azomethine HR reacts with boron in aqueous solution (pH 7.5) to form a yellow complex having an absorption maximum at 425 nm. The sensitivity is 3.5-fold greater than with azomethine H when the same reagent concentration is applied. Basic conditions for the determination of boron have been worked out. The method is applicable to sea and hot spring waters. The standard deviation is ±2.1%.

---

Spektralphotometrische Borbestimmung mit einem Azomethin H-Derivat

     

Asymmetric synthesis of highly substituted beta-nitro alcohols and enantiomerically enriched 4,4,5-trisubstituted oxazolidinones

It is demonstrated that alpha,alpha-disubstituted-alpha-nitroketones are reduced to the corresponding trisubstituted nitro alcohols in good to excellent yield and enantiomeric excess by borane-dimethyl sulfide in the presence of a chiral oxazaborolidine catalyst. Reduction of the nitro alcohols to the corresponding amino alcohols and their subsequent conversion to enantiomerically enriched 4,4,5-trisubstituted oxazoldinones is also reported.     

Effect of pressure on the thermotropic phase behavior of surfactant assemblies in water

The temperature (T)—pressure (P) phase diagrams of aqueous solutions of a homologous series of cationic surfactants, tetradecyl- (C14TAB), hexadecyl- (C16TAB), and octadecyltrimethylammonium bromide (C18TAB), have been determined by observing the sudden change of the transmittance accompanying the phase transition under high pressure up to 160 MPa. Regarding three kinds of phase transitions which have been previously assigned by the differential scanning calorimetry (DSC) (S. Kaneshina and M. Yamanaka, J. Colloid Interface Sci.131, 493, 1989), all the transition temperatures were linearly elevated by applying pressure. The volume changes associated with the transitions were estimated from the Clapeyron—Clausius equation by using the values of the T—P slopes on the phase diagrams and of the transition entropies taken from the DSC study. A chemical potential vs pressure profile, of which slope reflects the partial molar volume, among the states of surfactant assemblies, i.e., micelle, gel, and coagel, was drawn schematically on the basis of the transition volumes. The phase boundary between the coagel phase and the micellar solution should be the critical solution line of the surfactant, representing the pressure dependence on the Krafft temperature. In the C18TAB-water system, the phase boundary line between the metastable gel and the supercooled micelle had a break point at 45 MPa, suggesting the existence of a new pressure-induced mesophase above 45 MPa. The metastable gel phase of C14TAB disappeared in the pressure range up to 160 MPa.     

Effect of oral pretreatment with antibiotics on the hydrolysis of salicylic acid-tyrosine and salicylic acid-methionine prodrugs in rabbit intestinal microorganisms.

We examined the hydrolysis mechanism of salicylic acid-tyrosine (salicyl-tyrosine) and salicylic acid-methionine conjugate (salicyl-methionine) in rabbits by exploring their behavior following intraduodenal and intracecal administration (72 and 36 mumol/kg, respectively: salicylic acid equivalent). A large amount of salicyl-methionine was absorbed following intraduodenal administration of salicyl-methionine, without being metabolized to salicylic acid in the small intestinal mucosa. On the contrary, salicylic acid was detected in the blood following intraduodenal administration of salicyl-tyrosine, suggesting that salicyl-tyrosine was metabolized in the small intestinal mucosa. After oral pretreatment of rabbits with kanamycin sulfate (6 x 400 mg) or tinidazole (6 x 160 mg), the hydrolysis of salicyl-tyrosine and salicyl-methionine following intracecal administration was inhibited significantly, indicating that the intestinal microorganisms were responsible for the biotransformation of these prodrugs. Furthermore, in rabbits orally pretreated with both kanamycin sulfate and tinidazole, a significant inhibition of salicylic acid formation from salicyl-tyrosine and salicyl-methionine following intracecal administration was observed.     

Efficient synthesis of tertiary amines from secondary amines

Reliable N-alkylations of secondary amines have been developed. By using DIAD and TPP (or PS-TPP) a variety of secondary amines can be converted to the corresponding tertiary amines in good to excellent yields with diverse alkylhalides; no formation of quaternary amine salts are observed. These protocols are amenable to combinatorial chemistry libraries, and are also useful for the syntheses of secondary amines by an acid lysis of the cleavable tertiary amino resins.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

Local structure and chemical durability of FeOOH-fixed sodium silicate glass prepared from water glass

A 12M HCl solution of iron oxyhydroxide (a-FeOOH: goethite) was mixed with water glass (18Na₂O^.36SiO₂ ^.46H₂O) at room temperature. The mixture (sol) changed into a dry gel when dried at 25 °C for 120 hours in air. Glass-ceramic and glass samples were prepared when the dry gel was heated for 1-3 hours in an electric furnace at 800 and 900 °C, respectively. The ⁵⁷Fe Mössbauer spectrum of the dry gel is composed of a magnetic hyperfine structure owing to the formation of g-FeOOH (lepidocrocite). By contrast, the ⁵⁷Fe Mössbauer spectrum of glass-ceramic and glasses is composed of paramagnetic Fe(III) with distorted tetrahedral symmetry. This proves that Fe(III) atoms occupy network-forming Si(IV) sites in the FeOOH-fixed sodium silicate glass. A leaching test of the silicate glass in the acid rain simulant composed of HNO₃ (pH 3.5) and H₂SO₄ (pH 3.5) revealed high chemical durability, indicating that Fe(III) is firmly fixed in the glass matrix.     

Surface treatment of silicon carbide using TiO2(IV) photocatalyst

Silicon carbide (SiC) and diamond were decomposed to CO(2)(g) by the photocatalysis with TiO(2) at room temperature, although the decomposition rate of diamond was very slow. According to the XPS spectra of Si2p on the SiC surface, SiO(2) was simultaneously formed on the surface by the TiO(2) photocatalysis. The thickness of the SiO(2) formed on the SiC surface during the photocatalytic oxidation for 1 h was estimated to be about 40 A from the depth profile of the XPS spectra using Ar etching. The SiC surface was oxidized by the TiO(2) photocatalysis even under the condition without a direct contact with the TiO(2). This indicates that the photocatalytic oxidation of the SiC occurs due to active oxygen species photogenerated on the TiO(2) surface, but not by hole produced in the valence band of the TiO(2). Moreover, a remote surface treatment system using the quartz beads coated with TiO(2) was developed for the SiC surface oxidation. Consequently, the TiO(2) photocatalysis will be very useful for the surface treatment of SiC such as photopatterning without defects and damage to the substrate because the photocatalytic reaction is carried out under mild conditions.