Degradation behavior and kinetic study of ABS polymer

The degradation kinetics of the ABS terpolymer (acrylonitrile-butadiene-styrene) was investigated by means of thermogravimetric analysis. The samples were heated from 30 to 900°C in nitrogen atmosphere applying three different heating rates: 5, 10 and 20°C min⁻¹. The Vyazovkin model-free kinetic method was used to calculate the activation energy (E) of the degradation process as a function of conversion and temperature. Between 20 and 80% of conversion, E was calculated and the figures were: for ABS GP, E is 204.5±11.5 kJ mol⁻¹ (medium value); for ABS HI, E is 239.0±9.8 kJ mol⁻¹; for ABS HH, E is 242.4±5.4 kJ mol⁻¹.     

Rapid tool for distinction of wines based on the global volatile signature

A new methodology capable of performing the simultaneous analysis of the main surfactants--linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES), alkyl sulfates (AS), nonylphenol polyethoxylates (NPEOs) and alcohol polyethoxylates (AEOs)--and their carboxylated metabolites--sulfophenyl carboxylic acids (SPCs) and alkylphenol ethoxycarboxylates (APECs)--in environmental samples has been developed for the first time. Extraction is carried out by solid-phase extraction (SPE) and pressurized liquid extraction (PLE) from water and sediment, respectively. Identification and quantification of the target compounds is performed using a liquid chromatography-mass spectrometry (LC-MS) system equipped with an electrospray interface (ESI) operating in mixed-mode. Optimization of parameters such as pH, ionic strength, temperature and solvents has been carried out in order to obtain recoveries in the range from 70 to 107% for most homologs, while the limits of detection are 0.05-0.5 ng mL(-1) in water and 1-10 ng g(-1) in sediment. The proposed methodology has been applied for the simultaneous determination of all the target compounds in samples taken from aquatic ecosystems in the SW of Spain. Values for LAS, AS, AES, NPEOs and AEOs are up to 38.7, 3.0, 2.9, 5.0 and 1.2 microg L(-1) in waters, and in the ranges of 1.73-12.80, 0.11-0.24, 0.02-0.59, 1.94-2.70 and 0.64-3.64 mg kg(-1) in sediments, respectively. The highest concentrations of metabolites found in water are 149.6 microg L(-1) of SPCs and 3.9 microg L(-1) of APECs.     

Low-resolution 1H spin-spin relaxation of n-decane/water emulsions stabilized by beta-casein

A low-resolution ¹H NMR relaxometry study on the dynamics of an n-decane/water emulsion stabilized by β-casein is presented. Spin–spin (transverse) relaxation time constants (T₂) were used to assess relative mobilities of emulsion components, by a selective deuteration procedure. Data analysis allowed the emulsion investigated to be described by a heterogeneous collection of dynamically distinct populations. A major population of n-decane molecules presented an average mobility that very nearly approached that of pure solvent, which is compatible with its occurrence in the emulsion continuous microphase. β-Casein molecules displayed a prevalent population with significantly decreased mobility as compared to the free protein in solution, which is in accordance with the protein location at the oil/water interface. Also, a major H₂O population with significantly lower average T₂ as compared to the pure liquid was detected and has been assigned to interfacial water.     

U(SMes*)n, (n = 3, 4) and Ln(SMes*)3 (Ln = La, Ce, Pr, Nd): lanthanide(III)/actinide(III) differentiation in agostic interactions and an unprecedented eta3 ligation mode of the arylthiolate ligand, from X-ray diffraction and DFT analysis

Reaction of U(NEt(2))(4) with HS-2,4,6-(t)Bu(3)C(6)H(2) (HSMes) gave U(SMes)(3)(NEt(2))(py) (1), whereas similar treatment of U[N(SiMe(3))SiMe(2)CH(2)][N(SiMe(3))(2)](2) afforded U(SMes)[N(SiMe(3))(2)](3) (2) and U(SMes)(3)[N(SiMe(3))(2)]. The first neutral homoleptic uranium(IV) thiolate to have been crystallographically characterized, U(SMes)(4) (4), was isolated from the reaction of U(BH(4))(4) and KSMes. The first homoleptic thiolate complex of uranium(III), U(SMes)(3) (5), was synthesized by protonolysis of U[N(SiMe(3))(2)](3) with HSMes in cyclohexane. The crystal structure of 5 exhibits the novel eta(3) ligation mode for the arylthiolate ligand. Comparison of the crystal structure of 5 with those of the isomorphous lanthanide congeners Ln(SMes)(3) (Ln = La, Ce, Pr, and Nd) indicates that the U-S, U-C(ipso)(), and U-C(ortho)() bond lengths are shorter than the corresponding ones in the 4f-element analogues, when taking into account the variation in the ionic radii of the metals. The distance between the uranium and the carbon atoms involved in the U...H-C epsilon agostic interaction of each thiolate ligand is shorter, by approximately 0.05 A, than that expected from a purely ionic bonding model. The lanthanide(III)/actinide(III) differentiation was analyzed by density functional theory (DFT). The nature of the M-S bond is shown to be ionic strongly polarized at the sulfur for M = U and iono-covalent (i.e. strongly ionic with low orbital interaction), for M = Ln. The strength of the U...H-C epsilon agostic interaction is proposed to be controlled by the maximization of the interaction between U(+) and S(-) under steric constraints. The eta(3) ligation mode of the arylthiolate ligand is also obtained from DFT.     

Determination of chromium by GFAAS in slurries of fish feces to estimate the apparent digestibility of nutrients in feed used in pisciculture

This paper presents a simple, fast and sensitive method to determine chromic oxide (used as a biological marker of fish feed) in samples of fish feces by GFAAS through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The standard samples of feces and of fish feed containing 0.10-1.00 mg kg⁻¹ of Cr₂O₃ were pre-frozen for 1 min in liquid nitrogen and then ground a cryogenic mill for 2 min, which reduced the samples’ grain size to less than 60 μm. The standard slurries were prepared by mixing 20 mg of standard samples of fish feed or feces with 1 mL of a solution containing 0.05% (v/v) of Triton X-100 and 0.50% (v/v) of suprapure HNO₃ directly in the spectrometer's automatic sampling glass. The final concentrations of Cr₂O₃ present in the standard slurries were 2, 4, 8, 16 and 20 μg L⁻¹. After sonicating the mixture for 20 s, 10 μL of standard slurries were injected into the graphite tube, whose internal wall was lined with a metallic palladium film that acted as a permanent chemical modifier. The limits of detection (LOD) and quantification (LOQ) calculated for 20 readings of the blank of the standard slurries (2%, m/v of feces or feed devoid of minerals) were 0.81 and 2.70 μg L⁻¹ of Cr₂O₃ for the standard feces slurries, 0.84 and 2.83 μg L⁻¹ of Cr₂O₃ for the standard feed slurries. The proposed method was applied in studies of nutrient digestibility of different fish feeds and its results proved compatible with the results obtained from samples pre-mineralized by acid digestion.     

Novel copolymers of styrene. 3. Some ring-substituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, ring-substituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃COO, 3-CH₃CO, 4-CH₃CONH, 2-CN, 3-CN, 4-CN, 4-(CH₃)₂N, 4-(C₂H₅)₂N) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (2.7–8.6% wt.), which then decomposed in the 500–800°C range.     

Novel copolymers of styrene. 5. Alkyl and alkoxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, alkyl and alkoxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is 2,3-dimethyl, 2,5-dimethyl, 2,6-dimethyl, 3,4-dimethyl, 2,3-dimethoxy, 2,4-dimethoxy, 2,5-dimethoxy, 2,6-dimethoxy 3,4-dimethoxy, 3,5-dimethoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (0.6–5.0% wt.), which then decomposed in the 500–800°C range.     

Toward an ion–photon quantum interface in an optical cavity

We demonstrate several building blocks for an ion–photon interface based on a trapped ⁴⁰Ca⁺ ion in an optical cavity. We identify a favorable experimental configuration and measure system parameters, including relative motion of the trapped ion and the resonator mode. A complete spectrum of cavity-assisted Raman transitions between the 4²S_1/2 and 3²D_5/2 manifolds is obtained. On two of these transitions, we generate orthogonally polarized cavity photons, and we demonstrate coherent manipulation of the corresponding pair of atomic states. Possible implementations of atom-photon entanglement and state mapping within the ion-cavity system are discussed.