Syntheses,structure, and reactivity of acyclic enetriyne and enetetrayne derivatives

Sonogashira coupling of buta-1,3-diynylbenzene with ((2-iodophenyl)ethynyl)trimethylsilane and 1,2-diiodobenzene led to the novel enetriyne, 1-ethynyl-2-(phenylbuta-1,3-diynyl)benzene, and enetetrayne, 1,2-bis(phenylbuta-1,3-diynyl)benzene, respectively. Solid state structural and thermal analyses are also described. In solution, 1-ethynyl-2-(phenylbuta-1,3-diynyl)benzene was found to undergo thermal Bergman cyclization to afford 2-(phenylethynyl)naphthalene.     

The cationization of synthetic polymers in matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry: Investigations of the salt‐to‐analyte ratio

Matrix‐assisted laser desorption/ionization (MALDI) is a soft ionization technique that when used to analyze synthetic polymer analytes often requires the addition of a metal cationization agent (herein termed the “salt”). The choice of both the matrix and the cationization agent needs to be taken into account when considering the polymer under study; different polymers have shown different affinities toward different cationization agents, and their selectivity can change as the matrix changes. Salt‐to‐analyte ratio (S/A) plots are used in this work to investigate the effect of the quantity of cationization agent employed in the analysis of a poly (methylmethacrylate) (PMMA) analyte with different MALDI matrices. The point at which analyte signal stops increasing with the added cationization agent is termed the “cation saturation point,” and it was found to occur around a S/A of 1. When the analyte signal after this point remains constant, it is termed an “ideal case.” The “non‐ideal case” occurs when the analyte signal decreases after the cation saturation point. The amount of matrix present (measured as the matrix‐to‐analyte molar ratio, M/A) and the use of different counterions for the salt are also found to affect the intensity of the analyte signal. In non‐ideal cases, changes in the counterion or an increase in the M/A are found to increase the analyte signal, often converting an initially observed non‐ideal case into an ideal case. Several experiments attempting to uncover the reason for observation of the non‐ideal S/A behavior are also described.     

Low‐Fouling Electrosprayed Hemoglobin Nanoparticles with Antioxidant Protection as Promising Oxygen Carriers

Despite all the attempts to create advanced hemoglobin (Hb)‐based oxygen carriers (HBOCs) employing an encapsulation platform, major challenges including attaining a high Hb loading and long circulation times still need to be overcome. Herein, the fabrication, for the first time, of nanoparticles fully made of Hb (Hb‐NPs) employing the electrospray technique is reported. The Hb‐NPs are then coated by antioxidant and self‐polymerized poly(dopamine) (PDA) to minimize the conversion of Hb into nonfunctional methemoglobin (metHb). The PDA shell is further functionalized with poly(ethylene glycol) (PEG) to achieve stealth properties. The results demonstrate that the as‐prepared Hb‐NPs are hemo‐ and biocompatible while offering antioxidant protection and decreasing the formation of metHb. Additionally, decoration with PEG results in decreased protein adsorption onto the Hb‐NPs surface, suggesting a prolonged retention time within the body. Finally, the Hb‐NPs also preserve the reversible oxygen‐binding and releasing properties of Hb. All in all, within this study, a novel HBOCs with high Hb content is fabricated and its potential as an artificial blood substitute is evaluated.     

Quantification of curium isotopes in environmental samples: drawbacks,speciation and specific tracer

Journal of Radioanalytical and Nuclear Chemistry - In this study, drawbacks of the use of 243Am as a tracer in order to quantify curium isotopes during a complex chemical procedure were...     

Electrostatic discharge sensitivity and electrical conductivity of composite energetic materials

Composite energetic material response to electrical stimuli was investigated and a correlation between electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum (Al) with copper oxide (CuO) was the only mixture to ignite by electrostatic discharge. Under the loose powder conditions of these experiments, the Al–CuO minimum ignition energy (MIE) is 25 mJ and exhibited an electrical conductivity two orders of magnitude higher than the next composite. This study showed a similar trend in MIE for ignition triggered by a discharged spark compared with a thermal hot wire source.     

Stark Hole-Burning Spectroscopy of Cresylviolet Perchlorate in Amorphous Hosts

Stark hole-burning spectroscopy is used to investigate the effective dipole moment change of cresylviolet perchlorate (CVP) in various glass and polymer hosts such as ethanol:methanol (EM), polyvinyl alcohol (PVA), poly (2-hydroxyethyl) methacrylate (PHEMA), polyvinylbutyral (PVB), and formamide. The strong correlation between effective dipole moment change of the guest molecule and the holeburning efficiencies of the host matrices illustrates the sensitivity of the dipole moment change as a direct measure of guest-host interactions. Hole-burning is found to be more efficient as the dipole induced reaction field increases. This relationship is discussed in terms of the unusual hole-burning mechanism suggested for this molecule. The effective dipole moment change of cresylviolet perchlorate ranges from 0.14 to 0.59 Debye.     

Plate-based diversity subset screening: an efficient paradigm for high throughput screening of a large screening file

The screening files of many large companies, including Pfizer, have grown considerably due to internal chemistry efforts, company mergers and acquisitions, external contracted synthesis, or compound purchase schemes. In order to screen the targets of interest in a cost-effective fashion, we devised an easy-to-assemble, plate-based diversity subset (PBDS) that represents almost the entire computed chemical space of the screening file whilst comprising only a fraction of the plates in the collection. In order to create this file, we developed new design principles for the quality assessment of screening plates: the Rule of 40 (Ro40) and a plate selection process that insured excellent coverage of both library chemistry and legacy chemistry space. This paper describes the rationale, design, construction, and performance of the PBDS, that has evolved into the standard paradigm for singleton (one compound per well) high-throughput screening in Pfizer since its introduction in 2006.     

Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure

Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and E180, contained birch bark extracts obtained after extraction at 80 and 180 °C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 °C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 °C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 °C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 °C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (−)-catechin, (+)-epicatechin, and (−)-epicatechin.