Infrared spectra of aluminum hydrides in solid hydrogen: Al2H4 and Al2H6

The reaction of laser-ablated Al atoms and normal-H(2) during co-deposition at 3.5 K produces AlH, AlH(2), and AlH(3) based on infrared spectra and the results of isotopic substitution (D(2), H(2) + D(2) mixtures, HD). Four new bands are assigned to Al(2)H(4) from annealing, photochemistry, and agreement with frequencies calculated using density functional theory. Ultraviolet photolysis markedly increases the yield of AlH(3) and seven new absorptions for Al(2)H(6) in the infrared spectrum of the solid hydrogen sample. These frequencies include terminal Al-H(2) and bridge Al-H-Al stretching and AlH(2) bending modes, which are accurately predicted by quantum chemical calculations for dibridged Al(2)H(6), a molecule isostructural with diborane. Annealing these samples to remove the H(2) matrix decreases the sharp AlH(3) and Al(2)H(6) absorptions and forms broad 1720 +/- 20 and 720 +/- 20 cm(-1) bands, which are due to solid (AlH(3))(n). Complementary experiments with thermal Al atoms and para-H(2) at 2.4 K give similar spectra and most product frequencies within 2 cm(-1). Although many volatile binary boron hydride compounds are known, binary aluminum hydride chemistry is limited to the polymeric (AlH(3))( solid. Our experimental characterization of the dibridged Al(2)H(6) molecule provides an important link between the chemistries of boron and aluminum.     

The influence of activated carbon on the thermal decomposition of sodium ethyl xanthate

The thermal decomposition of SEX in a nitrogen atmosphere was studied by coupled thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS). The TG curve exhibited two discrete mass losses of 45.8% and 17.8% respectively, at 200 and 257–364°C. The evolved gases identified as a result of the first mass loss were carbonyl sulfide (COS), ethanol (C₂H₅OH), ethanethiol (C₂H₅SH), carbon disulfide (CS₂), diethyl sulfide ((C₂H₅)₂S), diethyl carbonate ((C₂H₅O)₂CO), diethyl disulfide ((C₂H₅)₂S₂), and carbonothioic acid, O, S, diethyl ester ((C₂H₅S)(C₂H₅O)CO). The gases identified as a result of the second mass loss were carbonyl sulfide, ethanethiol, and carbon disulfide. Hydrogen sulfide was detected in both mass losses by py-GC-MS, but not detected by FTIR. The solid residue was sodium hydrogen sulfide (NaSH).SEX was adsorbed onto activated carbon, and heated in nitrogen. Two discrete mass losses were still observed, but in the temperature ranges 100–186°C (7.8%) and 186–279°C (11.8%). Carbonyl sulfide and carbon disulfide were now the dominant gases evolved in each of the mass losses, and the other gaseous products were relatively minor. It was demonstrated that water adsorbed on the carbon hydrolysed the xanthate to cause the first mass loss, and any unhydrolysed material decomposed to give the second mass loss.Mr. N. G. Fisher would like to thank the A. J. Parker CRC for Hydrometallurgy for the provision of a PhD scholarship.     

Suicide inactivation of dioldehydratase by glycolaldehyde and chloroacetaldehyde: an examination of the reaction mechanism

High-level ab initio calculations have been used to study the mechanism for the inactivation of diol dehydratase (DDH) by glycolaldehyde or 2-chloroacetaldehyde. As in the case of the catalytic substrates of DDH, e.g., ethane-1,2-diol, the 5'-deoxyadenosyl radical (Ado*) is able to abstract a hydrogen atom from both substrate analogues in the initial step on the reaction pathway, as evidenced by comparable energy barriers. However, in subsequent step(s), each substrate analogue produces the highly stable glycolaldehyde radical. The barrier for hydrogen atom reabstraction by the glycolaldehyde radical is calculated to be too high ( approximately 110 kJ mol-1) to allow Ado* to be regenerated and recombine with the cob(II)alamin radical, the latter therefore remaining tightly bound to DDH. As a consequence, the catalytic pathway is disrupted, and DDH becomes an impotent enzyme. Interconversion of equivalent structures of the glycolaldehyde radical via the symmetrical cis-ethanesemidione radical is calculated to require 38 kJ mol-1. EPR indications of a symmetrical cis-ethanesemidione structure are likely to be the result of formation of an equilibrium mixture of glycolaldehyde radical structures, this equilibration being facilitated by partial deprotonation of the glycolaldehyde radical by the carboxylate of an amino acid residue within the active site of DDH.     

Shell-cross-linked vesicles synthesized from block copolymers of Poly(D,L-lactide) and Poly(N-isopropyl acrylamide) as thermoresponsive nanocontainers

A polylactide (D,L-PLA) macroRAFT agent was prepared by utilizing a hydroxyl-functional trithiocarbonate as a coinitiator for the ring-opening polymerization. The length of the resultant polymer was controlled by the concentration of the coinitiator leading to the formation of two PLA polymers with M(n) = 12500 g mol(-)(1) (PDI = 1.46) and M(n) = 20500 g mol(-)(1) (PDI = 1.38) each with omega-trithiocarbonate functionality. Chain extension of PLA via the RAFT (free radical) polymerization of N-isopropyl acrylamide (NIPAAm) resulted in the formation of amphiphilic block copolymers with the PNIPAAm block increasing in size with conversion. TEM measurements of the aggregates obtained by self-organization of the block copolymers in aqueous solutions indicated the formation of vesicles. The sizes of these aggregates were influenced by the ratio of both blocks and the molecular weight of each block. The lower critical solution temperature (LCST) of the block copolymer was largely unaffected by the size of each block. UV turbidity measurements indicated a higher LCST for the block copolymers than for the corresponding PNIPAAm homopolymers. Stabilization of the vesicles was attained by a cross-linking chain extension of the PNIPAAm block using hexamethylene diacrylate. As the trithiocarbonate group was located between the PLA and PNIPAAm blocks, the chain extension resulted in a cross-linked layer between the core and corona of the vesicles.     

Targeted lipidomics using electron capture atmospheric pressure chemical ionization mass spectrometry

There is an increasing need to be able to conduct quantitative lipidomics analyses as a complement to proteomics studies. The highest specificity for proteomics analysis can be obtained using methodology based on electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) coupled with liquid chromatography/tandem mass spectrometry (LC/MS/MS). For lipidomics analysis it is often necessary to be able to separate enantiomers and regioisomers. This can be very challenging when using methodology based on conventional reversed-phase chromatography. Normal-phase chromatography using chiral columns can provide dramatic improvements in the resolution of enantiomers and regioisomers. However, conventional ESI- and APCI-MS/MS has limited sensitivity, which makes it difficult to conduct studies in cell culture systems where only trace amounts of non-esterified bioactive lipids are present. The use of electron capture APCI-MS/MS overcomes this problem. Enantiomers and regioisomers of diverse bioactive lipids can be quantified using stable isotope dilution methodology coupled with normal-phase chiral chromatography and electron capture APCI-MS/MS. This methodology has allowed a lipidomics profile from rat epithelial cells maintained in culture to be delineated and allowed the effect of a non-selective lipoxygenase inhibitor to be assessed.     

Negative- and positive-ion chemical ionization mass spectra of aromatic amines: Surface-assisted reactions involving oxygen

The O₂–N₂ and O₂–Ar negative-ion chemical ionization mass spectra of aromatic amines show a series of unusual ions dominated by an addition appearing at [M + 14]^?˙. Other ions are observed at [M – 12]^?˙, [M + 5]^?˙, [M + 12]^?˙, [M + 28]^?˙ and [M + 30]^?˙. Ion formation was studied using a quadrupole instrument equipped with a conventional chemical ionization source and a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. These studies, which included the examination of ion chromatograms, measurement of positive-ion chemical ionization mass spectra, variation of ion source temperature and pressure and experiments with ¹⁸O₂, indicate that the [M + 14]^?˙ ion is formed by the electron-capture ionization of analytes altered by surfaceassisted reactions involving oxygen. This conversion is also observed under low-pressure conditions following source pretreatment with O₂. Experiments with [¹⁵N]aniline, [2,3,4,5,6-²H₅] aniline and [¹³C₆]aniline show that the [M + 14]^?˙ ion corresponds to [M + O ? 2H]^?˙, resulting from conversion of the amino group to a nitroso group. Additional ions in the spectra of aromatic amines also result from surface-assisted oxidation reactions, including oxidation of the amino group to a nitro group, oxidation and cleavage of the aromatic ring and, at higher analyte concentrations, intermolecular oxidation reactions.     

The lanthanideβ″ aluminas

The entire sodium ion content of sodium alumina (Na_1.67Mg_0.67Al_10.33O₁₇) can be replaced with a variety of lanthanide ions by simple diffusion reactions at moderate temperatures (500–700°C). Lanthanide alumina crystals are hard, clear, chemically stable, and have well-defined crystal structures. The fluorescence spectrum of Nd³⁺ in alumina is similar to that in YAG. The lifetime of the⁴ F _3/2 state of Nd³⁺ in completely-exchanged alumina (350s at 10²¹ Nd³⁺ cm^–3) is about 45% longer than in YAG (240s at 10²⁰Nd³⁺ cm^–3). The lanthanide aluminas may be of considerable interest as new phosphor and laser host materials.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Should dithiophosphinate esters function as RAFT agents?

[graph: see text] High-level ab initio calculations indicate that *CH3 addition to the sulfur center of S=P(Z)(Z')SCH3 (Z,Z' = CH3, CN, OCH3, Ph) is considerably less exothermic than addition to the corresponding RAFT agents, S=C(Z)SCH3. This suggests that dithiophosphinate esters may have only limited use in controlling free-radical polymerization, but should make excellent radical chain carriers in organic synthesis. The results cast doubt on the notion that phosphoranyl radicals are more "intrinsically" stabilized than carbon-centered radicals.     

Measuring the metabolome: current analytical technologies

The post-genomics era has brought with it ever increasing demands to observe and characterise variation within biological systems. This variation has been studied at the genomic (gene function), proteomic (protein regulation) and the metabolomic (small molecular weight metabolite) levels. Whilst genomics and proteomics are generally studied using microarrays (genomics) and 2D-gels or mass spectrometry (proteomics), the technique of choice is less obvious in the area of metabolomics. Much work has been published employing mass spectrometry, NMR spectroscopy and vibrational spectroscopic techniques, amongst others, for the study of variations within the metabolome in many animal, plant and microbial systems. This review discusses the advantages and disadvantages of each technique, putting the current status of the field of metabolomics in context, and providing examples of applications for each technique employed.