An evaluation of the performance of porous polymer monolith assisted electrospray

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.     

The synthesis of isoindolin-3-ones,Phthalazin-4(3H)-ones and related systems

The reaction between methyl 2-cyanobenzoate and its pyridine analogues gave isoindolin-3-ones, phthalazin-4(3H)-ones and their corresponding aza analogues. Some reactions of 1-benzylaminoiminoisoindolin-3-one 5b were investigated.     

Development of an in situ fiber optic Raman system to monitor hydrothermal vents

The development of a field portable fiber optic Raman system modified from commercially available components that can operate remotely on battery power and withstand the corrosive environment of the hydrothermal vents is discussed. The Raman system is designed for continuous monitoring in the deep-sea environment. A 785 nm diode laser was used in conjunction with a sapphire ball fiber optic Raman probe, single board computer, and a CCD detector. Using the system at ambient conditions the detection limits of SO(4)(2-), CO(3)(2-) and NO(3)(-) were determined to be approximately 0.11, 0.36 and 0.12 g l(-1) respectively. Mimicking the cold conditions of the sea floor by placing the equipment in a refrigerator yielded slightly worse detection limits of approximately 0.16 g l(-1) for SO(4)(-2) and 0.20 g l(-1) for NO(3)(-). Addition of minerals commonly found in vent fluid plumes also decreased the detection limits to approximately 0.33 and 0.34 g l(-1) respectively for SO(4)(-2) and NO(3)(-).     

Nucleophilic displacements in pyridine rings

The reactions of halopyridines containing an electron withdrawing group (-CN, -CO₂R,-COM_e, -NO₂) with sulphur nucleophiles is reported.     

Multiply doped nanostructured silicate sol-gel thin films: spatial segregation of dopants, energy transfer, and distance measurements

Physical and chemical strategies that place designed molecules in spatially separated regions of surfactant-templated mesostructured silicate thin films are used to prepare films containing rhodamine 6G (R6G), lanthanide complexes, and both simultaneously. Fluorescence and photoexcitation spectra of R6G in amorphous and structured thin films show that it is located inside the surfactant micelles of structured thin films. A silylated ligand that binds lanthanides condenses to form part of the silica framework and causes the lanthanide to localize in the silica. Luminescence and photoexcitation spectra show that energy transfer from the metal complex to R6G occurs in the films. R6G quenches Tb emission in a concentration-dependent manner. Energy transfer efficiency is calculated using the Tb luminescence lifetime, and this quantity is used to calculate the distance between Tb and R6G with the aid of Forster theory.     

Selenium redox cycling in the protective effects of organoselenides against oxidant-induced DNA damage

The biological role of selenium is a subject of intense current interest, and the antioxidant activity of selenoenzymes is now known to be dependent upon redox cycling of selenium within their active sites. Exogenously supplied or metabolically generated organoselenium compounds, capable of propagating a selenium redox cycle, might therefore supplement natural cellular defenses against the oxidizing agents generated during metabolism. We now report evidence that selenium redox cycling can enhance the protective effects of organoselenium compounds against oxidant-induced DNA damage. Phenylaminoethyl selenides were found to protect plasmid DNA from peroxynitrite-mediated damage by scavenging this powerful cellular oxidant and forming phenylaminoethyl selenoxides as the sole selenium-containing products. The redox properties of these organoselenoxide compounds were investigated, and the first redox potentials of selenoxides in the literature are reported here. Rate constants were determined for the reactions of the selenoxides with cellular reductants such as glutathione (GSH). These kinetic data were then used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of the cellular oxidant, peroxynitrite. Experiments were then carried out in which peroxynitrite-mediated plasmid DNA nick formation in the presence or absence of organoselenium compounds and GSH was monitored. The results demonstrate that GSH-mediated redox cycling of selenium enhances the protective effects of phenylaminoethyl selenides against peroxynitrite-induced DNA damage.     

Photophysical properties of methyl triazone included in MCM-41

Methyl triazone (4,4',4'-[1,3,5-triazine-2,4,6-triyltriimino]tris-trimethyl benzoate) has been included in mesoporous MCM-41 (Mobil's composition of matter-41) silica, and its fluorescence emission has been compared in solution and in the solid state. Although inclusion does not affect significantly the absorption properties, a fluorescence emission shift and a behavior similar to the solid state has been observed by increasing the loading. It is believed that this observation reflects molecular aggregation inside the MCM-41 channels. The potential of formulations of this type for sunscreen applications is discussed.     

Vibrational exciton delocalization precludes the use of infrared intensities as proxies for surfactant accumulation on aqueous surfaces

Surface-sensitive vibrational spectroscopy is a common tool for measuring molecular organization and intermolecular interactions at interfaces. Peak intensity ratios are typically used to extract molecular information from one-dimensional spectra but vibrational coupling between surfactant molecules can manifest as signal depletion in one-dimensional spectra. Through a combination of experiment and theory, we demonstrate the emergence of vibrational exciton delocalization in infrared reflection–absorption spectra of soluble and insoluble surfactants at the air/water interface. Vibrational coupling causes a significant decrease in peak intensities corresponding to C–F vibrational modes of perfluorooctanoic acid molecules. Vibrational excitons also form between arachidic acid surfactants within a compressed monolayer, manifesting as signal reduction of C–H stretching modes. Ionic composition of the aqueous phase impacts surfactant intermolecular distance, thereby modulating vibrational coupling strength between surfactants. Our results serve as a cautionary tale against employing alkyl and fluoroalkyl vibrational peak intensities as proxies for concentration, although such analysis is ubiquitous in interface science.

Coupling between surfactant molecules at the air/water interface bleeds intensity into a diffuse background, such that single-wavelength vibrational intensity is effectively depleted at high surface coverage.     

Structural Study of Alkaline 1-Phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate Salts: An Example of Periodicity in Alkaline Cations

The alkaline 1-phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate salts, M[C₆H₅N₄CS] (M = Li ( 1 ), Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 )) were obtained and characterized by means of mass spectrometry (FAB⁺) and NMR (¹H; ¹³C) spectroscopy. The structures of Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 ) compounds were determined by X-ray diffraction methods. The ligand shows a rich variety of coordination patterns with the alkaline cations. The formation of a four-membered ring MSCN in the compounds with heavier alkali cations (K, Rb and Cs) is shown. In all the cations the coordination number around it increases with the ionic radius. Compounds with Cs⁺ and Rb⁺ exhibited the formation of Cs-C and Rb-C interactions with the phenyl group.     

Context-dependent behavior of the enterocin iterative polyketide synthase; a new model for ketoreduction

Heterologous expression and mutagenesis of the enterocin type II polyketide synthase (PKS) system suggest for the first time that the association of an extended set of proteins and substrates is needed for the effective production of the enterocin-wailupemycin polyketides. In the absence of its endogenous ketoreductase (KR) EncD in either the enterocin producer "Streptomyces maritimus" or the engineered host S. lividans K4-114, the enterocin minimal PKS is unable to produce benzoate-primed polyketides, even when complemented with the homologous actinorhodin KR ActIII or with EncD active site mutants. These data suggest that the enterocin PKS requires EncD to serve a catalytic and not just a structural role in the functional PKS enzyme complex. This strongly implies that EncD reduces the polyketide chain during elongation rather than after its complete assembly, as suggested for most type II PKSs.