Fast screening of 88 pharmaceutical drugs and metabolites in whole blood by ultrahigh-performance liquid chromatography–tandem mass spectrometry

Forensic investigations involving acute or lethal intoxication, drug-facilitated sexual assault, driving or workplace impairment frequently require the analysis of fresh or postmortem blood samples to check out a wide variety of pharmaceutical and illicit drugs, even after single-dose consumption. A sensitive and selective ultrahigh-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) screening method was developed for fast screening of 88 psychoactive drugs and metabolites in blood samples, including the ones most frequently involved in acute intoxications and forensic investigations in Italy. The new method allows short sample processing and analysis time (the whole procedure can be accomplished in less than 30 min) together with the simultaneous monitoring of a large number of pharmaceutical substances. These features represent crucial factors in the approach of acute intoxications, when the patient requires urgent and appropriate therapy. Blood sample treatment was limited to protein precipitation. Two UHPLC–MS/MS runs in positive and negative electrospray ionization modes were performed. The data were acquired at unit mass resolution in the selected reaction monitoring mode. According to international guidelines, linearity range, precision, trueness, detection and quantification limits, recovery, selectivity, specificity, carryover, and matrix effect phenomena were determined. Despite the limited sample purification and the inherent decreased chance of eliminating any potential interference, the present multiresidue screening method proved extremely effective and sensitive, allowing the detection of all tested drugs, even those belonging to structurally different classes of substances. Moreover, the developed method is easily susceptible to further expansion to encompass more drugs, either new or those becoming important for criminal investigation. This protocol was also applied to the analysis of authentic blood samples collected from victims of various crimes in routine casework, whose relevance in forensic investigations is presented in five cases.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

Mechanochemical preparation of hydrogen-bonded adducts between the diamine 1,4-diazabicyclo[2.2.2]octane and dicarboxylic acids of variable chain length: an X-ray diffraction and solid-state NMR study

Mechanical mixing of solid dicarboxylic acids of variable chain length HOOC(CH(2))(n)COOH (n = 1-7) with solid 1,4-diazabicyclo[2.2.2]octane generates the corresponding salts or co-crystals of the formula [N(CH(2)CH(2))(3)N]-H-[OOC(CH(2))(n)COOH] (n=1-7). Preparation of the same systems from solution has been instrumental for a full characterization of the mechanochemical products by means of single-crystal and powder-diffraction X-ray analyses, as well as by solid-state NMR. The acid-base adducts, whether involving proton transfer from the COOH group to the N-acceptor, that is having ((-))O...H-N((+)) interactions, or the formation of neutral O-H...N hydrogen bonds, show a melting point alternation phenomenon analogous to that shown by the neutral carboxylic acids. The carbon chemical shift tensors of the COOH group obtained from the sideband intensity of low speed spinning NMR spectra provide a reliable criterion for assigning the protonation state of the adducts.     

Pigment Production by Filamentous Fungi on Agro-Industrial Byproducts: an Eco-Friendly Alternative

The search for new sources of natural pigments has increased, mainly because of the toxic effects caused by synthetic dyes used in food, pharmaceutical, textile, and cosmetic industries. Fungi provide a readily available alternative source of natural pigments. In this context, the fungi Penicillium chrysogenum IFL1 and IFL2, Fusarium graminearum IFL3, Monascus purpureus NRRL 1992, and Penicillium vasconiae IFL4 were selected as pigments producers. The fungal identification was performed using ITS and part of the β-tubulin gene sequencing. Almost all fungi were able to grow and produce water-soluble pigments on agro-industrial residues, with the exception of P. vasconiae that produced pigments only on potato dextrose broth. The production of yellow pigments was predominant and the two strains of P. chrysogenum were the largest producers. In addition, the production of pigments and mycotoxins were evaluated in potato dextrose agar using TOF-MS and TOF-MS/MS. Metabolites as roquefortine C, chrysogine were found in both extracts of P. chrysogenum, as well fusarenone X, diacetoxyscirpenol, and neosolaniol in F. graminearum extract. In the M. purpureus extract, the pigments monascorubrin, rubropunctatin, and the mycotoxin citrinin were found. The crude filtrates have potential to be used in the textile industry; nevertheless, additional pigment purification is required for food and pharmaceutical applications.     

X-ray diffraction study of the smectic mesophase of some azobenzene-containing polyacrylates

Abstract

An X-ray study is performed on powder specimens and on stretched oriented fibres of two liquid crystalline polyacrylates containing the azobenzene mesogenic unit with either a 4′-n-pentyloxy (sample 1–4) or 4′-n-hexyloxy (sample 1–5) substituent. The X-ray diffraction patterns of both samples showed the presence of a bilayer smectic C mesophase with the mesogneic groups tilted by an angle β ～ 45° (1–4) or β ～ 38° (1–5) with respect to the layer normal. The electron density profile p(z) along the direction normal to the smectic layers was calculated by Fourier inversion and possible structural models of the smectic mesophase are discussed. A partial interdigitation of the terminal alkyloxy substituents appears to occur.     

X-ray structure and circular dichroism of pure rotamers of bis[guanosine-5'-monophosphate(-1)](N,N,N',N'-tetramethylcyclohexyl-1,2-diamine)platinum(II) complexes that have R,R and S,S configurations at the asymmetric diamine

The use of a sterically hindered diamine ligand (Me(4)DACH) has allowed for the first time, the isolation and characterization, both in the solid state (X-ray crystallography) and in solution (circular dichroism), of pure DeltaHT rotamers of [Pt(Me(4)dach)(5'-GMP)(2)] (compounds 1 and 2 for R,R and S,S configurations of the Me(4)DACH ligand, respectively). Comparison of the CD spectra obtained for each rotamer, which differ only in the chirality of the Me(4)DACH ligand (R,R or S,S) or in the chirality of the HT conformation (Delta or Lambda), allowed us to conclude that, in the 200-350 nm range, the contributions to the overall CD spectrum that stem from diamine chirality and diamine-induced chirality of platinum d--d transitions or from sugar chirality are negligible relative to the exciton chiral coupling that occurs for pi-pi* transitions of the cis guanines. Accurate molecular structures of 1.10 D(2)O and 2.14 D(2)O (conventional crystallographic agreement indexes R(1) convergent to 2.07 % and 2.18 %, respectively) revealed that the crystallized rotamers have a DeltaHT conformation that is in agreement with all previously reported X-ray structures of [Pt(diamine)(nucleos(t)ide)(2)] complexes. This conformation allows the 5'-phosphate to be located in proximity to the Me(4)DACH ligand so that (P)O...HC(N) hydrogen-bond interactions exists in both complexes. For both structures, the canting of the guanine planes on the coordination plane is right-handed (R; canting angle (Phi) of 80.9 degrees and 73.2 degrees, respectively); this indicates that the canting direction is driven by the HT conformation chirality (Delta for both compounds) and not by the chirality of the carrier ligand (different for the two compounds). Density functional theory analysis of the conformational space as a function of Phi indicated a good agreement between the computed and experimental structures. The increase in energy for Phi values below 65 degrees and 55 degrees (for 1 and 2, respectively) is mainly due to the short intramolecular contacts between C(8)H and the cis N-Me groups on the same side of the platinum coordination plane.     

The Impact of pH on Catalytically Critical Protein Conformational Changes: The Case of the Urease,a Nickel Enzyme

Urease uses a cluster of two Ni^II ions to activate a water molecule for urea hydrolysis. The key to this unsurpassed enzyme is a change in the conformation of a flexible structural motif, the mobile flap, which must be able to move from an open to a closed conformation to stabilize the chelating interaction of urea with the Ni^II cluster. This conformational change brings the imidazole side chain functionality of a critical histidine residue, αHis323, in close proximity to the site that holds the transition state structure of the reaction, facilitating its evolution to the products. Herein, we describe the influence of the solution pH in modulating the conformation of the mobile flap. High-resolution crystal structures of urease inhibited in the presence of N-(n-butyl)phosphoric triamide (NBPTO) at pH 6.5 and pH 7.5 are described and compared to the analogous structure obtained at pH 7.0. The kinetics of urease in the absence and presence of NBPTO are investigated by a calorimetric assay in the pH 6.0–8.0 range. The results indicate that pH modulates the protonation state of αHis323, which was revealed to have pK_a=6.6, and consequently the conformation of the mobile flap. Two additional residues (αAsp224 and αArg339) are shown to be key factors for the conformational change. The role of pH in modulating the catalysis of urea hydrolysis is clarified through the molecular and structural details of the interplay between protein conformation and solution acidity in the paradigmatic case of a metalloenzyme.     

Regio‐ and Enantio‐selective Chemo‐enzymatic C−H‐Lactonization of Decanoic Acid to (S)‐δ‐Decalactone

The conversion of saturated fatty acids to high value chiral hydroxy‐acids and lactones poses a number of synthetic challenges: the activation of unreactive C?H bonds and the need for regio‐ and stereoselectivity. Here the first example of a wild‐type cytochrome P450 monooxygenase (CYP116B46 from Tepidiphilus thermophilus) capable of enantio‐ and regioselective C5 hydroxylation of decanoic acid 1 to (S)‐5‐hydroxydecanoic acid 2 is reported. Subsequent lactonization yields (S)‐δ‐decalactone 3 , a high value fragrance compound, with greater than 90 % ee. Docking studies provide a rationale for the high regio‐ and enantioselectivity of the reaction.