Colorful Friedel-Crafts chemistry of meso-tetraarylporphyrins. An unexpected route to porphyrinic spiro dimers

Under Friedel-Crafts conditions, meso-tetraarylporphyrins give porphyrin spiro dimers in good yield. This reaction involves acylation, acid-catalyzed cyclization, and dimerization. A stable dimer possessing three additional six-membered rings could be isolated and its structure determined. By modifying the substrate and reagents, intermediates could be isolated and characterized. The reactivity of the substrates, the side-reactions, and the concentration requirements to form the dimers, all explain why this reaction remained apparently unexplored in the widely used meso-tetraarylporphyrin series. [reaction: see text]     

The electrophilic reactions of pentacyanonitrosylferrate(II) with hydrazine and substituted derivatives. Catalytic reduction of nitrite and theoretical prediction of eta(1)-, eta(2)-N(2)O bound intermediates

The electrophilic reactivity of the pentacyanonitrosylferrate(II) ion, [Fe(CN)(5)NO](2)(-), toward hydrazine (Hz) and substituted hydrazines (MeHz, 1,1-Me(2)Hz, and 1,2-Me(2)Hz) has been studied by means of stoichiometric and kinetic experiments (pH 6-10). The reaction of Hz led to N(2)O and NH(3), with similar paths for MeHz and 1,1-Me(2)Hz, which form the corresponding amines. A parallel path has been found for MeHz, leading to N(2)O, N(2), and MeOH. The reaction of 1,2-Me(2)Hz follows a different route, characterized by azomethane formation (MeNNMe), full reduction of nitrosyl to NH(3), and intermediate detection of [Fe(CN)(5)NO](3)(-). In the above reactions, [Fe(CN)(5)H(2)O](3)(-) was always a product, allowing the system to proceed catalytically for nitrite reduction, an issue relevant in relation to the behavior of the nitrite and nitric oxide reductase enzymes. The mechanism comprises initial reversible adduct formation through the binding of the nucleophile to the N-atom of nitrosyl. The adducts decompose through OH(-) attack giving the final products, without intermediate detection. Rate constants for the adduct-formation steps (k = 0.43 M(-)(1) s(-)(1), 25 degrees C for Hz) decrease with methylation by about an order of magnitude. Among the different systems studied, one-, two-, and multielectron reductions of bound NO(+) are analyzed comparatively, with consideration of the role of NO, HNO (nitroxyl), and hydroxylamine as bound intermediates. A DFT study (B3LYP) of the reaction profile allows one to characterize intermediates in the potential hypersurface. These are the initial adducts, as well as their decomposition products, the eta(1)- and eta(2)-linkage isomers of N(2)O.     

Protein secondary structure and stability determined by combining exoproteolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the post-genomic era, several projects focused on the massive experimental resolution of the three-dimensional structures of all the proteins of different organisms have been initiated. Simultaneously, significant progress has been made in the ab initio prediction of protein three-dimensional structure. One of the keys to the success of such a prediction is the use of local information (i.e. secondary structure). Here we describe a new limited proteolysis methodology, based on the use of unspecific exoproteases coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), to map quickly secondary structure elements of a protein from both ends, the N- and C-termini. We show that the proteolytic patterns (mass spectra series) obtained can be interpreted in the light of the conformation and local stability of the analyzed proteins, a direct correlation being observed between the predicted and the experimentally derived protein secondary structure. Further, this methodology can be easily applied to check rapidly the folding state of a protein and characterize mutational effects on protein conformation and stability. Moreover, given global stability information, this methodology allows one to locate the protein regions of increased or decreased conformational stability. All of this can be done with a small fraction of the amount of protein required by most of the other methods for conformational analysis. Thus limited exoproteolysis, together with MALDI-TOF MS, can be a useful tool to achieve quickly the elucidation of protein structure and stability.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

Droplet evaporation study applied to DNA chip manufacturing

DNA chips are potentially powerful technologies for genotyping and gene expression profiling that rely on comparative analyses of up to thousands of "spots of analysis" on a glass support. The spot quality throughout the support influences spot-to-spot variations within an array and the repeatability of data across experiments. For glass slide DNA microarrays, droplets of DNA solution are deposited on functionalized glass slides and left to react through complete evaporation of the droplet. On hydrophobic flat surfaces, different modes of droplet evaporation can be attained. Under atmospheric pressure, water droplets tend to evaporate under two main regimes. Initially, the droplet flattens with a constant contact area, and then the droplet shrinks at a constant contact angle. As a result, the diameter and morphology of thousands of spots on microarrays are not uniform. This leads to poor and unreliable data processing results. In this work, we report the evaporation of an aqueous solution under a constant contact area mode. Evaporation under reduced pressure and the effect of reagent additives to the solution have been investigated. Video microscopy and digital image analysis techniques were applied to monitor the evaporation of the droplets. A mixture of surfactants was developed to maintain a constant area regime during evaporation and to form homogeneous spots. The control of some physicochemical properties (wetting, evaporation rate) of the droplet allows the formation of well-controlled spots compatible with DNA grafting. The influence of surfactant molecules on the mechanisms of evaporation is also discussed.     

Influence of the coordination number of nitrogen on the structure of 6aλ4-thia-1,3,4,6-tetraazapentalenic systems. Crystal structure analyses of 3-(2-pyridylimino)-3H-[1,2,4]thiadiazolo[4,3-a]pyridine and its 1-methylated salt

Structural data were obtained by X-ray crystallography for the title compounds which show that they are essentially planar and exhibit an approximately linear N2-S1-N8 arrangement. In compound 3 the separation between the sulfur atom and the pyridine nitrogen atom (2.61 Å) is larger than the Huggins constant energy distance (2.58 Å), suggesting that there is little or no bonding between them. The methylated salt 4 , on the contrary, has a closer S…N(pyridine) distance (2.19 Å) with an estimated bond dissociation energy of 6 kcal/mole.     

Influence of a silyl group on an allylic position. A theoretical approach

Allylsilanes show in certain cases a behaviour towards electrophiles which is opposite to that of its carbon homologues. Theoretical calculations using Dewar's MINDO/3 method performed on 3-methyl 3-butenyl trimethylsilane and 2-methyl 2-butene show that geometrical optimization leads to a silicon-allylic carbon bond nearly parallel to the double bond π cloud, and both net atomic charges and HOMO coefficients indicate an inversion between these two substrates.     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.