A systematic study of the interactions between chemical partners (metal, ligands, counterions, and support) involved in the design of Al2O3-supported nickel catalysts from diamine-Ni(II) chelates

1.5 Ni wt %/Al2O3 catalysts have been prepared by incipient wetness impregnation using [Ni(diamine)x(H2O)(6-2x)]Y2 precursors (diamine = 1,2-ethanediamine (en) and trans-1,2-cyclohexanediamine (tc); x = 0, 1, and 2; Y = NO3- and Cl-), to avoid the formation, during calcination, of difficult-to-reduce nickel aluminate. N2 was chosen for thermal treatment to help reveal and take advantage of the reactions occurring between Ni2+, ligands, counterions, and support. In the case of [Ni(en)2(H2O)2]Y2 salts used as precursors, in situ UV-vis and DRIFT spectroscopies show that after treatment at 230 degrees C Ni(II) ions are grafted to alumina via two OAl bonds and that the diamine ligands still remain coordinated to grafted nickel ions but in a monodentate way, bridging the cation with the alumina surface. With Y = Cl-, the chloride counterions desorb as hydrogen chloride, and hydrogen released upon decomposition of the en ligands is able to reduce a fraction of nickel ions into metal as evidenced by XPS. In contrast, with Y = NO3-, compounds such as CO or NO are formed during thermal treatment, indicating that nitrate ions burn the en ligands. After thermal treatment at 500 degrees C, a surface phase containing Ni(II) ions forms, characterized by XPS and UV-vis spectroscopy. Temperature-programmed reduction shows that these ions can be quantitatively reduced to the metallic state at 500 degrees C, in contrast with the aluminate obtained when the preparation is carried out from [Ni(H2O)6]2+, which is reduced only partly at 950 degrees C. On the other hand, a total self-reduction of nickel complexes leading to 2-5-nm metal particles is obtained upon thermal treatment via the hydrogen released by a hydrogen-rich ligand such as tc, whatever the Y counterion. An appropriate choice of the ligand and the counterion allows then to obtain selectively Ni(II) ions or a dispersed reduced nickel phase after treatment in N2, as a result of the reactions occurring between the chemical partners present on alumina.     

Utilization of cyclotron produced fast neutrons in the activation analysis for oxygen

The possible application of cyclotron-produced fast neutrons to activation analysis for oxygen based on the¹⁶O(n, p)¹⁶N reaction has been investigated. Neutrons were produced by bombarding a thick beryllium target with 22 to 45 MeV deuterons. It was found that the sensitivity increases rapidly with the energy of the deuterons. Using 45 MeV deuterons and a 10 μA beam current a sensitivity of about 20 counts per 1 μg oxigen could be achieved, enabling the determination of less than 1 μg oxigen. In a direct comparison it was experimentally established that the sensitivity for cyclotron-produced neutrons assuming a deuteron beam of about 10 μA, is up to two orders of magnitude higher than that achievable for 14 MeV neutrons with a flux of about 10¹⁰ n/s. The interference of fluorine is at about the same level for both the cyclotron-produced and 14 MeV neutrons. Using cyclotron-produced fast neutrons in the investigated energy range, sodium and magnesium can also interfere, but only to a very much lower extent.     

First access to the spin-labelled β-amino acid POAC in an enantiopure state by resolution through its binaphthyl esters

Resolution of trans 3-(9-fluorenylmethyloxycarbonylamino)-1-oxyl-2,2,5,5-tetramethylpyrrolidine-4-carboxylic acid (Fmoc-POAC-OH) was quickly achieved upon esterification with (aR)-1,1′-binaphthyl-2,2′-diol, chromatographic separation of the obtained diastereomers, and facile saponification of the aryl ester function with removal of the chiral auxiliary.     

Does charge carrier dimensionality increase in mixed-valence salts of tetrathiafulvalene-terminated dendrimers?

[structure: see text] In four new dendrimers terminated by 12 electroactive tetrathiafulvalenyl substituents, the tridimensional character of the inter- and intradendrimeric charge and electron transfer, and hence of the electroconductivity, is evidenced by examination of the electronic spectra of their corresponding neutral state and cation radical, dication, and mixed-valence salts, including a closed-shell anion.     

Permeation liquid membrane for trace metal speciation in natural waters. Transport of liposoluble Cu(II) complexes

In this paper, the transport of Cu(II) in the presence of lipophilic Cu(II) organic complexes through permeation liquid membranes (PLMs) have been investigated. In natural waters, small organic compounds, which form liposoluble neutral complexes with Cu(II), are potentially toxic and bioavailable. Hence, to understand the role of liposoluble Cu(II) complexes in natural waters, four organic ligands: phthalic acid, bipyridyl, pyrocatechol and hydroxyquinoline, which form uncharged or lipophilic Cu(II) complexes, were tested. The results showed that the transport of lipophilic Cu(II) complexes through PLM depends on the lipophilicity of the complex. Applications of PLMs in natural waters are presented.     

Synthesis of phosphonocinnamic thioesters, substrate analogues of cinnamoyl-CoA reductase, a key enzyme in the lignification process

The one-pot transesterification of diethylarylvinylphosphonates with N-acetylcysteamine has been achieved using phosphonochloridates as intermediates. Reaction of phosphonodiesters with (COCl)₂ gave the corresponding chlorinated compounds, which were coupled with N-acetylcysteamine in presence of Et₃N.     

Réactivité de spirochromènes et de mérocyanines azahétérocycliques vis-à-vis de quelques agents nucléophiles

Under the action of nucleophile reagents such as water, hydrogen sulfide and sodium borohydride, the saturated azaheterocyclic spirochromenes are opened either on the azaheterocyclic side or on the benzopyran side or on both parts simultaneously. The merocyanines are either partially reduced or decomposed by the sodium borohydride.     

Decarboxylation catalytique et quantitative d'acides arylacetiques en presence'de cuivre I

Copper(I) salts of arylacetic acids $\text{1}$ RCO₂H readily undergo a catalytic and quantitative decarboxylation in acetonitrile leading to hydrocarbons $\text{2}$ RH when the corresponding carbanions R are stabilized by resonance and/or electronwithdrawing substituents.     

Complex copper(II) fluorides. XV. The Ternary System BaF2?CuF2?ScF3

The liquid-solid phase diagram of the binary system BaF₂? ScF₃ is established by D.T.A. and radiocrystallography. Three fluorides are disclosed: Ba₃Sc₂F₁₂, Ba₅Sc₃F₁₉ and a cubic high temperature phase Ba_1?xSc_xF_2+x (x = 0.17), the structure of which derives from that of BaF₂. A solid solution between BaF₂ and ScF₃ is also evidenced at high temperature. The ternary system BaF₂? CuF₂? ScF₃ is investigated by radiocrystallography and an isothermal section at 670°C is given. It shows the existence of four phases: a complex quaternary fluoride Ba₁₀Cu₁₂ScF₄₇, two “polytypic” phases the structure of which derives from that of BaCuF₄ and a tetragonal solid solution Ba₅Sc_3?xCu_xF_19?x with 0 ≤ x ≤ 1.     

Use of uranium isotopes for the determination of river tributary flow rates: Case of the Var and the Vésubie

When a river flow rate is known on one point, it is possible to determine the one of upstream tributaries. This can be done by measuring the concentrations of a dissolved element (for example Ca²⁺), provided that no chemical precipitations have occurred in mixture waters. In this later case, the determination of flow rate is however possible by isotopic geochemistry, by knowing isotopic ratios of an element, for ex. ²³⁴U/²³⁸U, in each river considered and the ratio of the concentrations in dissolved ²³⁸U in two of them. A study of the Var and its tributary the Vésubie is performed: in January 31st, 2001, the flow rate D₃, downstream the confluence was 35 m³/s. The ratio of the ²³⁸U concentrations in the Vésubie river and in the Var upstream (²³⁸U₁/²³⁸U₂) was 5.5. The isotopic ratios ²³⁴U/²³⁸U measured in the Var, downstream the confluence were R₃ = 1.51, upstream R₂ = 1.75, and in the Vésubie R₁ = 1.08. We have calculated the Vésubie flow rate as D₁ = 3.2 m³/s.