New liquid crystal based on 2-phenylthiophene central core

Six series of bent-shaped liquid crystals based on phenylthiophene central unit and differing in lateral substitution, the number and orientation of ester linkages and character of the terminal chain have been synthesised and studied. In comparison with the previously investigated biphenyl-based analogues, the presence of the thiophene unit results in a strong increase of transition temperatures and appearance of calamitic phases, the character of which depended on the structural changes of mesogens.     

Liquid chromatographic method for enantiopurity control of alaptide using polysaccharide stationary phases

Separation of veterinary drug alaptide ((S)-8-methyl-6,9-diazaspiro(4,5)decane-7,10-dione) from a chiral impurity (R-enantiomer) was developed. Five chiral columns (three amylose and two cellulose type) were evaluated in a reversed-phase system. Three of them offered satisfactory enantiomeric resolution. Finally, three methods were validated and proved to be applicable for the determination of a chiral impurity content below 0.1% (method A: 3-AmyCoat column, tris-[3,5-dimethylphenyl]carbamoyl amylose; mobile phase: water/methanol/propan-2-ol/butan-2-ol=75:20:3.5:1.5 v/v, flow rate: 0.40 mL/min; column temperature: 30 °C; method B: Chiralpak AS-3R, tris-[1-phenylethyl]carbamoyl amylose; water/acetonitrile=80:20 v/v, 0.40 mL/min; 40 °C; method C: Chiralcel OZ-3R, tris-[3-chloro-4-methylphenyl] carbamoyl cellulose; water/acetonitrile=80:20 v/v, 0.40 mL/min; 40 °C). Some decrease in efficiency with repeated sample injections was observed for the 3-AmyCoat column. The resistance to mass transfer in the stationary phase increased probably due to the change in chiral selector conformation. This effect was considerably suppressed by propan-2-ol or to a greater extent by butan-2-ol added to a mobile phase. Simple regeneration was also suggested to recover efficiency of the column.     

Bis(di‐2‐pyridylamine‐κ2N2,N2′)(nitrato‐κ2O,O′)nickel(II) nitrate

<!?tpct=26.8pt>In the ionic title compound, [Ni(NO₃)(C₁₀H₉N₃)₂]NO₃, the central Ni^II atom exhibits cis‐NiN₄O₂ octahedral coordination with three chelating ligands, viz. one nitrate anion and two di‐2‐pyridylamine (dpya) molecules. A second nitrate group acts as a counter‐ion. The complex cations and the nitrate anions are also linked by N—H...O hydrogen bonds. The compound was prepared in two different reproducible ways: direct synthesis from Ni(NO₃)₂ and dpya yielded systematically twinned crystals (the twinning law is discussed), while single crystals were obtained unexpectedly from the Ni(NO₃)₂/dpya/maleic acid/NaOH system.     

Facile Approach to C-Glucosides by Using a Protecting-Group-Free Hiyama Cross-Coupling Reaction: High-Yielding Dapagliflozin Synthesis

Access to unprotected (hetero)aryl pseudo-C-glucosides via a mild Pd-catalysed Hiyama cross-coupling reaction of protecting-group-free 1-diisopropylsilyl-d -glucal with various (hetero)aryl halides has been developed. In addition, selected unprotected pseudo-C-glucosides were stereoselectively converted into the corresponding α- and β-C-glucosides, as well as 2-deoxy-β-C-glucosides. This methodology was applied to the efficient and high-yielding synthesis of dapagliflozin, a medicament used to treat type 2 diabetes mellitus. Finally, the versatility of our methodology was proved by the synthesis of other analogues of dapagliflozin.     

Scalable production of magnetic fluorescent cellulose microparticles

Cellulose - Fluorescent and magnetic nano- and microparticles have already been used for wide range of (bio)applications. Multimodal imaging as well as simultaneous control and monitoring of...     

Determination of phenolic acids by capillary zone electrophoresis and HPLC

Selected phenolic acids are determined by capillary zone electrophoresis and HPLC, each using UV detection. The optimised CZE background electrolyte contained 50 mM acetic acid, 95 mM 6-aminocaproic acid, 0.1% polyacrylamide, 1% polyvinylpyrrolidone, and 10% methanol. Twelve phenolic acids (gallic, p-hydroxybenzoic, 3,4-dihydroxybenzoic, vanillic, syringic, o-coumaric, p-coumaric, caffeic, sinapic, ferulic, salicylic and chlorogenic) were separated within 10 minutes. Chromatographic separation of these phenolic acids was carried out on an Eclipse XBD C8 column using a mobile phase gradient (acetonitrile / methanol / water / 0.1% phosphoric acid); all were separated within 25 minutes. Electrophoretic and chromatographic determinations of ferulic and chlorogenic acids were compared on barley, malt, and potato samples. The methods’ characteristics were: linearity (1–20 mg ml and 0.2–4 mg ml⁻¹), accuracy (recovery 94 ± 5% and 96 ± 4%), intra-assay repeatability (4.1% and 3.5%), and detection limit (0.2 and 0.02 mg ml⁻¹).      

Rapid determination of ambrisentan enantiomers by enantioselective liquid chromatography using cellulose-based chiral stationary phase in reverse phase mode

A sensitive, specific, and rapid high-performance liquid chromatography (HPLC) method for the determination of ambrisentan enantiomers has been developed and validated. Six chiral columns were tested in a reversed-phase system. Excellent enantioseparation with the resolution more than 2.5 was achieved on Chiralcel OZ-3R (cellulose 3-chloro-4-methylphenylcarbamate) using mixture of 20 mM sodium formate (pH 3.0) with acetonitrile (55:45; v/v). Validation of the HPLC method including linearity, limit of detection, limit of quantification, precision, accuracy, and selectivity was performed according to the International Conference on Harmonisation (ICH) guidelines. The method has an advantage of a very quick chromatographic separation (less than 6 min) and therefore is highly suitable for routine determination of (R)-ambrisentan in enantiopure active pharmaceutical ingredient (S)-ambrisentan.     

Determination of Evans blue as a blood–brain barrier integrity tracer in plasma and brain tissue by UHPLC/UV method

Blood–brain barrier changes are an integral part of many neurodegenerative diseases. Evans blue is an intravital dye that binds to albumin and can therefore be used to monitor extravasation of this plasma protein across blood–brain barrier in animal models of neurodegeneration. To monitor extravasation of albumin across blood–brain barrier, we developed and validated an ultrahigh-performance liquid chromatography method for the analysis of Evans blue in rat plasma and brain samples. Analyte was separated on ACQUITY UPLC BEH C18 column (2.1?mm?×?50?mm) using a 5-min gradient run and detected by a UV detector. The limits of quantification (LOQ) were 10?µg/mL in plasma and 0.5?µg/g in brain samples. The limits of detection (LOD) were 1?µg/mL in plasma and 0.015?µg/g in brain samples. The method showed excellent linearity with regression coefficients higher than 0.99. The accuracy was within the range of 91–105%. The inter-day precision was in the range of 1.3–8%. The benefits of using UPLC are selectivity, short analysis period, and thus, a very good sample throughput. Using this method, we analyzed albumin extravasation across blood–brain barrier in transgenic rat model for tauopathy SHR-72 and age-matched control animals.     

The effect of different atmospheres on structural changes of titanate nanotubes during heating

Thermal stability of titanate nanotubes (Ti-NT) was studied in temperature range from room temperature up to 1000 °C in three different atmospheres—in air, vacuum and helium—and differences were observed. In air, vacuum and helium, the release of adsorbed and crystal water was detected in temperatures up to 200 °C. Transformation of the initial structure to anatase form of TiO₂ was found independently of the atmosphere used. But in air the transformation to anatase occurred at lower temperature. The difference between these atmospheres was approximately 100 °C. However, only in air, the transformation to sodium hexatitanate and rutile form of TiO₂ occurred at higher temperatures. In vacuum, only the anatase phase was detected up to 800 °C. In helium, the transformation to rutile was observed but not to sodium hexatitanate. The changes of the initial structure of Ti-NT during the elevation of temperature were studied by combination of in situ powder X-ray diffraction, differential scanning calorimetry, thermal gravimetric analysis and mass spectroscopy.