Zirconium complexes having a chiral phosphanylamide in the co-ordination sphere

The chiral phosphanylamido ligand, (N(CHMePh)(PPh2))-, has been introduced into co-ordination chemistry. As starting material the oily amines HN(R-*CHMePh)(PPh2)(1a) and HN(S-*CHMePh)(PPh2)(1b) were used. To reconfirm their absolute structure, 1b was oxidized with H2O2 in air to obtain HN(S-*CHMePh)(P(O)Ph2)(2) as a solid compound. The solid-state structure of 2 was established by single-crystal X-ray diffraction. The lithium salts of both enantiomers Li(N(R-*CHMePh)(PPh2))(3a) and Li(N(S-*CHMePh)(PPh2))(3b) were prepared by deprotonation reaction of 1a,b. Compounds 3a,b were further reacted with zirconocen dichloride to give the chiral metallocenes [(eta5-C5H5)2Zr(Cl)(eta2-N(R-*CHMePh)(PPh2))](4a) and [(eta5-C5H5)2Zr(Cl)(eta2-N(S-*CHMePh)(PPh2))](4b). In an alternative approach to give chiral zirconium compounds, the neutral amine 1b was reacted with [(PhCH2)4Zr] to give the enantiomeric pure complex [(PhCH2)3Zr(eta2-N(S-*CHMePh)(PPh2))](5). The solid-state structures of all zirconium complexes were determined by single-crystal X-ray diffraction.     

Stationary-phase effects in gradient high-performance liquid chromatography

The type of the stationary phase for reversed-phase liquid chromatography significantly affects the sample polarity range that can be covered using gradients of organic solvents in water. The polarity range available for gradient separations of samples containing compounds differing in the lipophilic parts of the molecules can be characterized by "gradient lipophilic capacity", Pl, based on the retention of standard compounds with a repeat lipophilic structural unit, such as a methylene group. The gradient lipophilic capacity is also suitable to characterize the separation possibilities of the columns in non-aqueous reversed-phase gradient elution of strongly non-polar compounds, such as triacylglycerols. In the same way, the suitability of various columns for reversed-phase gradient separations of oligomers can be characterized by "gradient oligomer capacity", as demonstrated in the example of oligo(ethylene glycols). To enable a comparison of the properties of stationary phases independent of column efficiency and dimensions, the gradient lipophilic capacity or the gradient oligomer capacity should be normalized for a "standard" column plate number, gradient range and volume (in column hold-up volume units). The gradient lipophilic capacity or the gradient oligomer capacity and the number of compounds that can be resolved during a gradient run decrease as the initial concentration of the strong solvent in the mobile phase increases and (or) the gradient time decreases. These quantities can be used to select a suitable column and to adjust the optimum gradient profile (the initial composition of the mobile phase and the gradient steepness) with respect to the time of analysis and the number of oligomers or other compounds with regular repeat structural groups that can be resolved during the gradient run.     

Atomic force microscopy study of the adsorption and electrostatic self-organization of poly(amidoamine) dendrimers on mica

The adsorption behavior of poly(amidoamine) dendrimers to mica surfaces was investigated as a function of ionic strength and pH. The conformation and lateral distribution of the adsorbed dendrimers of generations G8 and G10 were obtained ex situ by tapping mode atomic force microscopy (AFM). The deposition kinetics of the dendrimers was found to follow a diffusion-limited process. Fractional surface coverage and pair correlation functions of the adsorbed dendrimers were obtained from the AFM images. The data are interpreted in terms of the random sequential adsorption (RSA) model, where electrostatic repulsion due to overlapping double layers is considered. Although the general trends typical for an RSA-determined process are well-reproduced, quantitative agreement is lacking at low ionic strengths.     

Gas chromatography–triple quadrupole tandem mass spectrometry: a powerful tool for the (ultra)trace analysis of multiclass environmental contaminants in fish and fish feed

A new method for rapid determination of 73 target organic environmental contaminants including 18 polychlorinated biphenyls, 16 organochlorinated pesticides, 14 brominated flame retardants and 25 polycyclic aromatic hydrocarbons in fish and fish feed using gas chromatography coupled with triple quadrupole tandem mass spectrometry (GC–MS/MS) was developed and validated. GC–MS/MS in electron ionization mode was shown to be a powerful tool for the (ultra)trace analysis of multiclass environmental contaminants in complex matrices, providing measurements with high selectivity and sensitivity. Another positive aspect characterizing the newly developed method is a substantial simplification of the sample preparation, which was achieved by an ethyl acetate QuEChERS (quick, easy, cheap, effective, rugged and safe) based extraction followed by silica minicolumn clean-up. With use of this sample preparation approach the sample laboratory throughput was increased not only because six samples may be prepared in approximately 1 h, but also because all the above-mentioned groups of contaminants can be determined in a single GC–MS/MS run. Under the optimized conditions, the recoveries of all target analytes in both matrices were within the range from 70 to 120 % and the repeatabilities were 20 % or less. The method quantification limits were in the range from 0.005 to 1 μg kg^–1 and from 0.05 to 10 μg kg^–1 for fish muscle tissue and fish feed, respectively. The developed method was successfully applied to the determination of halogenated persistent organic pollutants and polycyclic aromatic hydrocarbons in fish and fish feed samples.     

Structural characterization of electrochemically and in vitro biologically generated oxidation products of atorvastatin using UHPLC/MS/MS

Ultrahigh-performance liquid chromatography coupled with high-mass-accuracy tandem mass spectrometry (UHPLC–MS–MS) has been used for elucidation of the structures of oxidation products of atorvastatin (AT), one of the most popular commercially available drugs. The purpose of the study was identification of AT metabolites in rat hepatocytes and comparison with electrochemically generated oxidation products. AT was incubated with rat hepatocytes for 24 h. Electrochemical oxidation of AT was performed by use of a three-electrode off-line system with a glassy carbon working electrode. Three supporting electrolytes (0.1 mol L^?1 H₂SO₄, 0.1 mol L^?1 HCl, and 0.1 mol L^?1 NaCl) were tested, and dependence on pH was also investigated. AT undergoes oxidation by a single irreversible process at approximately +1.0 V vs. Ag/AgCl electrode. The results obtained revealed a simple and relatively fast way of determining the type of oxidation and its position, on the basis of characteristic neutral losses (NLs) and fragment ions. Unfortunately, different products were obtained by electrochemical oxidation and biotransformation of AT. High-mass-accuracy measurement combined with different UHPLC–MS–MS scans, for example reconstructed ion-current chromatograms, constant neutral loss chromatograms, or exact mass filtering, enable rapid identification of drug-related compounds. β-Oxidation, aromatic hydroxylation of the phenylaminocarbonyl group, sulfation, AT lactone and glycol formation were observed in rat biotransformation samples. In contrast, a variety of oxidation reactions on the conjugated skeleton of isopropyl substituent of AT were identified as products of electrolysis.

Eigenmobilities in background electrolytes for capillary zone electrophoresis: III. Linear theory of electromigration

A mathematical model of capillary zone electrophoresis (CZE) based on the conception of eigenmobilities, which are the eigenvalues of a matrix M tied to the linearized governing equations is presented. The model considers CZE systems, where constituents, either analytes or components of the background electrolyte (BGE), are weak electrolytes--acids, bases, or ampholytes. There is no restriction on the number of components nor on the valence of the constituents nor on pH of the BGE. An electrophoretic system with N constituents has N eigenmobilities. In most BGEs one or two eigenmobilities are very close to zero so their corresponding eigenzones move very slowly. However, there are BGEs where no eigenmobility is close to zero. The mathematical model further provides: the transfer ratio, the molar conductivity detection response, and the relative velocity slope. This allows the assessment of the indirect detection, conductivity detection and peak broadening (distortion) due to electromigration dispersion. Also, we present a spectral decomposition of the matrix M to matrices allowing the assessment of the amplitudes of system eigenpeaks (system peaks). Our model predicted the existence of BGEs having no stationary injection zone (or water zone, gap, peak, dip). A common practice of using the injection zone as a marker of the electroosmotic flow must fail in such electrolytes.     

The effect of electron detachment on the structure and properties of the chlorine-acetonitrile anionic complex

The results of the theoretical study of ground state potential energy surfaces for the chlorine-acetonitrile anion and its photodetachment product are presented. The shallow potential surfaces allow for the nondefinitive position of the chlorine within the complex. The dissociation energy of the neutral complex, estimated through the thermodynamic cycle, indicates significant structural changes due to the photodetachment process. The excess negative charge is localized mostly on the chlorine atom, and the electron detachment proceeds as an electron is removed from chlorine. The process leads to drastic changes in the electrostatic interactions within the complex. The first electronic excited state corresponds to the excess electron transfer from chlorine to acetonitrile fragment. This state is a precursor of the observed charge-transfer-to-solvent state.     

Effects of heat treatment on the aggregation and charging of Stöber-type silica

Measuring and modeling the surface charge of clays, and more especially smectites, has become an important issue in the use of bentonites as a waste confinement material aimed at retarding migration of water and solutes. Therefore, many studies of the acid-base properties of montmorillonite have appeared recently in the literature, following older studies principally devoted to cation exchange. It is striking that beyond the consensus about the complex nature of the surface charge of clays, there are many discrepancies, especially concerning the dissociable charge, that prevents intercomparison among the published data. However, a general trend is observed regarding the absence of common intersection point on raw titration curves at different ionic strengths. Analysis of the literature shows that these discrepancies originate from the experimental procedures for the preparation of the clays and for the quantification of their surface charge. The present work is an attempt to understand how these procedures can impact the final results. Three critical operations can be identified as having significant effects on the surface properties of the studied clays. The first one is the preparation of purified clay from the raw material: the use of acid or chelation treatments, and the repeated washings in deionized water result in partial dissolution of the clays. Then storage of the purified clay in dry or wet conditions strongly influences the equilibria in the subsequent experiments respectively by precipitation or enhanced dissolution. The third critical operation is the quantification of the surface charge by potentiometric titration, which requires the use of strong acids and bases. As a consequence, besides dissociation of surface sites, many secondary titrant consuming reactions were described in the literature, such as cation exchange, dissolution, hydrolysis, or precipitation. The cumulated effects make it difficult to derive proper dissociation constants, and to build adequate models. The inadequation of the classical surface complexation models to describe the acid-base behavior of clays is illustrated by the electrokinetic behavior of smectites, which is independent from the pH and the ionic strength. Therefore, there is still a need on one hand for accurate data recorded in controlled conditions, and on the other hand for new models taking into account the complex nature of the charge of clays.     

Unequal siblings: Adverse characteristics of naphtalene‐based hoveyda‐type second generation initiators in ring opening metathesis polymerization

A family of four different Hoveyda‐type initiators bearing a π‐extended carbene ligand was characterized regarding the activity in ring opening metathesis polymerization. One of the initiators shows high activity at ambient temperature, similar to the second generation Hoveyda–Grubbs catalyst and is even suited for the controlled polymerization of certain norbornene derivatives. The other family members exhibit a pronounced latency at room temperature, and polymerization can be triggered by heat. The scope of these initiators in the thermally triggered polymerizations of norbornene derivatives in general and dicyclopentadiene in particular was disclosed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.