Pyrrolodiazines. 2. Structure and Chemistry of Pyrrolo[1,2-a]pyrazine and 1,3-Dipolar Cycloaddition of Its Azomethine Ylides

A new synthesis of the pyrrolo[1,2-a]pyrazine system from pyrrole is described. In light of the ab initio calculations carried out on this heterocyclic system some of its basic chemistry was investigated and included electrophilic substitution, addition of organolithium reagents, metalation with lithium diisopropylamide and subsequent reaction with electrophiles, and formation of salts by quaternization of the nonbridgehead nitrogen. N-ylides obtained from these salts undergo 1,3-dipolar cycloaddition with suitable dipolarophiles to give dipyrrolo[1,2-a]pyrazines, pyrazolo[1,5-a]-pyrrolo[2,1-c]pyrazines, and heterobetaines. Examples of intramolecular 1,3-dipolar cycloadditions are also reported.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Investigation of the negative thermal expansion mechanism of zeolite chabazite using the pair distribution function method

We have used the pair distribution function (PDF) method to gain insight into the mechanism of contraction of zeolite chabazite. Using this method we followed how the interatomic distances of the local structure changed with temperature. By optimization of the structure by free energy minimization and using the Reverse Monte Carlo technique we were able to find structural models at low and at high temperatures that agreed quantitatively with our experimental PDFs. From these models we conclude that the mechanism of contraction with temperature cannot involve rocking of the tetrahedra as rigid unit modes as there are distortions of the tetrahedra with temperature (indicating internal vibrations) and also that the mechanism of contraction probably involves a mode that translates along the Si-O3-Si-O4-Si linkages inside of the D6R of zeolite chabazite.     

Development of a perfusion reversed-phase HPLC method for the separation of soybean and cereal (wheat, corn, and rice) proteins in binary mixtures. Application to the detection of soybean proteins in commercial bakery products

A perfusion reversed-phase HPLC method enabling the simultaneous separation of soybean and cereal (wheat, corn, and rice) proteins in commercial bakery products has been proposed for the first time. The method utilises an acetonitrile-water gradient containing an ion-pairing agent. Different ion-pairing agents were tried, 0.3% (v/v) acetic acid being observed to enable the separation of soybean from wheat, rice, and corn proteins while with 0.1% (v/v) trifluoroacetic acid only the separation of soybean and corn proteins was possible. Optimisation of the solubilisation conditions for proteins was achieved by testing different acetonitrile concentrations for the simultaneous extraction of soybean and cereal proteins: best recoveries were found with 25% (v/v) acetonitrile + 0.3% (v/v) acetic acid and with 40% (v/v) acetonitrile + 0.1% (v/v) trifluoroacetic acid. Chromatographic conditions such as gradient, temperature, and wavelength detection were also optimised. The method enabled the separation of soybean and cereal proteins in binary mixtures (soybean and wheat, soybean and corn, or soybean and rice proteins) in less than 5 minutes in a total analysis time of 20 min.     

Evaluating and monitoring the packing behavior of process-scale chromatography columns

The packing characteristics of process-scale chromatography columns were evaluated using the responses to conductivity-based pulse and step inputs derived from tracer experiments and in-process transitions (i.e. column equilibration and regeneration steps). Characteristics of the measured residence time distributions (RTDs) were quantified by statistical moments and using the equations derived from the Gaussian model. The first and second moments calculated from in-process step transitions for multiple runs were in good agreement with those moments calculated from the pulse-input experiments conducted immediately after column packing. This indicates that most of the time the bed behavior at the time of packing is consistent with that at the time of operation. Due to the significant resistance to protein mass transfer inside the particles, estimated plate heights for protein solutes are expected to be much greater than those observed from the experiments using saltbased tracers. Thus, the column efficiency derived from salt-based experiments can be a useful measure of packing consistency rather than a significant parameter influencing the outcome of protein separations.     

Cluster size selectivity in the product distribution of ethene dehydrogenation on niobium clusters

Ethene reactions with niobium atoms and clusters containing up to 25 constituent atoms have been studied in a fast-flow metal cluster reactor. The clusters react with ethene at about the gas-kinetic collision rate, indicating a barrierless association process as the cluster removal step. Exceptions are Nb8 and Nb10, for which a significantly diminished rate is observed, reflecting some cluster size selectivity. Analysis of the experimental primary product masses indicates dehydrogenation of ethene for all clusters save Nb10, yielding either Nb(n)C2H2 or Nb(n)C2. Over the range Nb-Nb6, the extent of dehydrogenation increases with cluster size, then decreases for larger clusters. For many clusters, secondary and tertiary product masses are also observed, showing varying degrees of dehydrogenation corresponding to net addition of C2H4, C2H2, or C2. With Nb atoms and several small clusters, formal addition of at least six ethene molecules is observed, suggesting a polymerization process may be active. Kinetic analysis of the Nb atom and several Nb(n) cluster reactions with ethene shows that the process is consistent with sequential addition of ethene units at rates corresponding approximately to the gas-kinetic collision frequency for several consecutive reacting ethene molecules. Some variation in the rate of ethene pick up is found, which likely reflects small energy barriers or steric constraints associated with individual mechanistic steps. Density functional calculations of structures of Nb clusters up to Nb(6), and the reaction products Nb(n)C2H2 and Nb(n)C2 (n = 1...6) are presented. Investigation of the thermochemistry for the dehydrogenation of ethene to form molecular hydrogen, for the Nb atom and clusters up to Nb6, demonstrates that the exergonicity of the formation of Nb(n)C2 species increases with cluster size over this range, which supports the proposal that the extent of dehydrogenation is determined primarily by thermodynamic constraints. Analysis of the structural variations present in the cluster species studied shows an increase in C-H bond lengths with cluster size that closely correlates with the increased thermodynamic drive to full dehydrogenation. This correlation strongly suggests that all steps in the reaction are barrierless, and that weakening of the C-H bonds is directly reflected in the thermodynamics of the overall dehydrogenation process. It is also demonstrated that reaction exergonicity in the initial partial dehydrogenation step must be carried through as excess internal energy into the second dehydrogenation step.     

Polymeric particulates to improve oral bioavailability of peptide drugs

Oral administration remains the most convenient way of delivering drugs. Recent advances in biotechnology have produced highly potent new molecules such as peptides, proteins and nucleic acids. Due to their sensitivity to chemical and enzymatic hydrolysis as well as a poor cellular uptake, their oral bioavailability remains very low. Despite sophisticated new delivery systems, the development of a satisfactory oral formulation remains a challenge. Among the possible strategies to improve the absorption of drugs, micro- and nanoparticles represent an exciting approach to enhance the uptake and transport of orally administered molecules. Increasing attention has been paid to their potential use as carriers for peptide drugs for oral administration. This article reviews the most common manufacturing methods for polymeric particles and the physiology of particle absorption from the gastrointestinal (GI) tract. In a second part, the use of polymeric particulate systems to improve the oral absorption of insulin is discussed.     

Model dipeptides incorporating the trans cyclohexane analogues of phenylalanine: further evidence of the relationship between side-chain orientation and β-turn type

In order to study the influence of the side-chain orientation on the peptide backbone conformation we have synthesised the model dipeptides t-BuCO-l-Pro-(1S,2R)-c₆Phe-NHMe and t-BuCO-l-Pro-(1R,2S)-c₆Phe-NHMe, incorporating each enantiomer of the trans cyclohexane analogue of phenylalanine (trans-1-amino-2-phenylcyclohexanecarboxylic acid). The orientation of the aromatic side-chain determines the β-turn type accommodated by these peptides to the point that the (1S,2R)-c₆Phe derivative retains the type I β-turn in the crystalline state, in contrast to the behaviour exhibited by the natural counterpart t-BuCO-l-Pro-l-Phe-NHMe.     

Thermal analysis of CuMg alloys deformed by equal channel angular pressing

Journal of Thermal Analysis and Calorimetry - The thermal behavior of two copper alloys, with 0.2 and 0.5 mass % of Mg, was analyzed after severe plastic deformation processing by Equal Channel...