Copper oxide nanocrystals

It is well-known that inorganic nanocrystals are a benchmark model for nanotechnology, given that the tunability of optical properties and the stabilization of specific phases are uniquely possible at the nanoscale. Copper (I) oxide (Cu(2)O) is a metal oxide semiconductor with promising applications in solar energy conversion and catalysis. To understand the Cu/Cu(2)O/CuO system at the nanoscale, we have developed a method for preparing highly uniform monodisperse nanocrystals of Cu(2)O. The procedure also serves to demonstrate our development of a generalized method for the synthesis of transition metal oxide nanocrystals. Cu nanocrystals are initially formed and subsequently oxidized to form highly crystalline Cu(2)O. The volume change during phase transformation can induce crystal twinning. Absorption in the visible region of the spectrum gave evidence for the presence of a thin, epitaxial layer of CuO, which is blue-shifted, and appears to increase in energy as a function of decreasing particle size. XPS confirmed the thin layer of CuO, calculated to have a thickness of approximately 5 A. We note that the copper (I) oxide phase is surprisingly well-stabilized at this length scale.     

A novel agarofuran sesquiterpene, celahin D from Celastrus hindsii Benth

A novel agarofuran sesquiterpene polyol ester, 1beta,2beta,6alpha,15beta-tetracetoxy-8 beta,9alpha-dibenzoyloxy-beta- dihydroagarofuran (celahin D) (1), two known analogues of 1,1beta-acetoxy-8beta,9alpha-dibenzoyloxy-4al pha6alpha-dihydroxy-2beta(alphamethylbutanoyloxy)-beta-++ +dihydroagarofuran (2) and beta-acetoxy-8beta,9alpha-dibenzoyloxy-6alpha-hy droxy-2beta(alpha -methylbutanoyloxy)-beta-dihydroagarofuran (3), and a known cytotoxic sesquiterpene pyridine alkaloid, emarginatine E (4) were isolated from the stems of Celastrus hindsii Benth. Three known triterpenes, loranthol (5), lupenone (6) and friedelinol (7) were also obtained from the titled plant. Structural elucidation of compound 1 was established by 2D NMR spectra.     

The growth of perylene on Ru(0001)

The structure of perylene adsorbed on Ru(0001) surface has been studied by ultraviolet photoemission spectroscopy (UPS) and low-energy electron diffraction. An ordered p(4x4) structure is observed from a monolayer (about 4 A thickness) of the perylene on Ru(0001) surface. UPS measurements show the molecular features, from the perylene multiplayer, between 2 and 10 eV below the Fermi level. Angle-resolved ultraviolet photoemission spectroscopy measurements suggest that the perylene molecular plane is parallel to the substrate. Temperature dependent UPS measurements show that the perylene multilayer is stable on Ru(0001) surface up to 125 degrees C. The desorption of the multilayer and the decomposition of the monolayer are observed above 125 degrees C.     

Visible light driven deuteration of formyl C–H and hydridic C(sp3)–H bonds in feedstock chemicals and pharmaceutical molecules

Deuterium labelled compounds are of significant importance in chemical mechanism investigations, mass spectrometric studies, diagnoses of drug metabolisms, and pharmaceutical discovery. Herein, we report an efficient hydrogen deuterium exchange reaction using deuterium oxide (D₂O) as the deuterium source, enabled by merging a tetra-n-butylammonium decatungstate (TBADT) hydrogen atom transfer photocatalyst and a thiol catalyst under light irradiation at 390 nm. This deuteration protocol is effective with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds (e.g. α-oxy, α-thioxy, α-amino, benzylic, and unactivated tertiary C(sp³)–H bonds). It has been successfully applied to the high incorporation of deuterium in 38 feedstock chemicals, 15 pharmaceutical compounds, and 6 drug precursors. Sequential deuteration between formyl C–H bonds of aldehydes and other activated hydridic C(sp³)–H bonds can be achieved in a selective manner.

A selective hydrogen deuterium exchange reaction with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds has been achieved by merging tetra-n-butylammonium decatungstate photocatalyst and a thiol catalyst under 390 nm light irradiation.     

Reactions of the Dirhenium(II) Complexes Re(2)X(4)(&mgr;-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) with Isocyanides. 11.(1) A Triply Bonded Dirhenium Complex Containing a Labile Acetonitrile Ligand. Synthesis, Structural Characterization, and Reactivity of [(XylNC)(CH(3)CN)ClRe(&mgr;-dppm)(2)ReCl(2)(CO)]O(3)SCF(3)

The reaction of the open bioctahedral form of Re(2)Cl(4)(&mgr;-dppm)(2)(CO)(CNXyl) (1), where XylNC = 2,6-dimethylphenyl isocyanide, with TlO(3)SCF(3) in the presence of acetonitrile proceeds with retention of stereochemistry at the dirhenium unit to afford the complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(NCCH(3))]O(3)SCF(3) (3). The single-crystal X-ray structure determination of 3 shows that a Re&tbd1;Re bond is retained (the Re-Re distance is 2.378(3) ?) and that it is the chloride ligand trans to the XylNC ligand of 1 which is labilized. Complex 1 reacts with TlO(3)SCF(3) in a noncoordinating solvent to produce the unsymmetrical complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)]O(3)SCF(3) (2), through loss of this same chloride ligand of 1 and CO transfer from the adjacent Re center. The acetonitrile ligand of 3 is very labile and is readily displaced by XylNC and t-BuNC, with retention of stereochemistry, to produce complexes of stoichiometry [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(CNR)]O(3)SCF(3) (R = Xyl, 4a; R = t-Bu, 4b). In a noncoordinating solvent, the nitrile ligand of 3 is lost and 2 is formed following CO transfer; this conversion is reversed upon the reaction of 2 with acetonitrile. When 3 is treated with CO, the acetonitrile ligand is again displaced, but in this instance the reaction is accompanied by a structure change to produce an edge-sharing bioctahedral complex of the type [Re(2)(&mgr;-CO)(&mgr;-Cl)(&mgr;-dppm)(2)Cl(2)(CO)(CNXyl)]O(3)SCF(3) (5).     

溶液中(RC2R')Co(CO)(PR″3)2的配体PR″3之间的交换作用——三跳动力学模型

本文成功地运用了三跳动力学模型,通过相关函数和超精细分裂常数的关系, 推出了电子自旋共振波谱的线宽与基本线宽T_(2,0)~(-1)、溶液中各种异构体的超精细分裂常数、配体的交换寿命等之间的关系。求出了在290 K温度下(Ph_2C_2)Co(CO)[P(OEt)_3]_2的THF溶渡中P(OEt)_3配体的交换寿命是5.6×10~(-11)秒。     

Separation of immunoglobulin G by high-performance pseudo-bioaffinity chromatography with immobilized histidine. I. Preliminary report on the influence of the silica support and the coupling mode.

High-performance liquid affinity chromatography with immobilized histidine as a pseudo-biospecific ligand has been used for the fractionation of human immunoglobulin G (IgG). Histidine was immobilized onto silica in two different modes: directly onto silica after epoxy activation or using an intermediate amino derivatization of silica and then coupling histidine using water-soluble carbodiimide. The behaviours and capacities of the obtained affinity supports as well as the influence of pH, silica type, pore diameter and coupling mode have been studied. IgG was effectively separated from human plasma and high maximal binding capacities were obtained.     

Application of capillary isoelectric focusing with universal concentration gradient detector to the analysis of protein samples.

The design of a new capillary isoelectric focusing (cIEF) instrument, composed of a rugged cartridge holding a short piece of capillary and a universal, inexpensive concentration gradient detector, was optimized and applied to the analysis of various protein samples. High-efficiency cIEF separations with sub-femtomole detection limits for absolute amounts were obtained using 10 microns I.D. capillaries with large O.D.-to-I.D. ratios. An electric field strength of 1 kV/cm applied in the focusing step resulted in a 10(-8) M on-column concentration detection limit, which corresponded to 10(2) amol absolute amount of proteins. The detection volume was estimated to be 2 pl, which is among the smallest values reported to date for any optical or spectroscopic detector. When a 6-cm long capillary was used, proteins with isoelectric points ranging from 4.7 to 8.8 could be analyzed in about 5 min, the shortest analysis time ever reported for cIEF. Compared with commercial cIEF instruments with UV-visible absorbance detectors, the instrument is easier to use and has lower detection limits and better resolution. Several protein mixtures and real samples were separated with this instrument.     

Reactions of d0 group 4 amides with dioxygen. Preparation of unusual oxo aminoxy complexes and theoretical studies of their formation

Reactions of d0 amides M(NMe2)4 (M = Zr, 1; Hf, 2) with O2 have been found to yield unusual trinuclear oxo aminoxide complexes M3(NMe2)6(mu-NMe2)3(mu3-O)(mu3-ONMe2) (M = Zr, 3; Hf, 4) in high yields. Tetramethylhydrazine Me2N-NMe2 was also observed in the reaction mixtures. Crystal structures of 3 and 4 have been determined. Density functional theory calculations have been performed to explore the mechanistic pathways in the reactions of model complexes Zr(NR2)4 (R = H, 5; Me, 1) and [Zr(NR2)4]2 (R = H, 5a; Me, 1a) with triplet O2. Monomeric and dimeric reaction pathways in the formation of the Zr complex 3 are proposed.