Microdetermination of hyaluronic acid in human urine by high performance liquid chromatography.

A high performance liquid chromatographic (HPLC) system is described for determination of the unsaturated disaccharide (delta Di-HA) derived from hyaluronic acid (HA) in human urine by digestion with hyaluronidase SD. The effects of eluents on the separation of delta Di-HA and delta Di-0S, which is derived from the reaction of chondroitin with the enzyme, have been studied. The established chromatographic conditions were as follows--column: a stainless steel tube (4 mm i.d. x 250 mm) packed with TSKgel NH2-60; eluent: a mixture of acetonitrile and 0.1 M Tris-HCl buffer containing 0.1 M boric acid and 10 mM sodium sulphate, pH 7.0 (64:36, v/v). The strong fluorescence of unsaturated disaccharide after the reaction with 2-cyanoacetamide in alkaline medium was used for post-column detection. The calibration curve for delta Di-HA was linear in the range 5 pmol-5nmol with a practical detection limit of 2 pmol. The assay coefficients of variation (n = 5) at 200 pmol for delta Di-HA and delta Di-0S were 1.7 and 1.5%, respectively. This HPLC system has been applied to the determination of HA in human urine.     

Three-dimensional trajectory study of the I + HI → IH + I, H + I2 reactions

The quasiclassical trajectory calculation of the I + HI collision is performed in order to study the exchange and endothermic reaction channels. The rate constant of the exchange reaction I′ + HI → HI′ + I is found to be equal to 7.7 × 10¹¹ cm³/mol s at room temperature of 300 K. The study of the endothermic reaction I + HI → H + I₂ shows that it takes place only in configurations with large bend angles. Due to the non-collinear character of this reaction its threshold (2 eV) exceeds significantly the threshold of the minimal energy (collinear) reaction path (1.55 eV).     

Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

The phase diagram of the lyotropic nematic mesophase in the TTAB/NaBr/water system

The phase diagram of the nematic mesophase present in the tetradecyltrimethylammonium bromide/sodium bromide/water ternary system was determined. A calamitic nematic mesophase (N_C) was observed which extends to very high concentrations of electrolyte. The order parameters of the surfactant head group in the mesophases were studied by the NMR quadrupolar splitting of the deuterated surfactant. On increasing the temperature of nematic mesophases with low electrolyte concentrations, a phase separation occurs with the formation of a more highly ordered hexagonal phase and an isotropic phase. Diffusion measurements of the isotropic micellar solution by the NMR PFG method were used to estimate hydrodynamic radii at low surfactant concentrations and to study micelle diffusion as the concentration of the surfactant was increased to the liquid crystalline region. At higher surfactant concentrations, the diffusion coefficient reached a limiting value. The calamitic nematic mesophase in this surfactant/electrolyte/water system appears to be formed by long wormlike micelles.     

A Miura of the Painlevé I Equation and Its Discrete Analogs

We present Miura transformations for the continuous and several discrete Painlev\'e I equations. In the case of the continuous P_I, we use the Hamiltonian formulation of the Painlev\'e equations and show that there exists a Miura transformation between P_I and the binomial, second degree, equation of Cosgrove SD_V. In the case of the discrete P_I's we obtain two different kinds of Miuras. One kind relates a d-P_I to some other d-P_I while the other leads to discrete four-point equations which are the discrete analogs of the derivative of Cosgrove's equation SD_V.     

MODELLING AND CONTROL WITH PIEZOACTUATORS FOR A SIMPLY SUPPORTED BEAM UNDER A MOVING MASS

In the paper, the dynamic modelling and control are presented for a simply supported beam under a moving mass. The equations of motion are obtained based on the Euler-Bernoulli beam theory by including the dynamic effect of a moving mass travelling along a vibrating path. The equations of motion are discretized by using the assumed modes method with the static deflection of the beam. In order to reduce the deflection of the beam under a moving mass, a controller with full state feedback is designed based on linearized equations of motion. Two piezoelectric actuators are bonded along the bottom of the beam at different locations determined by the minimization of an optimal cost functional. Numerical simulations are performed with respect to different constant velocities and different moving masses. The controller with two piezoelectric actuators shows excellent performance under unknown disturbances to the system.     

Equilibrium and kinetic surface segregation in binary alloy thin films

A general theoretical analysis of the effect of film thickness on equilibrium and kinetic surface segregation in binary alloy thin films is presented. In this analysis, a constrained condition that represents the finite size of thin film system has been introduced to the modified Darken model, which has been used to describe both equilibrium and kinetic surface segregation in bulk materials. Simulation of surface segregation for alloy thin films can be carried out for all composition ranges and all film thicknesses if only knowing the surface segregation parameters for bulk materials. Simulations of equilibrium and kinetic surface segregation in Cu(1 1 1)Ag binary alloy thin film are presented.