High-resolution Hadamard transform microscope fluorescence imaging: quantifying the DNA content in single cells

This study presents a novel miniaturized Hadamard transform fluorescence imaging microscope, by combining a conventional fluorescence microscope with Hadamard transform multiplexing encoding using a one-dimensional movable mask to realize spatial resolution and a linear CCD for multichannel detection. The microscope can provide high-resolution automatically-generated 0–255 gray level HT images for morphological analysis and visualization of a single cell, and normalized HT images for cellular quantitative measurements. The microscopes imaging capability was applied to measure the DNA content in human lymphocyte, chicken erythrocyte and eel erythrocyte, and a comparative study was performed. The results show that the calibrated DNA content in a chicken erythrocyte is 2.32 pg when human lymphocyte is used as the standard, and eel erythrocyte may be a potentially reliable and novel standard for determining DNA contents in other species because it has a stable DNA value of 2.06 pg, with a CV of 4.3% when 20 eel erythrocytes are measured. The results also demonstrate that the HT imaging microscope should be valuable in the fields of medicine and cell biology.     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Inclusion-dependent mechanism of modification of cyclodextrins with heterocycles

Mono(6-deoxy-dimethylpyridinium)-β-cyclodextrins have been synthesized in reaction of mono (p-toluenesulfonyl) derivative of β cyclodextrin with the appropriate lutidine under microwave irradiation and conventional conditions. The results indicate that the mechanism consists of inclusion complex formation.     

Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Synthesis of porphyrin-appended terpyridine as a chemosensor for cadmium based on fluorescent enhancement

The design and synthesis of a porphyrin-appended terpyridine, 5-(4-([2,2′:6′,2″]-terpyridin-4-yl-carboxyamidyl)phenyl)-10,15,20-triphenylporphyrin (H₂TPPTPy) and its application as potential fluoroionophore for recognition of metal ions are reported. For preparation of the fluoroionophore, a novel simple strategy with improved total yield has been applied for the synthesis of 2,2′:6′,2″-terpyridine-4′-carboxylic acid as a ligand. H₂TPPTPy shows chelation-enhanced fluorescence effect with cadmium ion via the interruption of photoinduced electron transfer (PET) process, which has been utilized as the basis of the fabrication of the Cd(II)-sensitive fluorescent chemosensor. The analytical performance characteristics of the proposed Cd(II)-sensitive chemosensor were investigated. It shows a linear response toward Cd(II) in the concentration range of 3.2 × 10⁻⁶ to 3.2 × 10⁻⁴ M with a limit of detection of 1.2 × 10⁻⁶ M. The chemosensor shows good selectivity for Cd(II) over a large number of cations, such as alkali, alkali earth and transitional metal ions except Cu(II) and Zn(II). The sensor has been used for determination of Cd(II) in water samples with satisfactory recoveries.     

Density Functional Theory and Low-Temperature Matrix Investigations of CO-Loss Photochemistry from [(C<Subscript>5</Subscript>R<Subscript>5</Subscript>)Ru(CO)<Subscript>2</Subscript>]<Subscript>2</Subscript> (R = H,Me) Complexes

The photochemical CO-loss products of the diruthenium complexes [CpRu(CO) ₂]₂ (5; Cp = ⁵-C₅H₅), [Cp*Ru(CO)₂]₂ (5*; Cp* = ⁵-C₅(CH₃)₅) and CpCp*[Ru(CO)₂]₂ (5) have been studied experimentally in low-temperature (96 K) matrices in 3-methylpentane by using IR spectroscopy. It is proposed that all three complexes undergo single-CO-loss chemistry but that the products have different structures. The single-CO-loss product from 5 is proposed to have one bridging and two terminal carbonyl ligands, whereas 5* and 5 generate triply bridged CO-loss products similar to that observed from [CpFe(CO)₂]₂ and [Cp*Fe(CO)₂]₂. Double-CO-loss from 5* and 5* 9 is also apparently observed. Relativistic DFT calculations have been carried out on various isomers of the starting materials and on potential CO-loss products from 5. The calculations suggest that the triply bridged product Cp₂Ru₂(-CO)₃ (6) might have a singlet ground state in contrast to the corresponding diiron complex Cp₂Fe₂(-CO)₃ (3), which has a triplet ground state.