氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

The pH-dependent role of superoxide in riboflavin-catalyzed photooxidation of 8-oxo-7,8-dihydroguanosine

[reaction: see text]. The riboflavin-catalyzed photooxidation of 2',3',5'-tri-O-acetyl-8-oxo-7,8-dihydroguanosine generates a radical intermediate that is competitively trapped by H(2)O, O2(-)(*), or O(2). The products of H(2)O trapping have been previously described as the spiroiminodihydantoin (pH >or= 7) and iminoallantoin/guanidinohydantoin (pH < 7) nucleosides. Trapping by O2(-)(*) leads to the oxaluric acid (pH or= 8.6) pathways (R' ', R' ' = H or 2,3,5-tri-O-Ac-ribofuranosyl). The pH-dependent role of superoxide was probed using Mn-SOD and compared to guanosine and 8-methoxyguanosine photooxidation.     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

Resolution method for overlapping peaks based on the fractional-order differential

Equations between the differential order and the maximum of the fractional-order differential for the specified peak signals are developed based on the variation of the maximum of the specified peak signals at different orders. Also, equations between the differential order and the zero-crossing of the fractional-order differential of the specified peak signals are proposed according to the variation of the zero-crossing of the specified peak signals at different orders. Characteristic paramters of the Gaus- sian peak, Lorentzian peak, and Tsallis peak can be estimated using estimator I and estimator II which are obtained by the equations above. As a result, a new method is presented to resolve the overlapped peaks signal. Firstly, a fractional-order differential of the specified peak signals is obtained with the fractional-order differentiation filter. Then, characteristic paramters of the specified peak signals can be extracted using estimator I and estimator II. Finally, the Tsallis peak is used as a model to assign the overlapping peak signals correctly. Experimental results show that the proposed method is efficient and effective for the simulated overlapping peaks and detected overlapping voltammetric peak signals.     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>][1,2,4]triazines

Summary.  A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.