Effect of nanocrystalline cellulose on the curing characteristics and aging resistance properties of carbon black reinforced natural rubber

This work focused on the effect of nanocrystalline cellulose (NCC) on the curing characteristics, aging resistance and thermal stability of natural rubber (NR) reinforced with carbon black (CB). Sharing the same fillers loading of 45 parts per hundred rubber (phr), NR/NCC/CB composites with different NCC/CB ratios (i.e. 0/45, 5/40, 10/35, 15/30, 20/25 phr) were prepared and analyzed. Resorcinol and hexamethylene tetramine (RH), acting as the modifier in NR/NCC interface, was also discussed for its influence. The result showed that an relatively higher ratio of NCC/CB led to a lower torque, a shorter cure time (T ₉₀), a slightly longer scorch time (T ₁₀) and a bigger vulcanization rate constant (K). This tendency suggested that the existence of NCC accelerated the vulcanization process. Additionally, modified by RH, NR/NCC/CB compounds exhibited a short T ₁₀ and a elevated torque. And a moderate RH content would lower the E _a of vulcanization. A 10 phr substitute of CB by NCC can help to improve aging resistance in terms of mechanical properties. In a high temperature aging condition, composites with 10 phr NCC also performed the highest storage modulus (G′) among composites tested. A moderate NCC content contributed to the best retention of G′ after high temperature aging, so did the incorporation of RH. With the partial replacement of CB by NCC, the temperature of 5% weight-lose had a slight drop and the apparent crosslink density showed a decrease. Thanks to the interaction of RH with both NR and NCC, composites showed an improvement in apparent crosslink density after modified by RH.     

Crosslinked organosiloxane hybrid materials prepared by condensation of silanol and modified silica: Synthesis and characterization

Hybrid materials based on polymethylphenylsiloxane (PMPS) and organic functionalized silica were synthesized via condensation reaction between silanol and alkoxysilyl groups in the presence of quaternary ammonium hydroxide. The structure of prepared materials was investigated by FTIR and NMR, which indicate that the products have incorporated modified silica into the polymer matrix. The prepared hybrid materials show a satisfactory thermal resistance because the initial decomposition of typical product occurred at nearly 100 K higher than that of the pure polymer according to the thermogravimetric analysis (TGA) results. Differential thermogravimetric analysis (DTGA) data confirm that the thermal degradation of prepared hybrid materials comprises of two steps, of which the first one could be controlled by adjusting the content of silica particles and the ratio of surface groups on the particles. The coating films obtained from hybrid products exhibit good thermal mechanical properties. Therefore, the materials are hoped to be used for the application in thermal resistant coating.     

An algorithm for overlapped chromatogram separation

Non-negative matrix factorization (NMF) is a recently developed method for real time data analysis. In the past it has been used for facial recognition and spectral data analysis. Most of the NMF algorithms do not converge to a stable limit point and uniqueness in results is also a problem in NMF. To improve the convergence, a new NMF algorithm with modified multiplicative update (ML-NMFmse) has been proposed in this work for strongly overlapped and embedded chromatograms separation. To get same results for all the runs, instead of random initialization, three different initialization methods have been used namely, ALS–NMF (robust initialization), NNDSVD based initialization and EFA based initializations. The proposed ML-NMFmse algorithm is applied on the simulated and experimental overlapped chromatograms obtained for acetone and acrolein mixture, using Gas Chromatography–Flame Ionization Detector. Before applying NMF, Principal Component Analysis (PCA) was applied to determine number of components in the mixture taken. The result of proposed ML-NMFmse is compared with that of existing Multivariate Curve Resolution-Alternating Least Squares method in optimal conditions for both the algorithms. In the case of embedded chromatogram, the proposed ML-NMFmse with Robust method (ALS-NMF) of initialization performs better than all other methods. For a resolution of severely overlapped chromatograms, the proposed ML-NMFmse with NNDSVD method of initialization outperforms all other methods.     

Synthesis and characterisation of 3-armed dendritic molecules with triphenylbenzene or triphenyltriazine as core and triphenylene derivative as shells

Two series 3-armed dendritic molecules with their 1,3,5-tris(4-methyloxyphenyl) benzene or 2,4,6-tris(4- hydroxylphenyl)-1,3,5-s-triazine core and triphenylene derivative shells connected by soft hydrocarbon chains have been synthesised and fully characterised. Whether liquid crystal (LC) or photoluminescence materials have been tuned by changing the length of the soft chain and they have been studied by POM, DSC, XRD, UV-Vis and PL. The results show that all the new dendritic compounds display UV to blue fluorescence in solvents such as DCM, THF and acetone. The TC3 compound bearing 1,3,5-tris(4-hydroxylphenyl) benzene core exhibits LC property with rectangular columnar phase (Col_r) on cooling.     

Surface Performance and Cytocompatibility Evaluation of Acrylic Acid-Mediated Carboxymethyl Chitosan Coating on Poly(tetrafluoroethylene-co-hexafluoropropylene)

To improve the biocompatibility of poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) film, a technique based on Ar plasma pretreatment and UV-induced grafting polymerization was used to immobilize carboxymethyl chitosan (CMCS) on the FEP film surfaces. Initially Ar plasma was used to treat FEP film. Then, plasma treated FEP film was modified via UV-induced grafting polymerization with hydrophilic acrylic acid (AAc) monomer. The following immobilization of CMCS on the FEP-pAAc surface was carried out via an amidation reaction. The change of chemical composition and surface morphology of FEP film were characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM) and atomic force microscopy (AFM). Results of water contact angles measurement showed that the hydrophilicity of the surface has improved significantly after surface modification. Furthermore, methyl thiazolyl tetrazolium (MTT) assay and cell morphology analysis confirmed that mouse fibroblasts (L929 cells) attachment and proliferation were improved remarkably on the modified FEP surface. These results suggest that CMCS were successfully employed to surface engineering FEP film, and enhanced its cell biocompatibility. The approach presented here may be exploited for surface modification of biomaterials.     

Dispersive liquid–liquid microextraction followed by high-performance liquid chromatography for the determination of three carbamate pesticides in water samples

A simple, rapid and efficient method, dispersive liquid–liquid microextraction (DLLME) in conjunction with high-performance liquid chromatography (HPLC), has been developed for the determination of three carbamate pesticides (methomyl, carbofuran and carbaryl) in water samples. In this extraction process, a mixture of 35 µL chlorobenzene (extraction solvent) and 1.0 mL acetonitrile (disperser solvent) was rapidly injected into the 5.0 mL aqueous sample containing the analytes. After centrifuging (5 min at 4000 rpm), the fine droplets of chlorobenzene were sedimented in the bottom of the conical test tube. Sedimented phase (20 µL) was injected into the HPLC for analysis. Some important parameters, such as kind and volume of extraction and disperser solvent, extraction time and salt addition were investigated and optimised. Under the optimum extraction condition, the enrichment factors and extraction recoveries ranged from 148% to 189% and 74.2% to 94.4%, respectively. The methods yielded a linear range in the concentration from 1 to 1000 µg L^?1 for carbofuran and carbaryl, 5 to 1000 µg L^?1 for methomyl, and the limits of detection were 0.5, 0.9 and 0.1 µg L^?1, respectively. The relative standard deviations (RSD) for the extraction of 500 µg L^?1 carbamate pesticides were in the range of 1.8–4.6% (n = 6). This method could be successfully applied for the determination of carbamate pesticides in tap water, river water and rain water.     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.     

The ring-opening of chiral oxazoline involving pyrrolidone

Chiral N-[1-benzyl-2-hydroxyethyl]-3-[2-oxo-pyrrole]propionamide (C₁₆H₂₂N₂O₃) was obtained unexpectedly from the reaction of oxazoline involving pyrrolidone with copper acetate monohydrate, and the structure was characterized by NMR, IR, elemental analysis, and X-ray analysis.     

Synthesis and characterization of biphenyl liquid crystal based on natural molecules and 2(5H)-furanone moiety

Using 4′-hexyloxybiphenyl-4-ol and N-(5-alkoxy-3-bromo-2(5H)-furanonyl) amino acids as reactants, a series of novel biphenyl liquid crystal compounds containing natural molecule moieties, such as menthol, borneol, and amino acids, were synthesized via esterification. The structures of all novel compounds were confirmed by FTIR, ¹H NMR, ¹³C NMR, MS, and elemental analysis, and the liquid crystal properties of target compounds were characterized with DSC, XRD, and POM. The introduction of hexyloxy made the biphenyl esters have a potential to appear in mesomorphic phase and have a higher Tm, and bornyl moiety was more beneficial for the liquid crystal performance than a menthyl unit. Most compounds were mesomorphic phase liquid crystal molecules, and POM and XRD showed that they existed in smectic phase. These researches provide a theoretical basis for the synthesis of biphenyl ester liquid crystal materials via the utilization of 2(5H)-furanone derivates and natural molecules.     

Polarization-controlled leakage current and photovoltaic effect in highly preferentially oriented BiFeO3 film

Highly preferentially oriented polycrystalline BiFeO₃ thin film was grown on FTO/glass substrate by a sol–gel method annealed at 500 °C. XRD result showed that the film adopts highly (100) preferential orientation. SEM results indicate that the film is composed of large grains of 40–200 nm and the thickness is about 320 nm. Room temperature saturated polarization and large Pr ~55 μC/cm² were obtained. Leakage current was substantially reduced by the controlling of ferroelectric polarization. Polarization-modulated conduction mechanism was studied. Moreover, substantial photovoltaic effect was observed.