Adhesion measurement of thin films by a modified laser spallation technique: theoretical analysis and experimental investigation

Laser driven shocks can lead to a dynamic failure, called film spallation. Here, we use a modified laser spallation set-up to measure the dynamic adhesion of thin films and we propose a novel diagnostic technology. Based on correlation theory, new spallation criteria for characterizing the progressive damage at the interface between the film and the substrate are established, such as interface delamination, film spallation and film expulsion. With the help of the theory, the degree of damage and the dimension of damage (i.e. fracture), such as the minimum width of delamination radius, the thickness of the film etc., are estimated. Experiments are carried out on epoxy/stainless steel and epoxy/Al, and the experimental results show that their dynamic bonding strengths are about 25 MPa and 20 MPa, respectively. The detailed results, analyses and discussions are presented in this paper. Received: 6 February 2001 / Accepted: 3 December 2001 / Published online: 11 February 2002     

Controlling global stochasticity of Hamiltonian systems by nonlinear perturbation

A method of controlling global stochasticity in Hamiltonian systems by applying nonlinear perturbation is proposed. With the well-known standard map we demonstrate that this control method can convert global stochasticity into regular motion in a wide chaotic region for arbitrary initial condition, in which the control signal remains very weak after a few kicks. The system in which chaos has been controlled approximates to the original Hamiltonian system, and this approach appears robust against small external noise. The mechanism underlying this high control efficiency is intuitively explained. Received 15 January 2002 Published online 6 June 2002     

Isoelectric focusing sample injection for capillary zone electrophoresis in a fused silica capillary.

An improvement has been made to couple isoelectric focusing (IEF) sample injection and capillary zone electrophoresis in an untreated fused silica capillary. Electroosmotic flow is efficiently prevented by simply using a rubber block at the outlet end of the capillary during IEF sample injection. The experimental conditions that affect the concentration effect are discussed. A concentration enhancement factor of over 100-fold can be easily obtained for two model proteins: lysozyme and ribonuclease A.     

A Characterization of Graphs without Even Factors

In this paper, we first reduce the problem of finding a minimum parity (g,f)-factor of a graph G into the problem of finding a minimum perfect matching in a weighted simple graph G*. Using the structure of G*, a necessary and sufficient condition for the existence of an even factor is derived. This paper was accomplished while the second author was visiting the Center for Combinatorics, Nankai University. The research is supported by NSFC     

Analysis of a type of nonsmooth dynamical systems

In this paper, a class of nonsmooth dynamical systems is analyzed. Extensive simulations reveal the chaotic behavior in these systems. By introducing a parameter, a chain of systems with one end being a linear stable system and the other being a chaotic system is constructed. Then the phase transition process through the chain is investigated as the parameter varies. Difficulties involved in analyzing this class of systems are also discussed.     

Determination of ultra-trace gold in natural water by graphite furnace atomic absorption spectrophotometry after in situ enrichment with thiol cotton fiber

A simple method of determining ultra-trace Au in natural water was presented by using graphite furnace atomic absorption spectrophotometry (GFAAS) after in situ enrichment with thiol cotton fiber (TCF). The sample solution was adjusted to pH 1.5-2.0 with HCl, then the water sample was passed through a column packed with 0.10-0.20 g TCF and the flow rate was controlled at 20-40 ml min⁻¹. The effects of interferences, such as complexing and oxidizing agents and other elements adsorbed on TCF were overcome by chemical treatments prior to the desorption of Au. The adsorbed Au was adsorbed with 2.0 ml hot acid, then it was extracted with 1.00 ml methyl isobutylketone (MIBK). For a 5 l water sample, the detection limit of Au is 0.02 ng l⁻¹. The relative standard deviation (R.S.D.) for the determination of 1.44 ng l⁻¹ Au was 9.4%.The method was applied to determine ultra-trace Au both in suspended phase and soluble phase in natural water, the concentrations of total Au in natural water samples range from 0.51 to 67.82 ng l⁻¹. The recovery of added 0.50-6.00 ng l⁻¹ Au was 80-95%. The method is useful in prospecting for Au deposits by means of hydrogeochemical methods. The enrichment is carried out in the field, and then the determination of Au is completed later in the laboratory.     

The Tolerance of All-Optical Switching Based on Cascaded Second-Order Nonlinearity in PPLN APE Waveguide

Based on solving the couple mode equation numerically, the characterization of the signal power on the gate power was analyzed. And the relationship of the tolerance of the grating period and the bulk temperature on the interaction length was analyzed.     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

On separation of gradient Young measures

Let be a linear subspace of real matrices without rank-one matrices and let be a finite set. Suppose is a bounded arcwise connected Lipschitz domain and is a sequence of bounded vector-valued mappings in such that in as , where is the closed -neighbourhood and the distance function to . We give estimates for such that up to a subsequence, in for some fixed . In other words, we give estimates on such that separates gradient Young measure. The two point set with is a special case of such sets up to a translation. Received: 20 July 2001 / Accepted: 23 January 2002 / Published online: 5 September 2002