Thermodynamic simulation of performance of a dual cycle with stroke length and volumetric efficiency

This article presents finite-time thermodynamics analysis of an irreversible air standard dual cycle. An irreversible dual cycle model which is more close to practice is established. In this model, the effects of stroke length and volume efficiency by considering the nonlinear relation between the specific heats of working fluid and its temperature, the frictional loss, the internal irreversibility, and heat transfer loss are analyzed. The results show that if compression ratio is less than certain value, the power output increases with increasing stroke length, while if compression ratio exceeds certain value, the power output first increases and then starts to decrease with increasing stroke length. With further increase in compression ratio, the increase of stroke length results in decreasing the power output. The results also show that, throughout the compression ratio range, the power output increases with the increasing volumetric efficiency. The results obtained in this study are of importance to provide good guidance for performance evaluation and improvement of practical internal combustion engines.     

SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation:Pore structure-dependent deactivation mechanism

In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were characterized by SEM,NH3-TPD and N2adsorption-desorption isotherms to indicate their intrinsic characteristics.Furthermore,in order to understand the mechanism of deactivation,the resulted green oil was characterized using FTIR and SIM DIS.FTIR results confirmed the presence of more unsaturated constituents and then,more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO,which in turn,could block the pores mouths.Besides the limited hydrogen transfer,N2 adsorption-desorption isotherms results supported that the lowest pore diameters of Al2O3/SMFs close to the surface led to fast deactivation,compared with the other catalysts,especially at higher temperatures.     

Calculation of Density for Mixtures of Carbon Dioxide with Nitrogen and Methane from the ISM Equation of State

In this paper the analytical equation of state (EoS) proposed by Ihm‐Song‐Mason was applied to calculate molar volume of mixtures of carbon dioxide with nitrogen and methane. The pair interaction potential has been used to evaluate the second virial coefficients and the ISM EoS parameters (i.e. α and b). The calculated values of the aforesaid quantities were applied to predict the molar volumes for mixtures of carbon dioxide with nitrogen and methane. Agreement with experiment was excellent for both mixtures.     

Synthesis and Characterization of Organosoluble Poly(imide-ether)s with Bulky 2,3-Diaryl Imidazole Moiety: Study Physical,Thermal and Optical Properties

Two new symmetrical diamines were designed and synthesized having different functional groups such as a pair of phenyl ether linkages, 2,3-diaryl substituted imidazole rings and CF₃ groups as pendant, and characterized by FT-IR, ¹H and ¹³C-NMR spectroscopy and elemental analysis. A series of new fluorescent poly(imide-ether)s (PIEs) was prepared by polymerization of the diamines with commercial tetracarboxylic dianhydrides such as pyromellitic dianhydride and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride. The resulting PIEs were amorphous and had intrinsic viscosity [η] in the range of 0.42–0.51 dL/g. The weight average molecular weights (Mw) of these polymers were measured by GPC and were in the range of 28658–35595 g/mol with molecular weight distribution (MWD) of 2.12–2.27. These polymers were readily soluble in a variety of organic solvents and formed low-colored and flexible thin films with cut-off wavelength (λ₀) in the range of 385–420 nm, and all PIEs films exhibited high optical transparency. They also possessed good thermal stability with 10% weight loss temperatures (T_10%) in the range 486–537°C in N₂. The glass transition temperatures (T_g) of PIEs are in the range 251–324°C. These polymers showed fluorescence emission in film and in solution at 459–476 nm with the quantum yields in the range 4–12%.     

Synthesis of 2-arylbenzimidazoles catalyzed by transition metal nitrates

A simple and practical procedure for synthesis of 2-arylbenzimidazoles by a one-pot condensation of o-phenylenediamine with aromatic aldehydes in the presence of a catalytic amount of M(NO₃)₂·6H₂O (M = Mn, Fe, Co, Ni, Cu) in ethanol at room temperature is described. Major advantages of this practical procedure are use of a readily available catalyst, high yields, short reaction times, and simplicity of the reaction and workup.     

“Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization

Aerogel/polystyrene nanocomposites with mixed free and aerogel-attached polystyrene chains were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. 3-methacryloxypropyldimethylchlorosilane containing a double bond, which could be incorporated into polystyrene chains by a “grafting through” approach, was used as an aerogel modifier. Kinetics of RAFT polymerization of styrene in the presence of modified silica aerogel was studied by monitoring conversion and molar mass values. To further study, attached polymers were detached and their molecular characteristics were compared to free chains. According to results, the presence of silica aerogel particles has a sensible influence on polymerization kinetic and more aerogels result in decreased polymerization rate and conversion. The dispersity (Ð) of polymer chains increased by the addition of silica aerogel. In the case of aerogel-attached polystyrene chains, number-averaged molar mass values were slightly lower than that of free chains. Also, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to observe the effect of loading on thermal properties of synthesized nanocomposites.     

One-step synthesis of agarose coated magnetic nanoparticles and their application in the solid phase extraction of Pd(II) using a new magnetic field agitation device

A magnetic solid phase extraction method based on agarose coated magnetic nanoparticles)ACMNPs(coupled to a new magnetic field agitation (MFA) device was developed and investigated for the separation, preconcentration and determination of Pd(II) in aqueous solutions. For the first time, the formation of the nanoparticles and their encapsulation in agarose micro-flakes was conducted in a single step. For this purpose, preparation of the magnetic iron oxide nanoparticles was performed in an alkaline agarose solution. The sizes of Fe₃O₄ nanoparticles and agarose micro-flakes were 10–14 nm and 90–130 μm, respectively. The nanomagnetic agarose particles were functionalized by iminodiacetic acid and subjected to magnetic field agitation in the MFA device. The influence of different analytical parameters such as pH, ionic strength, type and volume of desorption solvent and amount of the adsorbent on the preconcentration of Pd(II) were investigated. Eight replicated analysis at the optimized conditions, resulted in a recovery of 94.1% with an RSD of 5.2% for Pd(II). The detection limit of the method (3σ) was 47 ng L⁻¹ for the analyte. The method was successfully applied to the determination of Pd(II) in natural water samples.     

Highly Regioselective Ring Opening of Epoxides with Thiols Catalyzed by SbCl3 Under Solvent-Free Conditions

The ring-opening reaction of epoxides with thiols by SbCl ₃ supported on Kieselguhr under solvent-free conditions, afforded high yields of β-hydroxy sulfides. Nucleophilic attack of the thiols occurs regioselectively at the less hindered side of the epoxides.     

Synthesis,characterisation and supramolecular interaction of Rh-biphenylic-imidazole-phenanthroline with antibiotics

A novel rhodium biphenylic imidazole phenanthroline metal-organic complex (BIP-MC) has been synthesised and characterised as a stable supramolecule. The structure of compound was established on the basis ESI, ¹H NMR and UV–vis spectroscopic data. The selectivity of BIP-MC as a new fluorescent chemosensor for various antibiotics has been explored. The supramolecular interaction of amoxicillin with BIP-MC enhanced the fluorescence activity of BIP-MC. A linear response of the sensor was observed in the measuring ranges of excitation 240–298 nm and emission 290–360 nm with detection limits of up to 10 μg/ml at an optimum pH 8.0. Based on the observations made here, a new quantitative method for the determination of this drug in synthetic samples without the use of separation of matrix is developed. It is also inferred that the possible fluorescence enhancement is due to the formation of exciplex between the BIP-MC and amoxicillin. These finding will thus help in pharmacokinetics studies of drugs. The sensor was used for the direct assay of amoxicillin antibiotic in commercial pharmaceutical preparations.