Characterization of a Neutral and Thermostable Glucoamylase from the Thermophilic Mold Thermomucor indicae-seudaticae: Activity, Stability, and Structural Correlation

Glucoamylase from the thermophilic mold Thermomucor indicae-seudaticae was purified by anion exchange and gel filtration chromatographic techniques using a fast protein liquid chromatographic system. The structure and thermal stability of this unique ‘thermostable and neutral glucoamylase’ were analyzed by circular dichroism (CD). T. indicae-seudaticae glucoamylase (TGA) contained typical aromatic amino acid (tryptophan/tyrosine) fingerprints in its tertiary structure. Analysis of the far-UV CD spectrum at pH 7.0 and 25 °C revealed the presence of 45% α-helix, 43% β-sheet, and 12% remaining structures. The α-helix content was highest at pH 7.0, where glucoamylase is optimally active. This observation points towards the possible (α/α)₆ barrel catalytic domain in TGA, as reported in microbial glucoamylases. Thermal denaturation curves of the pure protein at different pH values revealed maximum stability at pH 7.0, where no change in the secondary structure was observed upon heating in the temperature range between 20 °C and 60 °C. The observed midpoint of thermal denaturation (T _m) of glucoamylase at pH 7.0 was 67.1 °C, which decreased on either sides of this pH. Thermostability of TGA enhanced in the presence of starch (0.1%) as no transition curve was obtained in the temperature range between 20 °C and 85 °C. The only product of TGA action on starch was glucose, and it did not exhibit transglycosylation activity even at 40% glucose that can also be considered as an advantage during starch saccharification.     

Fluorescent detection of phosphate anion by a highly selective chemosensor in water

A macrocyclic dinuclear copper complex, [Cu₂^II(1)Br₄]·2H₂O has been synthesized and characterized by X-ray crystallography, in which each metal ion is pentacoordinated in a square pyramidal environment and the macrocycle is folded to form a boat-shaped empty cavity. As studied by an indicator displacement assay, the dinuclear complex shows strong selectivity for phosphate over sulfate, nitrate, perchlorate and halides in water at physiological pH.     

Gd-complexes of macrocyclic DTPA conjugates of 1,1'-bis(amino)ferrocenes as high relaxivity MRI blood-pool contrast agents (BPCAs)

We report the synthesis of macrocyclic DTPA conjugates of 1,1'-bis(amino)ferrocenes (1a-b) and their Gd-complexes [Gd(L)(H(2)O)] (2a-b, L = 1a-b) for use as new MRI blood-pool contrast agents. High R(1) relaxivity in HSA as well as high thermodynamic and kinetic stabilities is observed for 2a.     

Computational studies on the interactions among redox couples, additives and TiO2: implications for dye-sensitized solar cells

One of the major and unique components of dye-sensitized solar cells (DSSC) is the iodide/triiodide redox couple. Periodic density-functional calculations have been carried out to study the interactions among three different components of the DSSC, i.e. the redox shuttle, the TiO(2) semiconductor surface, and nitrogen containing additives, with a focus on the implications for the performance of the DSSC. Iodide and bromide with alkali metal cations as counter ions are strongly adsorbed on the TiO(2) surface. Small additive molecules also strongly interact with TiO(2). Both interactions induce a negative shift of the Fermi energy of TiO(2). The negative shift of the Fermi energy is related to the performance of the cell by increasing the open voltage of the cell and retarding the injection dynamics (decreasing the short circuit current). Additive molecules, however, have relatively weaker interaction with iodide and triiodide.     

Distinct difference in ionic transport behavior in polymer electrolytes depending on the matrix polymers and incorporated salts

Two different electrolyte salts, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and a room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMITFSI), were incorporated into network polymers to obtain ion-conductive polymer electrolytes. Network polymers of poly(ethylene oxide-co-propylene oxide) (P(EO/PO)) and poly(methyl methacrylate) (PMMA) were chosen as matrixes for LiTFSI and EMITFSI, respectively. Both of the polymer electrolytes were single-phase materials and were completely amorphous. Ionic conductivity of the polymer electrolytes was measured over a wide temperature range, with the lowest temperatures close to or below the glass transition temperatures (Tg). The Arrhenius plots of the conductivity for both of the systems exhibited positively curved profiles and could be well fit to the Vogel-Tamman-Fulcher (VTF) equation. The conductivity of the PMMA/EMITFSI electrolytes was higher at most by 3 orders of magnitude than that of the LiTFSI/P(EO/ PO) electrolytes at ambient temperature. When the ideal glass transition temperature, T0 (one of the VTF fitting parameters), was compared with the Tg, a difference in the ionic conduction was apparent in these systems. In the P(EO/PO)/LiTFSI electrolytes, the T0 and Tg increased in parallel with salt concentration and the T0 was lower than the Tg by ca. 50 degrees C. On the contrary, the difference between the T0 and the Tg increased with increasing content of PMMA in the PMMA/EMITFSI electrolytes, with the observed difference in the concentration range studied reaching up to ca. 100 degrees C. The conductivity at the Tg, sigma(Tg), for the LiTFSI/P(EO/PO) electrolytes was on the order of 10(-14-)10(-13) S cm(-1) and increased with increasing salt concentration, whereas that for the PMMA/EMITFSI polymer electrolytes reached 10(-7) S cm(-1) when the concentration of PMMA was high. The ion transport mechanism was discussed in terms of the concepts of coupling/decoupling and strong/fragile for the two different polymer electrolytes.     

Rapid speciation analysis of Cr(VI) and Cr(III) by reversed-phase high-performance liquid chromatography with UV detection

A simple and rapid method is developed for the simultaneous determination of Cr(VI) and Cr(III) based on the formation of their different complexes with ammonium pyrrolidine-dithiocarbamate (APDC). Separation is performed using reversed-phase high-performance liquid chromatography coupled with UV detection. The conditions for complex formation and speciation are determined, such as solution pH, amount of APDC, temperature, and type of mobile phase. In order to substantially reduce the analysis time, the separation is carried out without extraction of chromium-APDC complexes from the mother liquor. Under the optimum analysis conditions, the chromatograms obtained show good peak separation, and the absolute detection limits (3s) are 2.2 microg/L for Cr(VI) and 4.5 microg/L for Cr(III). The calibration curves are linear from 3 to 5000 microg/L for Cr(VI) and 5 to 3000 microg/L for Cr(III). The relative standard deviations of peak areas in five measurements using a sample solution of 200 microg/L are less than 2% for Cr(VI) and 4% for Cr(III), indicating good reproducibility for this analytical method. Furthermore, simultaneous determination of Cr(VI) and Cr(III) is successful with the application of the proposed procedure in the synthetic wastewaters containing common heavy metal ions: Fe(III), Pb(II), Cd(II), Cu(II), and Zn(II).     

Controlled fabrication of 1D molecular lines across the dimer rows on the Si(100)-(2 x 1)-H surface through the radical chain reaction

Current interest in the fabrication of organic nanostructures on silicon surface is focused on the self-directed growth of 1D molecular lines with predefined position, structure, composition, and the length on the H-terminated Si(100)-(2 x 1) surface. To date, no studies have succeeded in growing the molecular line across the dimer rows on Si(100)-(2 x 1)-H, which is highly desirable. Using scanning tunneling microscopy (STM), we studied a new molecular system (allyl mercaptan, CH2=CH-CH2-SH) that undergoes chain reaction across the dimer row on the Si(100)-(2 x 1)-H surface at 300 K and produces covalently bonded 1D molecular lines. In combination with the previous findings of chain reaction along the rows, the present observations of self-directed growth of 1D molecular lines across the dimer rows on the Si(100)-(2 x 1)-H surface provide a means to connect any two points (through molecular lines) on a 2D surface.     

Pyridine-2-olato chelated ruthenium(II) organometallics incorporating imine-phenol function: spectroscopic,structural, electrochemical,and theoretical studies

The heterogeneous phase reaction of excess sodium salt of 2-hydroxypyridine (OHpy) with [Ru(κ²C,O-RL)(PPh₃)₂(CO)Cl] (1) afforded complexes of the type [Ru(κ¹C-RL)(PPh₃)₂(CO)(Opy)] (2) in excellent yield [κ²C,O-RL is 4-methyl-6-((N-R-arylimino)methyl)phenolato-C²,O), κ¹C-RL is 4-methyl-6-((N-R-arylimino)methyl)phenol-C²) and R is H, Me, OMe, Cl]. The chelation of Opy is attended with the cleavage of Ru-O and Ru-Cl bonds and iminium-phenolato → imine-phenol prototropic shift. The 1→2 conversion is irreversible and the type 2 species are thermodynamically more stable than the acetate, nitrite, and nitrate complexes of 1. The spectral (UV-vis, IR, NMR) and electrochemical data of the complexes are reported. In dichloromethane solution the complexes display one quasi-reversible Ru^III/Ru^II cyclic voltammetric response with E_1/2 in the range 0.65–0.69 V versus Ag/AgCl. The crystal and molecular structures of [Ru(κ¹C-HL)(PPh₃)₂(CO)(Opy)]·2C₆H₆·0.5H₂O, 2(H)·2C₆H₆·0.5H₂O and [Ru(κ¹C-ClL)(PPh₃)₂(CO)(Opy)]·2C₆H₆·0.25H₂O, 2(Cl)·2C₆H₆·0.25H₂O are reported, which revealed a distorted octahedral RuC₂P₂NO coordination sphere. The pairs (P,P), (C,O), and (C,N) define the three trans directions. The electronic structures of the complexes are also scrutinized by density functional theory.     

Green synthesis of nickel oxide particles and its integration into polyurethane scaffold matrix ornamented with groundnut oil for bone tissue engineering

Physiochemical properties of the fabricated scaffolds play a crucial role in influencing the cellular response for the new tissue growth. In this study, electrospun polyurethane (PU) scaffolds incorporated with green synthesized nickel oxide nanoparticles and groundnut oil (GO) were fabricated using electrospinning technique. First, synthesis of nickel oxide (NiO) was done using leaf extract of Plectranthus amboinicus (PA) via microwave-assisted technique. Synthesized nanoparticles were confirmed through Energy-dispersive X-ray spectroscopy (EDX) analysis and size of the particles were in the range of 800–950?nm. Fiber morphology of the fabricated scaffolds was analyzed using scanning electron microscope (SEM) which showed decrease in fiber diameter for the fabricated composites compared to the pristine PU. The wettability studies showed an increase in contact angle for developed composites than the pure PU. Thermal analysis depicted an increase in thermal behavior for the PU/GO/NiO compared to the pristine PU. Surface roughness values were obtained through atomic force microscopy (AFM) which showed a decrease in roughness while adding GO and NiO to the PU. Finally, the fabricated composites showed enhanced deposition of calcium content than the pristine PU. These results corroborated that the developed composites have a significant effect on the fiber morphology, wettability, thermal behavior, surface roughness, and mineral deposition depicting its versatility for bone regeneration.