Fluctuating Storage of the Active Phase in a Mn‐Na2WO4/SiO2 Catalyst for the Oxidative Coupling of Methane

Structural dynamics of a Mn‐Na₂WO₄/SiO₂ catalyst were detected directly under reaction conditions during the oxidative coupling of methane via in situ XRD and operando Raman spectroscopy. A new concept of fluctuating storage and release of an active phase in heterogeneous catalysis is proposed that involves the transient generation of active sodium oxide species via a reversible reaction of Na₂WO₄ with Mn₇SiO₁₂. The process is enabled by phase transitions and melting at the high reaction temperatures that are typically applied.     

Templated‐Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light‐management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr₃ perovskite NC colloids into large area (1 cm²) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr₃ 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal.     

Synthesis and Assembly of Zinc Oxide Microcrystals by a Low-Temperature Dissolution–Reprecipitation Process: Lessons Learned About Twin Formation in Heterogeneous Reactions

Cobalt-doped zinc oxide single crystals with the shape of hexagonal platelets were synthesized by thermohydrolysis of zinc acetate, cobalt acetate, and hexamethylenetetramine (HMTA) in mixtures of ethanol and water. The mineralization proceeds by a low-temperature dissolution–reprecipitation process from the liquid phase by the formation of basic cobalt zinc salts as intermediates. The crystal shape as well as twin formation of the resulting oxide phase can be influenced by careful choice of the solvent mixture and the amount of doping. An understanding of the course of the reaction was achieved by comprehensive employment of analytical techniques (i.e., SEM, XRD, IR) including an in-depth HRTEM study of precipitates from various reaction stages. In addition, EPR as well as UV/Vis spectroscopic measurements provide information about the insertion of the cobalt dopant into the zincite lattice. The Langmuir–Blodgett (LB) technique is shown to be suitable for depositing coatings of the platelets on glass substrates functionalized with polyelectrolyte multilayers and hence is applied for the formation of monolayers containing domains with ordered tessellation. No major differences are found between deposits on substrates with anionic or cationic surface modification. The adherence to the substrates is sufficient to determine the absolute orientation of the deposited polar single crystals by piezoresponse force microscopy (PFM) and Kelvin probe force microscopy (KPFM) studies.     

Coligand role in the NHC nickel catalyzed C–F bond activation: investigations on the insertion of bis(NHC) nickel into the C–F bond of hexafluorobenzene

The reaction of [Ni(Mes₂Im)₂] (1) (Mes₂Im = 1,3-dimesityl-imidazolin-2-ylidene) with polyfluorinated arenes as well as mechanistic investigations concerning the insertion of 1 and [Ni(ⁱPr₂Im)₂] (1ipr) (ⁱPr₂Im = 1,3-diisopropyl-imidazolin-2-ylidene) into the C–F bond of C₆F₆ is reported. The reaction of 1 with different fluoroaromatics leads to formation of the nickel fluoroaryl fluoride complexes trans-[Ni(Mes₂Im)₂(F)(Ar^F)] (Ar^F = 4-CF₃-C₆F₄2, C₆F₅3, 2,3,5,6-C₆F₄N 4, 2,3,5,6-C₆F₄H 5, 2,3,5-C₆F₃H₂6, 3,5-C₆F₂H₃7) in fair to good yields with the exception of the formation of the pentafluorophenyl complex 3 (less than 20%). Radical species and other diamagnetic side products were detected for the reaction of 1 with C₆F₆, in line with a radical pathway for the C–F bond activation step using 1. The difluoride complex trans-[Ni(Mes₂Im)₂(F)₂] (9), the bis(aryl) complex trans-[Ni(Mes₂Im)₂(C₆F₅)₂] (15), the structurally characterized nickel(i) complex trans-[Ni^I(Mes₂Im)₂(C₆F₅)] (11) and the metal radical trans-[Ni^I(Mes₂Im)₂(F)] (12) were identified. Complex 11, and related [Ni^I(Mes₂Im)₂(2,3,5,6-C₆F₄H)] (13) and [Ni^I(Mes₂Im)₂(2,3,5-C₆F₃H₂)] (14), were synthesized independently by reaction of trans-[Ni(Mes₂Im)₂(F)(Ar^F)] with PhSiH₃. Simple electron transfer from 1 to C₆F₆ was excluded, as the redox potentials of the reaction partners do not match and [Ni(Mes₂Im)₂]⁺, which was prepared independently, was not detected. DFT calculations were performed on the insertion of [Ni(ⁱPr₂Im)₂] (1ipr) and [Ni(Mes₂Im)₂] (1) into the C–F bond of C₆F₆. For 1ipr, concerted and NHC-assisted pathways were identified as having the lowest kinetic barriers, whereas for 1, a radical mechanism with fluoride abstraction and an NHC-assisted pathway are both associated with almost the same kinetic barrier.

A combined experimental and theoretical study on the mechanism of the C–F bond activation of C₆F₆ with [Ni(NHC)₂] is provided.     

Hybrid Plasmonic–Aerogel Materials as Optical Superheaters with Engineered Resonances

Solar radiation is a versatile source of energy, convertible to different forms of power. A direct path to exploit it is the generation of heat, for applications including passive building heating, but it can also drive secondary energy-conversion steps. We present a novel concept for a hybrid material which is both strongly photo-absorbing and with superior characteristics for the insulation of heat. The combination of that two properties is rather unique, and make this material an optical superheater. To realize such a material, we are combining plasmonic nanoheaters with alumina aerogel. The aerogel has the double function of providing structural support for plasmonic nanocrystals, which serve as nanoheaters, and reducing the diffusion rate of the heat generated by them, resulting in large local temperature increases under a relatively low radiation intensity. This work includes theoretical discussion on the physical mechanisms impacting the system's balanced thermal equilibrium.     

Synthesis of methyl 2-oxo-5-vinyl-2,5-tetrahydrofuran-3-carboxylate

A synthesis of methyl 2-oxo-5-vinyl-tetrahydrofuran-3-carboxylate involving five synthetic steps from commercially available 3,4-dihydroxybutene is reported.     

Differences in Reactivity of Epoxides in the Copolymerisation with Carbon Dioxide by Zinc-Based Catalysts: Propylene Oxide versus Cyclohexene Oxide

The homogeneous dinuclear zinc catalyst going back to the work of Williams et al. is to date the most active catalyst for the copolymerisation of cyclohexene oxide and CO₂ at one atmosphere of carbon dioxide. However, this catalyst shows no copolymer formation in the copolymerisation reaction of propylene oxide and carbon dioxide, instead only cyclic carbonate is found. This behaviour is known for many zinc‐based catalysts, although the reasons are still unidentified. Within our studies, we focus on the parameters that are responsible for this typical behaviour. A deactivation of the catalyst due to a reaction with propylene oxide turns out to be negligible. Furthermore, the catalyst still shows poly(cyclohexene carbonate) formation in the presence of cyclic propylene carbonate, but the catalyst activity is dramatically reduced. In terpolymerisation reactions of CO₂ with different ratios of cyclohexene oxide to propylene oxide, no incorporation of propylene oxide can be detected, which can only be explained by a very fast back‐biting reaction. Kinetic investigations indicate a complex reaction network, which can be manifested by theoretical investigations. DFT calculations show that the ring strains of both epoxides are comparable and the kinetic barriers for the chain propagation even favour the poly(propylene carbonate) over the poly(cyclohexene carbonate) formation. Therefore, the crucial step in the copolymerisation of propylene oxide and carbon dioxide is the back‐biting reaction in the case of the studied zinc catalyst. The depolymerisation is several orders of magnitude faster for poly(propylene carbonate) than for poly(cyclohexene carbonate).     

Making and breaking peptide bonds: protein engineering using sortase

Sortases are a class of bacterial enzymes that possess transpeptidase activity. It is their ability to site-specifically break a peptide bond and then reform a new bond with an incoming nucleophile that makes sortase an attractive tool for protein engineering. This technique has been adopted for a range of applications, from chemistry-based to cell biology and technology. In this Minireview we provide a brief overview of the biology of sortase enzymes and current applications in protein engineering. We identify areas that lend themselves to further innovation and that suggest new applications.