Chromatographische Trennung und Identifizierung diastereomerer Carotinoide mit grossem räumlichem Abstand der chiralen Zentren

Chroma to graphic Separation and Identification of Diastereomeric Carotinoids with Distant Chiral Centers The high-performance liquid chromatographic separation of diastereomeric C₄₀-carotinoids is described possessing chiral centers which are separated by 18 C-atoms (nonaene system). The method is applied to the separation of the two diastereomers of 6,6′-dihydrorhodoxanthin 1a and 1b (ε,ε-carotene-3,3′-dione) and the six diastereomers of tunaxanlhin (ε,ε-carotene-3,3′-diol; 2a–2f ). Conditions for the separation of lutein [(3R, 3′R, 6′R)-β,ε-carotene-3.3′-diol, 3a ], 3′-epi-lutein [(3R,3′S,6′R)-β, ε-carotene-3,3′-diol, 3b ] and its 13′-cis- ( 3c ) and 13-cis-stereo-isomers( 3d ) are also reported. Identification of the different chromatographic fractions was possible by use of authentic synthetic samples or by ¹H-NMR. spectroscopy.     

Electrospray-Ionization Mass Spectrometry: Detection of a radical cation present in solution: New results on the chemistry of (tetrahydropteridinone)-metal complexes

This paper marks the first reported detection of radical cations by Electrospray-Ionization Mass Spectrometry (ESI-MS). Electron Spin Resonance (ESR) measurements have proven that the detected radical cation existed already in solution and has not been generated by the electrospray ionization technique. However, we observed that the radical cation can be generated by changes in the ionization conditions. A molar mixture of 2-amino-5,6,7,8-tetrahydro-5-methylpterin-4(4H)-one dihydrochloride ( = 5,6,7,8-tetrahydro-N(5)-methylpterin-2 HCl, N(5)-MTHP-2 HCl), and tris(pentane-2,4-dionato)iron(III) in MeCN at pH 2–3 leads to the formation of a [bis(pentane-2,4-dionato)(2-amino-5,6,7,8-tetrahydro-5-methylpteridin-4 (4H)-one)]iron complex ( = [bis(pentane-2,4-dionato) (5,6,7,8-tetrahydro-N(5)-methylpteridin)]iron complex) which can be detected by ESI-MS. The results suggest that this complex might be an Fe^II radical cation, which could possibly be a suitable model complex for the active center of the phenylalanine hydroxylase. In the same solution, the stable radical cation of N(5)-MTHP is identified by ESI-MS and ESR.     

Molecular dynamics simulation of a reverse micelle self assembly in supercritical CO2

In this communication we report on molecular dynamics computer simulations of self-assembly of reverse micelles in supercritical carbon dioxide. The reverse micelles contain perfluoropolyether ammonium carboxylate surfactants and an aqueous core. We observed a quick self-assembly of these micelles over time periods of approximately 5 ns, irrespective of initial conditions. In most cases, the self-assembled perfluorinated reverse micelles have a nice spherical shape and properties consistent with experiments. When the fluorinated surfactant is replaced by its hydrogenated analogue, the assembled aggregate contains a region of direct contact between water and carbon dioxide, indicating that hydrogenated surfactant is not a good agent for creation of microemulsions in water/carbon dioxide mixtures.     

Chemo- and periselectivity in the addition of [OsO2(CH2)2] to ethylene: a theoretical study

Quantum chemical calculations by using density functional theory at the B3LYP level have been carried out to elucidate the reaction course for the addition of ethylene to [OsO2(CH2)2] (1). The calculations predict that the kinetically most favorable reaction proceeds with an activation barrier of 8.1 kcal mol(-1) via [3+2] addition across the O=Os=CH2 moiety. This reaction is -42.4 kcal mol(-1) exothermic. Alternatively, the [3+2] addition to the H2C=Os=CH2 fragment of 1 leads to the most stable addition product 4 (-72.7 kcal mol(-1)), yet this process has a higher activation barrier (13.0 kcal mol(-1)). The [3+2] addition to the O=Os=O fragment yielding 2 is kinetically (27.5 kcal mol(-1)) and thermodynamically (-7.0 kcal mol(-1)) the least favorable [3+2] reaction. The formal [2+2] addition to the Os=O and Os=CH2 double bonds proceeds by initial rearrangement of 1 to the metallaoxirane 1 a. The rearrangement 1-->1 a and the following [2+2] additions have significantly higher activation barriers (>30 kcal mol(-1)) than the [3+2] reactions. Another isomer of 1 is the dioxoosmacyclopropane 1 b, which is 56.2 kcal mol(-1) lower in energy than 1. The activation barrier for the 1-->1 b isomerization is 15.7 kcal mol(-1). The calculations predict that there are no energetically favorable addition reactions of ethylene with 1 b. The isomeric form 1 c containing a peroxo group is too high in energy to be relevant for the reaction course. The accuracy of the B3LYP results is corroborated by high level post-HF CCSD(T) calculations for a subset of species.     

Asymmetrical Bifunctional Organic Peroxides as Initiators for the High-Pressure Polymerization of Ethylene

As a follow-up to earlier investigations into the high-pressure polymerization of ethylene with symmetrically substituted bifunctional peroxides, the suitability of 2,5-dimethylhexane-2-t-butylperoxy-5-perpivalate, a peroxide with different substituents on both O—O groups, has been tested. The polymerization tests were carried out in continuous operation in a stirred autoclave at 1700 bar, 240–285°C, a residence time of 60 s, and an initiator concentration of 3–25 mol ppm in the feed. Conversions of up to 30% were achieved. The specific initiator consumption was 0.2–1 g initiator per kg polyethylene. The density of the polymers obtained was 0.915–0.925 g/mL, their average molecular weight was 40 × 10³ to 60 × 10³, and their melt flow index was 0.001–100 g/10 min. On the basis of the molecular weight distribution, polydispersities of 4–7 were obtained.     

Thermal and acid labile polyurethanes as a new class of responsive materials in polymeric nanoparticles and nanocapsules

A new class of polyurethanes has been designed, containing tertiary carbamate groups in the main chain of the polymer, which enable the resulting polymer to degrade completely under acid and thermal treatment. The decomposition temperatures of the polymers were determined by measuring the evolution of carbon dioxide and other decomposition products using TGA‐MS. Until decomposition of the polymer, no glass transition was found. The polymers exhibit excellent solubility in common organic solvents like chloroform and tetrahydrofuran, making them to suitable materials for film formation. From the obtained polymers, nanoparticles were synthesized by the solvent evaporation method combined with the miniemulsion technique. The resulting nanoparticles can be used as intelligent fillers in films and sensors, since they degrade at temperatures of above 180 °C, which can be detected by a color change reaction with ninhydrin. Polymeric nanocapsules were prepared by an interfacial polyaddition reaction from 2,4‐toluene diisocyanate and tertiary diols performed at the droplet's interface in inverse (water‐in‐oil) miniemulsions. These nanocapsules with an encapsulated photoacid generator can act as a release system, whereby an acidic release through irradiation with ultraviolet light can be triggered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

On learning process of a newsvendor with censored demand information

A behavioural study on the newsvendor problem without demand distribution knowledge or realized demands is conducted. We configure a censored-information scenario, where only sales data in history are provided. With laboratory experiments, we analyse participants ordering levels and ordering oscillations over time. It is observed that participants perform a significant learning process in the censored-information scenario. Moreover, we find that participants make orders by anchoring on the previous-period sales and adjusting to an adapted inventory level. On the basis of the observations, we propose an exponential-type learning (EXP) model to describe the behaviour of decision makers. Comparing with a chasing model that is popularly used in the full-information scenario, the EXP model is more recommended in the censored-information scenario.     

Polyampholytic Graft Copolymers as Matrix for TiO2/Eosin Y/[Mo3S13]2− Hybrid Materials and Light-Driven Catalysis

An effective strategy to enhance the performance of inorganic semiconductors is moving towards organic-inorganic hybrid materials. Here, we report the design of core–shell hybrid materials based on a TiO₂ core functionalized with a polyampholytic (poly(dehydroalanine)-graft-(n-propyl phosphonic acid acrylamide) shell (PDha-g-PAA@TiO₂). The PDha-g-PAA shell facilitates the efficient immobilization of the photosensitizer Eosin Y (EY) and enables electronic interactions between EY and the TiO₂ core. This resulted in high visible-light-driven H₂ generation. The enhanced light-driven catalytic activity is attributed to the unique core–shell design with the graft copolymer acting as bridge and facilitating electron and proton transfer, thereby also preventing the degradation of EY. Further catalytic enhancement of PDha-g-PAA@TiO₂ was possible by introducing [Mo₃S₁₃]²⁻ cluster anions as hydrogen-evolution cocatalyst. This novel design approach is an example for a multi-component system in which reactivity can in future be independently tuned by selection of the desired molecular or polymeric species.