Inductively coupled plasma mass spectrometric determination of molybdenum in urine

A method was developed for the determination of molybdenum (Mo) in human urine by direct dilution of the sample in doubly distilled water with 1% HNO3 (v/v) and inductively coupled mass spectrometry (ICP-MS). In and Y were used as internal standards. Since (98)Mo provides a higher sensitivity, it was chosen as the reference isotope. The influence of different factors, such as sample dilution, HNO3 concentration and the stability of the analyte were evaluated. The detection limit (LOD) was assessed at 0.2 microg/L Mo, while the lower limit of quantification (LOQ) was 0.6 microg/L. Recoveries ranged between 97.2 and 100.7% from solutions containing from 10 to 50 microg/L Mo. Linear calibration curves were generated from 2.1 and 52.1 microg/L with coefficients of variation (CV ) ranging from 1.62 to 3.56%. In order to establish reference values (RV) for molybdenum, the procedure presented here was used to determine Mo in the urine of a population group living in Tuscany, Italy.     

The crystal structure of tris(acetonitrile)nitrosylbis(triphenylphosphine)iridium(III) dihexafluorophosphate. An unusual iridium nitrosyl hexacoordinate complex

Summary The structure of [Ir(NCMe)₃(NO)(PPh₃)₂][PF₆]₂ has been ] determined by x-ray methods. Crystals are orthorhombic, space groupPca 2₁ , witha = 21.753(14),b = 11.678(10),c = 18.474(12) Å and Z = 4. The structure has been solved from diffractometer data and refined by full-matrix leastsquares to R = 0.076 for 2776 observed reflections. The cation is a hexacoordinate and not a pentacoordinate species as expected. The extra acetonitrile molecule,trans to the nitrosyl ligand, is much more weakly bound to the metal atom [Ir-N 2.360(26) against 1.965(20) and 1.912(14) Å for the other two acetonitriles]. The nitrosyl is bent [Ir-N-O 111(1)° Å] and acts as the formally one-electron donor NO^–.     

Polar substituent effects in the bicyclo[1.1.1]pentane ring system: acidities of 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids

Experimental gas-phase acidities are reported for a series of 3-substituted (X) bicyclo [1.1.1]pent-1-yl carboxylic acids (1, Y = COOH). A comparison with available calculated data (MP2/6-311++G**// B3LYP/6-311+G**) reveals good agreement. The relative substituent effects are shown to be adequately described by a much lower level of theory (B3LYP/6-31+G*). Various correlations are presented which clearly point to polar field effects as being the origin of the relative acidities.     

Optimal virtual orbitals to relax wave functions built up with transferred extremely localized molecular orbitals

Extremely localized molecular orbitals (ELMOs), namely orbitals strictly localized on molecular fragments, are easily transferable from one molecule to another one. Hence, they provide a natural way to set up the electronic structure of large molecules using a data base of orbitals obtained from model molecules. However, this procedure obviously increases the energy with respect to a traditional MO calculation. To gain accuracy, it is important to introduce a partial electron delocalization. This can be carried out by defining proper optimal virtual orbitals that supply an efficient set for nonorthogonal configurations to be employed in VB-like expansions.     

Stochastic theory of size exclusion chromatography by the characteristic function approach

A general stochastic theory of size exclusion chromatography (SEC) able to account for size dependence on both pore ingress and egress processes, moving zone dispersion and pore size distribution, was developed. The relationship between stochastic-chromatographic and batch equilibrium conditions are discussed and the fundamental role of the 'ergodic' hypothesis in establishing a link between them is emphasized. SEC models are solved by means of the characteristic function method and chromatographic parameters like plate height, peak skewness and excess are derived. The peak shapes are obtained by numerical inversion of the characteristic function under the most general conditions of the exploited models. Separate size effects on pore ingress and pore egress processes are investigated and their effects on both retention selectivity and efficiency are clearly shown. The peak splitting phenomenon and peak tailing due to incomplete sample sorption near to the exclusion limit is discussed. An SEC model for columns with two types of pores is discussed and several effects on retention selectivity and efficiency coming from pore size differences and their relative abundance are singled out. The relevance of moving zone dispersion on separation is investigated. The present approach proves to be general and able to account for more complex SEC conditions such as continuous pore size distributions and mixed retention mechanism.     

Excited state dynamics with the direct trajectory surface hopping method: azobenzene and its derivatives as a case study

We review the recent studies of the photoisomerization dynamics of azobenzene and its derivatives by surface hopping simulations based on semiempirical potential energy surfaces. We examine the ability of semiclassical methods to predict the excited state dynamics and to reproduce transient spectroscopic signals that constitute the most direct experimental evidence in this field. We show that the available simulation methods yield a deep insight into the mechanism of photochemical reactions and excited state decay, and a fairly good quantitative agreement with experimental findings. Probably the most important technical improvements we can envisage concern the surface hopping algorithm and the usage of ab initio data in the simulation of transient spectra. Concerning azobenzene, our results show that the isomerization mechanism is torsion of the N=N double bond, both by n → π* and by π → π* excitation. The influence of the solvent and the findings of some recent femtochemistry experiments deserve further work to be fully interpreted.     

Synthesis and N.m.r. studies of bis-trisubstituted phosphine platinum(o) and palladium(o) complexes with push-pull olefins

Summary Platinum(0) and palladium(0) complexes of the type: P₂M(R₁R₂C=CR₃R₄) (P=trisubstituted phosphine; R₁, R₂, R₃ and R₄ are different groups having electron acceptor or electron donor properties; M=Pt or Pd) with so called pushpull olefins, have been prepared and characterized. In some cases unusual patterns in the n.m.r. spectra of olefinic protons were observed. The spectra were analyzed by computer simulation and general rules for ABMX patterns for this type of complexes are given.     

Experimental and theoretical study of the interaction of CO2 with alpha-Al2O3

Density functional molecular cluster calculations are combined with X-ray photoelectron spectroscopy (XPS), quadrupolar mass spectrometry (QMS), and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy to investigate the interaction of CO2 with alpha-Al2O3 and partially reduced alpha-Al2O3. The electronic structure of the stoichiometric and partially reduced substrate, adsorbate geometries, chemisorption enthalpies, and adsorbate vibrational parameters are computed and discussed. Theoretical results agree quite well with experimental data and previous theoretical investigations. As far as the adsorbate-substrate interaction is concerned, the results of our calculations indicate that CO2 forms bidentate-chelating carbonate species. The bonding scheme of this surface complex implies a significant substrate-->adsorbate transfer of charge (from the occupied dangling bond of a surface Lewis base site into one component of the CO2 2 pi u LUMO) assisted by a definitely weaker adsorbate-->substrate donation (from one component of the CO2 1 pi g HOMO into an empty dangling bond of a surface Lewis acid site). Our estimate of the chemisorption enthalpy (-15 kcal/mol) agrees quantitatively with calorimetric data reported for CO2 adsorbed on high surface area alpha-alumina (-16.0 kcal/mol). [Mao, C.-F.; Vannice, M. A. Appl. Catal. A 1994, 111, 151.] According to XPS and QMS outcomes, theoretical results predict that the interaction of CO2 with partially reduced alpha-Al2O3 gives rise to the reduction of the adsorbate to CO and to the concomitant substrate reoxidation.     

Selective cleavage of P-N bonds and the conversion of rhodium N-pyrrolyl phosphine complexes into diphosphoxane-bridged dimers

Rhodium(I) complexes trans-[RhCl(CO)(PR(2)[NC(4)H(3)C(O)Me-2])(2)] (R = Ph, NC(4)H(4)) react with water to give the diphosphoxane-bridged dimers [Rh(2)Cl(2)(CO)(2)(mu-PR(2)OPR(2))(2)] following cleavage of the P-N bonds to the 2-acetyl-N-pyrrolyl groups. The two dimers have been crystallographically characterized and show a number of structural differences, with the PPh(2)OPPh(2) compound possessing semibridging chloride and carbonyl ligands whereas the P(NC(4)H(4))(2)OP(NC(4)H(4))(2) compound contains only terminal chlorides and carbonyls. No evidence for cleavage of the P-N bonds involving the unfunctionalized N-pyrrolyl groups in trans-[RhCl(CO)(P[NC(4)H(4)](2)[NC(4)H(3)C(O)Me-2])(2)] was observed.     

The photoisomerization mechanism of azobenzene: a semiclassical simulation of nonadiabatic dynamics

We have simulated the photoisomerization dynamics of azobenzene, taking into account internal conversion and geometrical relaxation processes, by means of a semiclassical surface hopping approach. Both n-->pi* and pi-->pi* excitations and both cis-->trans and trans-->cis conversions have been considered. We show that in all cases the torsion around the N==N double bond is the preferred mechanism. The quantum yields measured are correctly reproduced and the observed differences are explained as a result of the competition between the inertia of the torsional motion and the premature deactivation of the excited state. Recent time-resolved spectroscopic experiments are interpreted in the light of the simulated dynamics.