Studies on the properties of organoselenium(IV) fluorides and azides

The reaction of organoselenides and -diselenides (R2Se and (RSe)2) with XeF2 furnished the corresponding organoselenium(IV) difluorides R2SeF2 (R=Me (1), Et (2), iPr (3), Ph (4), Mes (=2,4,6-(Me)3C6H2) (5), Tipp (=2,4,6-(iPr)3C6H2) (6), 2-Me 2NCH2C6H4 (7)), and trifluorides RSeF3 (R=Me (8), iPr (9), Ph (10), Mes (11), Tipp (12), Mes* (=2,4,6-(tBu) 3C6H2) (13), 2-Me2NCH2C6H4 (14)), respectively. In addition to characterization by multinuclear NMR spectroscopy, the first molecular structure of an organoselenium(IV) difluoride as well as the molecular structures of subsequent decomposition products have been determined. The substitution of fluorine atoms with Me3SiN3 leads to the corresponding organoselenium(IV) diazides R2Se(N3)2 (R=Me (15), Et (16), iPr (17), Ph (18), Mes (19), 2-Me 2NCH2C6H4 (20)) and triazides RSe(N3)3 (R=Me (21), iPr (22), Ph (23), Mes (24), Tipp (25), Mes* (26), 2-Me2NCH2C6H4 (27)), respectively. The organoselenium azides are extremely temperature-sensitive materials and can only be handled at low temperatures.     

Efficient linear-scaling calculation of response properties: density matrix-based Laplace-transformed coupled-perturbed self-consistent field theory

A density matrix-based Laplace reformulation of coupled-perturbed self-consistent field (CPSCF) theory is presented. It allows a direct, instead of iterative, solution for the integral-independent part of the density matrix-based CPSCF (D-CPSCF) equations [J. Kussmann and C. Ochsenfeld, J. Chem. Phys. 127, 054103 (2007)]. In this way, the matrix-multiplication overhead compared to molecular orbital-based solutions is reduced to a minimum, while at the same time, the linear-scaling behavior of D-CPSCF theory is preserved. The present Laplace-based equation solver is expected to be of general applicability.     

Hydrogen Peroxide Production of Individual Nanosecond Pulsed Discharges Submerged in Water of Elevated Conductivity

The production of hydrogen peroxide (H₂O₂) is a key parameter for the performance of pulsed discharges submerged in water utilized as advanced oxidation process. So far, any related assessment of the underlying mechanism was conducted for the application of several hundred discharges, which did not allow for a correlation with physical processes. Moreover, the production was rarely investigated depending on water conductivity as one of the most important parameters for the development of submerged discharges. Accordingly, hydrogen peroxide generation was investigated here for individual single discharge events instigated with 100 ns high-voltage pulses in water with three different conductivities and was associated with the discharge development, i. e. spatial expansion and dissipated electrical energy. The approach necessitated the improvement of an electrochemical flow injection analysis based on the reaction of Prussian blue with H₂O₂. Hydrogen peroxide concentrations were quadratically increasing with propagation time and stable for different water conductivities. H₂O₂ production per unit volume of a discharge was constant over time with an estimated rate constant of 3.2 mol ⋅ m⁻¹ s⁻¹, averaged over the crosssectional area of all discharge filaments. However, the individually dissipated energy increased with conductivity, hence, the production efficiency decreased from 6.1 g ⋅ kWh⁻¹ to 1.4 g ⋅ kWh⁻¹, which was explained by increased resistive losses within the bulk liquid.     

Desorption of plasmid DNA from anion exchangers: Salt concentration at elution is independent of plasmid size and load

Detailed studies on the sorption behavior of plasmids on anion exchangers are rare compared to proteins. In this study, we systematically compare the elution behavior of plasmid DNA on three common anion exchange resins using linear gradient and isocratic elution experiments. Two plasmids of different lengths, 8 and 20 kbp, were studied and their elution characteristics were compared to a green fluorescent protein. Using established methods for determining retention characteristics of biomolecules in ion exchange chromatography lead to remarkable results. In contrast to the green fluorescent protein, plasmid DNA consistently elutes at one characteristic salt concentration in linear gradient elution. This salt concentration was the same independent of plasmid size but differed slightly for different resins. The behavior is consistent also at preparative loadings of plasmid DNA. Thus, only a single linear gradient elution experiment is sufficient to design elution in a process scale capture step. At isocratic elution conditions, plasmid DNA elutes only above this characteristic concentration. Even at slightly lower concentrations most plasmids remain tightly bound. We hypothesize, that the desorption is accompanied by a conformational change leading to a reduced number of available negative charges for binding. This explanation is supported by structural analysis before and after elution.     

Modification of Branched Poly(ethylene imine) with d-Fructose for Selective Delivery of siRNA into Human Breast Cancer Cells

Branched poly(ethylene imine) (bPEI) is frequently used in RNA interference (RNAi) experiments as a cationic polymer for the delivery of small interfering RNA (siRNA) because of its ability to form stable polyplexes that facilitate siRNA uptake. However, the use of bPEI in gene delivery is limited by its cytotoxicity and a need for target specificity. In this work, bPEI is modified with d- fructose to improve biocompatibility and target breast cancer cells through the overexpressed GLUT5 transporter. Fructose-substituted bPEI (Fru−bPEI) is accessible in three steps starting from commercially available protected fructopyranosides and bPEI. Several polymers with varying molecular weights, degrees of substitution, and linker positions on d- fructose (C1 and C3) are synthesized and characterized with NMR spectroscopy, size exclusion chromatography, and elemental analysis. In vitro biological screenings show significantly reduced cytotoxicity of 10 kDa bPEI after fructose functionalization, specific uptake of siRNA polyplexes, and targeted knockdown of green fluorescent protein (GFP) in triple-negative breast cancer cells (MDA-MB-231) compared to noncancer cells (HEK293T).     

Influence of the remanent polarisation on the liquid crystal alignment in composite films of ferroelectric poly(vinylidene fluoride-trifluoroethylene) and a cyanobiphenyl-based liquid crystal

Polymer-dispersed liquid crystals (PDLCs) of ferroelectric poly(vinylidene fluoride-trifluoroethylene) and nematic 4-cyano-4?-n-hexylbiphenyl (6CB) or 4-cyano-4?-n-pentylbiphenyl (5CB) were prepared to study the effect of the remanent polarisation of the polymer on the liquid crystal alignment. We measured the macroscopic alignment of the liquid crystal molecules in the thickness direction by means of Infrared Transition-Moment Orientational Analysis. Electrical poling at 100 V/µm caused an increased order parameter up to 0.15. After subsequent annealing above the nematic-to-isotropic phase-transition temperature, the order parameter was reduced to 0.02. Nevertheless, the order parameter was still higher than for non-poled film indicating a slight orientation in thickness direction. Both values are lower than those expected from model calculations. In agreement with dielectric measurements, we attribute this result to the shielding effect of mobile charge carriers within the liquid crystal inclusions.     

Optical response of the Cu2S2 diamond core in (NGuaS)2Cl2

Density functional theory (DFT) and time‐dependent DFT calculations are presented for the dicopper thiolate complex Cu₂(NGuaS)₂Cl₂ [NGuaS=2‐(1,1,3,3‐tetramethylguanidino) benzenethiolate] with a special focus on the bonding mechanism of the Cu₂S₂Cl₂ core and the spectroscopic response. This complex is relevant for the understanding of dicopper redox centers, for example, the Cu_A center. Its UV/Vis absorption is theoretically studied and found to be similar to other structural Cu_A models. The spectrum can be roughly divided in the known regions of metal d‐d absorptions and metal to ligand charge transfer regions. Nevertheless the chloride ions play an important role as electron donors, with the thiolate groups as electron acceptors. The bonding mechanism is dissected by means of charge decomposition analysis which reveals the large covalency of the Cu₂S₂ diamond core mediated between Cu and S‐S π and π* orbitals forming Cu‐S σ bonds. Measured resonant Raman spectra are shown for 360‐ and 720‐nm excitation wavelength and interpreted using the calculated vibrational eigenmodes and frequencies. The calculations help to rationalize the varying resonant behavior at different optical excitations. Especially the phenylene rings are only resonant for 720 nm. © 2016 Wiley Periodicals, Inc.     

25‐Hydroxyvitamin D3 Synthesis by Enzymatic Steroid Side‐Chain Hydroxylation with Water

The hydroxylation of vitamin D₃ (VD₃, cholecalciferol) side chains to give 25‐hydroxyvitamin D₃ (25OHVD₃) is a crucial reaction in the formation of the circulating and biologically active forms of VD₃. It is usually catalyzed by cytochrome P450 monooxygenases that depend on complex electron donor systems. Cell‐free extracts and a purified Mo enzyme from a bacterium anaerobically grown with cholesterol were employed for the regioselective, ferricyanide‐dependent hydroxylation of VD₃ and proVD₃ (7‐dehydrocholesterol) into the corresponding tertiary alcohols with greater than 99 % yield. Hydroxylation of VD₃ strictly depends on a cyclodextrin‐assisted isomerization of VD₃ into preVD₃, the actual enzymatic substrate. This facile and robust method developed for 25OHVD₃ synthesis is a novel example for the concept of substrate‐engineered catalysis and offers an attractive alternative to chemical or O₂ /electron‐donor‐dependent enzymatic procedures.     

Nitrous Oxide as a Hydrogen Acceptor for the Dehydrogenative Coupling of Alcohols

The oxidation of alcohols with N₂O as the hydrogen acceptor was achieved with low catalyst loadings of a rhodium complex that features a cooperative bis(olefin)amido ligand under mild conditions. Two different methods enable the formation of either the corresponding carboxylic acid or the ester. N₂ and water are the only by‐products. Mechanistic studies supported by DFT calculations suggest that the oxygen atom of N₂O is transferred to the metal center by insertion into the Rh?H bond of a rhodium amino hydride species, generating a rhodium hydroxy complex as a key intermediate.