Isolation of selenium organic species from antarctic krill after enzymatic hydrolysis

Total selenium content and its distribution in the soluble and insoluble protein-bound fractions obtained after aqueous extraction of antarctic krill samples were determined. About 26% of the total selenium (2.4 g g^–1 dry weight) was found in the supernatant; the rest was in the pellet. Isolation of low molecular selenium-containing fractions was also performed by enzymatic digestion of the protein, followed by size-exclusion chromatography in conjunction with atomic absorption spectrometry. From the applied various proteinases (pronase E, subtilisin Carlsberg, trypsin, chymotrypsin, proteinase and proteinase N from Bacillus subtilis and Novo 0.6 MPX enzyme), the treatment with pronase E led to best recovery of selenium. About 96% of the total Se was found in the hydrolysate, mainly in low molecular weight fractions. Eighty percent of the Se species were in fractions with molecular weights in the range of amino acids and short peptides. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC-ICP-MS) allowed the identification of selenomethionine and the assumption that selenocystine or its derivatives were the main species in these fractions.     

Conformation and Dynamics of (−)-β-Caryophyllene

(?)-β-Caryophyllene (1) adopts three conformations in solution: αα(48%), βα(28%), and ββ(24%). The conformations were identified by an analysis of the ¹³C- and ¹H-NMR spectra at ?87.2 and ?153.8° in connection with APT, HETCOR, and COSY spectra, and subsequent NOESY experiments. The activation parameters of the conversion αα → βα were determined from a bandshape analysis of exchange-broadened ¹³C-NMR spectra of 8-[methylene-¹³C]- 1 to give ΔH^≠ = 5.9 ± 0.3 kcal/mol, ΔS^? = ?8.1 ± 1.8 cal/mol. · K. and ΔG = ?8.3 ± 0.8 kcal/mol. The observed population ratio of the different conformers is best described by MM3.     

Determination of fatty acids in atmospheric samples via GC/MS

Summary Atmospheric precipitation and aerosol samples are characterized by a complex mixture of several organic compounds. A simple method for the simultaneous determination of the main compound classes by GC/MS is presented. In detail, seasonal variations of C₈–C₃₂ fatty acids in precipitation in a semirural area have been studied. Total fatty acids concentrations of 7–53 g/l were detected. Summer rain is characterized by high amounts of fatty acids >C₂₀ and lower amounts of C₁₁–C₂₀ species. Two effects may be responsible: larger emission rates of fatty acids during vegetation periods and an increased influence of vapour phase due to higher temperatures during summer. CPI values showed no general trend; lower CPI values for winter rain could not be observed. This would be expected if anthropogenic sources play an important role. Monounsaturated fatty acids (C_16:1, C_18:1) were more abundant during winter than in summer. High concentrations of polyunsaturated fatty acids (C_18:x) could be detected during summer. High relative concentrations of the potential oxidation products of the unsaturated species, nonanedioic acid and w-oxononanoic acid, are associated with relatively low concentrations of their precursors.     

Application of a chemometric method for simultaneous determination of acetaminophen and diclofenac in content-uniformity and drug-dissolution studies

A new, repeatable, and rapid method has been developed for resolution of binary mixtures of acetaminophen and diclofenac with minimum sample pretreatment and without separation of the analytes. The method, based on the PLS1 processing of absorbance data in the UV region, was successfully used for quantification of the drug content of three tablet preparations. The results obtained were in good agreement with HPLC recovery data. The method also enabled determination of drug-dissolution profiles of these commercial tablets, by simultaneous determination of both analytes during the dissolution test.     

Electrical Conductance and Volumetric Studies in Aqueous Solutions of DL-Pyroglutamic Acid

Conductivity measurements of DL-pyroglutamic acid and sodium pyroglutamate in dilute aqueous solutions were performed in the 288.15–323.15 K temperature range. The limiting molar conductances of pyroglutamate anion, λ^o(pGlu⁻, T) and the dissociation constants of pyroglutamic acid, K(T) were derived from the Onsager, and the Quint and Viallard conductivity equations. Densities of aqueous solutions with molalities lower than 0.5 mol-kg⁻¹ were determined at 5 K intervals from T = 288.15 K to 333.15 K. Densities served to evaluate the apparent molar volumes, V_2,φ(m, T), the cubic expansion coefficients, α (m,T) and the changes of the isobaric heat capacities with respect to pressure, (∂ C_P/∂ P)_T,m. They were correlated qualitatively with the changes in the structure of water when pyroglumatic acid is dissolved in it.     

Mutual storage mode ion/ion reactions in a hybrid linear ion trap

Ion/ion proton transfer reactions involving mutual storage of both ion polarities in a linear ion trap (LIT) that comprises part of a hybrid triple quadrupole/linear ion trap mass spectrometer have been effected. Mutual ion storage in the x- and y-dimensions arises from the normal operation of the oscillating quadrupole field of the quadrupole array, while storage in the z-dimension is enabled by applying unbalanced radio-frequency amplitudes to opposing sets of rods of the array. Efficient trapping (>90%) is achieved for thermalized ions over periods of several seconds. Reactions were demonstrated for multiply charged protein/peptide cations formed by electrospray with anions derived from glow discharge ionization of perfluoro(methyldecalin) (PMD) introduced from the side of the LIT rod array. Doubly and singly charged protein ions are readily formed via ion/ion reactions. The parameters that affect ion/ion reactions are discussed, including the degree of RF unbalance on the LIT rods, vacuum pressure, nature of the buffer gas, reaction time, anion abundance, and the low mass cutoff for ion/ion reaction. The present system has a demonstrated upper mass-to-charge ratio limit of at least 33,000. The system also has high flexibility with respect to defining MS(n) experiments involving both collision-induced dissociation (CID) and ion/ion reactions. Experiments are demonstrated involving beam-type CID in the pressurized collision quadrupole (Q2) followed by ion/ion reactions involving the product ions in the LIT. Ion parking experiments are also demonstrated using the mutual storage ion/ion reaction mode in the LIT, with a parking efficiency over 60%.     

Effect of concentration on surfactant micelle shapes —A molecular dynamics study

Many aspects of the behavior of surfactants have not been well understood due to the coupling of many different mechanisms. Computer simulation is, therefore, attractive in the sense that it can explore the effect of different mechanisms separately. In this paper, the shapes, structures and sizes of sodium dodecylbenzenesulfonate (SDBS) micelles under different concentrations in an oil/water mixture were studied via molecular dynamics (MD) simulations using a simplified atomistic model which basically maintains the hydrophile and lipophile properties of the surfactant molecules. Above the critical micellar concentration (cmc), surfactant molecules aggregate spontaneously to form a wide variety of assemblies, from spherical to rodlike, wormlike and bilayer micelles. Changes in their ratios of the principle moments of inertia (g₁/g₃, g₂/g₃) indicated the transition of micelle shapes at different concentrations. The aggregation number of micelle is found to have a power-law dependence on surfactant concentration.     

Syntheses and spectroscopic studies on zinc(II) and mercury(II) complexes of isatin-3-thiosemicarbazone

Zinc(II) and mercury(II) complexes were prepared by reacting isatin-3-thiosemicarbazone (ISTSCH) with zinc(II) acetate or mercury(II) bromide. The complexes were characterized by IR, Raman, diffuse reflectance, ¹H and ¹³C NMR spectra and elemental analysis. Tetrahedral structures for Zn(ISTSC)₂ and Hg(ISTSCH)Br₂ are suggested.     

Depression in the cloud point of Tween in the presence of glycol additives and triblock polymers

Cloud point (C_P) measurements of Tween 20 and Tween 80 were carried out in the presence of various glycol oligomers and triblock polymers (TBP). The cloud points of both Tween 20 and 80 decrease in the presence of both types of additives. Among the glycol oligomeric additives, ethylene glycol monobutyl ether was found to reduce the C_P maximum. An increase in the repeating units of polymeric glycol additives leads to a decrease in C_P. Reduction in the C_P in the presence of TBP depends upon the increase in hydrophobic/hydrophilic ratio among the polypropylene to polyethylene units.     

Trace elemental analysis of automotive paints by laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS)

Paints and coatings are frequently encountered as types of materials that are submitted to forensic science laboratories as a result of trace evidence transfers. The aim of this study was to develop a method to complement the commonly used techniques in a forensic laboratory in order to better characterize these samples for forensic purposes. A laser ablation method has been used to simultaneously sample several layers directly prior to introduction into an inductively coupled plasma-mass spectrometer for the detection and quantification of the trace metals present in the layer(s). Time-resolved analysis plots displaying the elemental response and quantification of selected metals are compared to associate/discriminate paint samples. Matrix-matched standards were successfully incorporated into the analysis scheme for quantification of lead in the solid paint samples. Preparation of new matrix-matched standards for quantification of additional elements developed for this study are also presented. A sample set of eighteen (18) survey automotive paint samples have been analyzed with the developed method in order to determine the utility of LA-ICP-MS for trace element analysis of paints.