Ultralow phase noise microwave generation with an Er:fiber-based optical frequency divider

We present an optical frequency divider based on a 200 MHz repetition rate Er:fiber mode-locked laser that, when locked to a stable optical frequency reference, generates microwave signals with absolute phase noise that is equal to or better than cryogenic microwave oscillators. At 1 Hz offset from a 10 GHz carrier, the phase noise is below -100 dBc/Hz, limited by the optical reference. For offset frequencies >10 kHz, the phase noise is shot noise limited at -145 dBc/Hz. An analysis of the contribution of the residual noise from the Er:fiber optical frequency divider is also presented.     

Hardy's paradox and violation of a state-independent Bell inequality in time

Tests such as Bell's inequality and Hardy's paradox show that joint probabilities and correlations between distant particles in quantum mechanics are inconsistent with local realistic theories. Here we experimentally demonstrate these concepts in the time domain, using a photonic entangling gate to perform nondestructive measurements on a single photon at different times. We show that Hardy's paradox is much stronger in time and demonstrate the violation of a temporal Bell inequality independent of the quantum state, including for fully mixed states.     

Deconvolution with simple extrapolation for improved cerebral blood flow measurement in dynamic susceptibility contrast magnetic resonance imaging during acute ischemic stroke

Magnetic resonance (MR) perfusion imaging is a clinical technique for measuring brain blood flow parameters during stroke and other ischemic events. Ischemia in brain tissue can be difficult to accurately measure or visualize when using MR-derived cerebral blood flow (CBF) maps. The deconvolution techniques used to estimate flow can introduce a mean transit time-dependent bias following application of noise stabilization techniques. The underestimation of the CBF values, greatest in normal tissues, causes a decrease in the image contrast observed in CBF maps between normally perfused and ischemic tissues; resulting in ischemic areas becoming less conspicuous. Through application of the proposed simple extrapolation technique, CBF biases are reduced when missing high-frequency signal components in the MR data removed during deconvolution noise stabilization are restored. The extrapolation approach was compared with other methods and showed a statistically significant increase in image contrast in CBF maps between normal and ischemic tissues for white matter (P<.05) and performed better than most other methods for gray matter. Receiver operator characteristic curve analysis demonstrated that extrapolated CBF maps better-detected penumbral regions. Extrapolated CBF maps provided more accurate CBF estimates in simulations, suggesting that the approach may provide a better prediction of outcome in the absence of treatment.     

Topological order at nonzero temperature

We propose a definition for topological order at nonzero temperature in analogy to the usual zero temperature definition that a state is topologically ordered, or "nontrivial", if it cannot be transformed into a product state (or a state close to a product state) using a local (or approximately local) quantum circuit. We prove that any two-dimensional Hamiltonian which is a sum of commuting local terms is not topologically ordered at T > 0. We show that such trivial states cannot be used to store quantum information using certain stringlike operators. This definition is not too restrictive, however, as the four dimensional toric code does have a nontrivial phase at nonzero temperature.     

Explorations and Expectations of Equidistribution Adaptations for Nonlinear Quenching Problems

Finite difference computations that involve spatial adaptation commonly employ an equidistribution principle. In these cases, a new mesh is constructed such that a given monitor function is equidistributed in some sense. Typical choices of the monitor function involve the solution or one of its many derivatives. This straightforward concept has proven to be extremely effective and practical. However, selections of core monitoring functions are often challenging and crucial to the computational success. This paper concerns six different designs of the monitoring function that targets a highly nonlinear partial differential equation that exhibits both quenching-type and degeneracy singularities. While the first four monitoring strategies are within the so-called primitive regime, the rest belong to a later category of the modified type, which requires the priori knowledge of certain important quenching solution characteristics. Simulated examples are given to illustrate our study and conclusions.     

Large Eddy Simulations of a piloted lean premix jet flame using finite-rate chemistry

A Large Eddy Simulation (LES) model capable of accurately representing finite-rate chemistry effects in turbulent premixed combustion is presented. The LES computations use finite-rate chemistry and implicit LES combustion modelling to simulate an experimentally well-documented lean-premixed jet flame stabilized by a stoichiometric pilot. The validity of the implicit LES assumption is discussed and criteria are expressed in terms of subgrid scale Damköhler and Karlovitz numbers. Simulation results are compared to experimental data for velocity, temperature and species mass fractions of CH₄, CO and OH. The simulation results highlight the validity and capability of the present approach for the flame and in general the combustion regime examined. A sensitivity analysis to the choice of the finite-rate chemistry mechanism is reported, this analysis indicates that the one and two-step global reaction mechanisms evaluated fail to capture the reaction layer with sufficient accuracy, while a 20-species skeletal mechanism reproduces the experimental observations accurately including the key finite-rate chemistry indicators CO and OH. The LES results are shown to be grid insensitive and that the grid resolution within the bounds examined is far less important compared to the sensitivity of the finite-rate chemistry representation. The results are analyzed in terms of the flame dynamics and it is shown that intense small scale mixing (high Karlovitz number) between the pilot and the jet is an important mechanism for the stabilization of the flame.     

An experimental and modeling study of the autoignition of 3-methylheptane

An experimental and kinetic modeling study of the autoignition of 3-methylheptane, a compound representative of the high molecular weight lightly branched alkanes found in large quantities in conventional and synthetic aviation kerosene and diesel fuels, is reported. Shock tube and rapid compression machine ignition delay time measurements are reported over a wide range of conditions of relevance to combustion engine applications: temperatures from 678 to 1356 K; pressures of 6.5, 10, 20, and 50 atm; and equivalence ratios of 0.5, 1.0, and 2.0. The wide range of temperatures examined provides observation of autoignition in three reactivity regimes, including the negative temperature coefficient (NTC) regime characteristic of paraffinic fuels. Comparisons made between the current ignition delay measurements for 3-methylheptane and previous results for n-octane and 2-methylheptane quantifies the influence of a single methyl substitution and its location on the reactivity of alkanes. It is found that the three C₈ alkane isomers have indistinguishable high-temperature ignition delay but their ignition delay times deviate in the NTC and low-temperature regimes in correlation with their research octane numbers. The experimental results are compared with the predictions of a proposed kinetic model that includes both high- and low-temperature oxidation chemistry. The model mechanistically explains the differences in reactivity for n-octane, 2-methylheptane, and 3-methylheptane in the NTC through the influence of the methyl substitution on the rates of isomerization reactions in the low-temperature chain branching pathway, that ultimately leads to ketohydroperoxide species, and the competition between low-temperature chain branching and the formation of cyclic ethers, in a chain propagating pathway.     

Finding thermoacoustic limit cycles for a ducted Burke-Schumann flame

This paper examines nonlinear thermoacoustic oscillations of a ducted Burke-Schumann diffusion flame. The nonlinear dynamics of the thermoacoustic system are studied using two distinct approaches. In the first approach, a continuation analysis is performed to find limit cycle amplitudes over a range of operating conditions. The strength of this approach is that one can characterize the coupled system’s nonlinear behaviour over a large parameter space with relative ease. It is not able to give physical insight into that behaviour, however. The second approach uses a Flame Describing Function (FDF) to characterize the flame’s response to harmonic velocity fluctuations over a range of forcing frequencies and forcing amplitudes, from which limit cycle amplitudes can be found. A strength of the FDF approach is that it reveals the physical mechanisms responsible for the behaviour observed. However, the calculation of the FDF is time consuming, and it must be recalculated if the flame’s operating conditions change. With the strengths and shortcomings of the two approaches in mind, this paper advocates combining the two to provide the dynamics over a large parameter space and, furthermore, physical insight into that behaviour at judiciously-chosen points in the parameter space. Further physical insight concerning the flame’s near-linear response at all forcing amplitudes is given by studying the forced flame in the time domain. It is shown that, for this flame model, the limit cycles arise because of the flame’s nonlinear behaviour when it is close to the inlet.