Vesicle adsorption and lipid bilayer formation on glass studied by atomic force microscopy

The adsorption of phosphatidylcholine (PC) vesicles (30, 50, and 100 nm nominal diameters) and of dye-labeled PC vesicles (labeled with 6% Texas Red fluorophore (TR) and encapsulated carboxy fluorescein (CF)) to glass surfaces was studied by contact mode atomic force microscopy in aqueous buffer. These studies were performed in part to unravel details of the previously observed isolated rupture of dye-labeled PC vesicles on glass (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), specifically to differentiate partial rupture, that is, pore formation and leakage of entrapped dye, from full rupture to form bilayer disks. In addition, the adhesion potential of PC vesicles on glass was calculated based upon the adhesion-driven flattening of adsorbed vesicles and a newly developed theoretical model. The vesicles were found to flatten considerably upon adsorption to glass (width-to-height ratio of approximately 5), which leads to an estimate for the adhesion potential and for the critical rupture radius of 1.5 x 10(-4) J/m2 and 250 nm, respectively. Independent of vesicle size and loading with dye molecules, the adsorption of intact vesicles was observed at all concentrations below a threshold concentration, above which the formation of smooth lipid bilayers occurred. In conjunction with previous work (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), these data show that 6% TR 20 mM CF vesicles adsorb to the surface intact but undergo partial rupture in which they exchange content with the external buffer.     

New colorimetric and fluorimetric methods for the determination of 1,4-cyclohexanedione

1,4-Cyclohexanedione has been determined by reaction with o-phthalaldehyde in sulfuric acid. The determinations depend on the formation of a dicationic salt of pentacenequinone. A sensitive and highly selective fluorimetric method is recommended, but the reaction can also be used spectrophotometrically. Many organic compounds, as well as the isomers of 1,4-cyclohexanedione, give negative results. A spot test is described which can be used for quick preliminary investigations of complex mixtures for I,4-cyclohexanedione.     

Conformation and luminescence of isolated molecular semiconductor molecules

In this article, we describe, for the first time, direct comparisons of the detailed structures of two small molecule organic semiconductors, oligo(phenylenvinylene) (OPV) molecules with chains of five and six phenyl rings (5R-OC(8)H(17) and 6R-OC(8)H(17)), respectively, and their luminescence properties on a single molecule level. Our data originate from a combination of two powerful diagnostic tools in physical chemistry: ion mobility and single molecule fluorescence spectroscopy. These techniques enable us to precisely determine the shapes of isolated molecules in the gas phase and to correlate these structures to the emission from single molecules supported on bare glass substrates. The principal structural uncertainty in OPVs is the (possible) presence and location of cis-vinylene linkages (cis-defects) in the oligomer. The results show that the structures observed in the gas phase are strongly correlated to the categories of molecules observed in the single molecule polarization anisotropy measurements with nearly identical distributions for the two OPV molecules studied. Each category is also characterized by the luminescence efficiency of the molecules in each class, providing a direct correlation between the luminescence efficiency and the shape of the molecule. This combination of techniques provides a level of information far beyond that obtained via any other analytical technique.     

Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

What crystals of small analogs are trying to tell us about cellulose structure

The molecular geometries from crystal structures of 23 small molecules such as cellobiose were reviewed and extrapolated to give model cellulose chains. Within a given model, all monosaccharide units and their linkages are identical so the models are regular helices. Despite fairly large ranges for the glycosidic linkage torsion angles and , 29° and 57°, respectively, there is little variation in the n and h parameters of the model helices. They are extended, with h values (the advance per residue along the helix axis) of 5.04–5.27 Å. Some models were slightly right-handed, with n values up to 2.12 residues per helix turn. Left-handed models were in the majority, and their n values were as large as –2.91. These results are consistent with known structures of cellulose and its derivatives. An exception comes from a heavily derivatized cellobiose molecule. It yields right-handed helices with n 4.5 and h 3 Å. Because one half turn of this helix reverses the direction of the chain in a compact region, the linkage geometry is a model for chain-folding. Other derivatives that are unable to form the O3O5 hydrogen bond gave left-handed helices. The puckering of the glucose rings was also surveyed. A number of rings in small molecule structures are puckered to a degree that is similar to the puckering determined for methyl cellotrioside, cellotetraose, cellulose I and cellulose II.     

Aggregation and solubility behavior of asphaltenes and their subfractions

Asphaltenes from four different crude oils (Arab Heavy, B6, Canadon Seco, and Hondo) were fractionated in mixtures of heptane and toluene and analyzed chemically, by vapor pressure osmometry (VPO), and by small angle neutron scattering (SANS). Solubility profiles of the asphaltenes and their subfractions indicated strong cooperative asphaltene interactions of a particular subfraction that is polar and hydrogen bonding. This subfraction had lower H/C ratios and modestly higher N, V, Ni, and Fe contents than the less polar and more soluble subfraction of asphaltenes. VPO and SANS studies indicated that the less soluble subfractions formed aggregates that were considerably larger than the more soluble subfractions. In general, asphaltene aggregate size increased with decreasing solvent aromaticity up to the solubility limit, beyond which the aggregate size decreased with heptane addition. The presence of a low wavevector Q feature in the scattering curves at 25 degrees C indicated that the individual aggregates were flocculating; however, the intensity of the feature was diminished upon heating of the samples to 80 degrees C. The solubility mechanism for Canadon Seco asphaltenes, the largest aggregate formers, appears to be dominated by aromatic pi-bonding interactions due to their low H/C ratio and low nitrogen content. B6 and Hondo asphaltenes formed similar-sized aggregates in heptol and the solubility mechanism is most likely driven by polar interactions due to their relatively high H/C ratios and high nitrogen contents. Arab Heavy, the least polar asphaltene, had a H/C ratio similar to Canadon Seco but formed the smallest aggregates in heptol. The enhancement in polar and pi-bonding interactions for the less soluble subfraction indicated by elemental analysis is reflected by the aggregate size from SANS. The less soluble asphaltenes contribute the majority of species responsible for aggregation and likely cause many petroleum production problems such as pipeline deposition and water-in-oil emulsion stabilization.     

Origin of enantioselection in chiral alcohol oxidation catalyzed by Pd[(-)-sparteine]Cl2

A kinetic investigation into the origin of enantioselectivity for the Pd[(-)-sparteine]Cl(2)-catalyzed aerobic oxidative kinetic resolution (OKR) is reported. A mechanism to account for a newly discovered chloride dissociation from Pd[(-)-sparteine]Cl(2) prior to alcohol binding is proposed. The mechanism includes (1) chloride dissociation from Pd[(-)-sparteine]Cl(2) to form cationic Pd(-)-sparteine]Cl, (2) alcohol binding, (3) deprotonation of Pd-bound alcohol to form a Pd-alkoxide, and (4) beta-hydride elimination of Pd-alkoxide to form ketone product and a Pd-hydride. Utilizing the addition of (-)-sparteine HCl to control the [Cl(-)] and [H(+)] and the resulting derived rate law, the key microscopic kinetic and thermodynamic constants were extracted for each enantiomer of sec-phenethyl alcohol. These constants allow for the successful simulation of the oxidation rate in the presence of exogenous (-)-sparteine HCl. A rate law for oxidation of the racemic alcohol was derived that allows for the successful prediction of the experimentally measured k(rel) values when using the extracted constants. Besides a factor of 10 difference between the relative rates of beta-hydride elimination for the enantiomers, the main enhancement in enantiodetermination results from a concentration effect of (-)-sparteine HCl and the relative rates of reprotonation of the diastereomeric Pd-alkoxides.     

Reaction-based machine learning representations for predicting the enantioselectivity of organocatalysts

Hundreds of catalytic methods are developed each year to meet the demand for high-purity chiral compounds. The computational design of enantioselective organocatalysts remains a significant challenge, as catalysts are typically discovered through experimental screening. Recent advances in combining quantum chemical computations and machine learning (ML) hold great potential to propel the next leap forward in asymmetric catalysis. Within the context of quantum chemical machine learning (QML, or atomistic ML), the ML representations used to encode the three-dimensional structure of molecules and evaluate their similarity cannot easily capture the subtle energy differences that govern enantioselectivity. Here, we present a general strategy for improving molecular representations within an atomistic machine learning model to predict the DFT-computed enantiomeric excess of asymmetric propargylation organocatalysts solely from the structure of catalytic cycle intermediates. Mean absolute errors as low as 0.25 kcal mol⁻¹ were achieved in predictions of the activation energy with respect to DFT computations. By virtue of its design, this strategy is generalisable to other ML models, to experimental data and to any catalytic asymmetric reaction, enabling the rapid screening of structurally diverse organocatalysts from available structural information.

A machine learning model for enantioselectivity prediction using reaction-based molecular representations.     

A comparison of SCF-Xα and extended Hückel methods for metal clusters

A comparison of some results from Xα-scattered wave (Xα-SW) and extended Hückel (EH) calculations for metal clusters is given. It is found that small clusters of atoms (≈ 13 atoms) using the Xα-SW method reproduce many of the features of the electronic structure of the bulk metals, whereas this is not the case for the same clusters using the EH method. A more systematic approach to EH parametrizations is suggested in order to make this method a more viable approach to treating metal clusters.     

Stereoselective association of binuclear metallacycles in coordination polymers

A series of structurally related binuclear metallacycles [Cd(NO(3))(2)L](2), where L is an angular exo-bidentate ligand, have been synthesized. Each metallacycle contains two coordinatively unsaturated, chiral metal centers within a single molecule, and the assembly of these metallacycles into polymeric framework structures has been studied systematically for the first time. Stereoselective homochiral association of [Cd(NO(3))(2)L](2) leads to the formation of helical coordination polymers, whereas meso type association results in nonhelical chain structures. The type of stereoselective aggregation depends on the conditions of self-assembly as well as on ligand functionality. Both helical and nonhelical polymeric complexes have been isolated for the metallacycle [Cd(NO(3))(2)(2,4'-pyacph)](2) (2,4'-pyacph = 2,4'-(4-ethynylphenyl)bipyridyl). Homochiral association results in the formation of helical [Cd(NO(3))]( infinity ) chains which link the binuclear [Cd(NO(3))(2)(2,4'-pyacph)](2) metallacycles into racemic two-dimensional sheets which contain both P and M [Cd(NO(3))]( infinity ) helices. In contrast, meso-association leads to the formation of nonhelical one-dimensional chains. It is shown that the product of homochiral association is predominately formed at room temperature and that of meso-association is generated at elevated temperatures. Thus, it may be concluded that the homochiral association appears to be energetically less favorable than the meso-association, a conclusion that has been confirmed by theoretical calculations of the crystal lattice energy. Several high-yield syntheses of bipyridyl-type ligands used for metallacyclic assembly are also reported.