Evaluation of the radioactivity in concrete from accelerator facilities

For evaluation of radioactivity induced in the concrete samples from accelerator facilities, the residual radioactivity in concrete sample, collected from seven accelerator facilities, was determined by γ-ray spectrometry. The tritium was extracted by the heating method using an IR furnace, and measured with a liquid scintillation counter. It was found that the major radioisotopes activated mainly by neutrons in the concrete samples were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs and ³H. The concentrations of radioactivities induced by thermal neutron capture are the highest at a depth of 10 cm in the concrete wall. The correlation between tritium, ⁶⁰Co and ¹⁵²Eu activity was investigated by measuring many concrete samples for seven accelerator facilities. The results indicate that their activities are strongly correlated with each other. So it would also be concluded that the total activity in shielding concrete could be estimated on the basis of the activities of ⁶⁰Co and ¹⁵²Eu.     

Lipase-catalyzed synthesis and curing of high-molecular-weight polyricinoleate

High-molecular-weight polyricinoleate, with an M(w) of 100,600, was enzymatically prepared by the polycondensation of methylricinoleate using immobilized lipase from Pseudomonas cepacia (IM-PC) in bulk in the presence of 4 A molecular sieves at 80 degrees C for 7 d. Polyricinoleate was a viscous liquid at room temperature with a glass transition temperature (T(g)) of -74.8 degrees C, showed no crystallinity and was biodegraded by activated sludge. Polyricinoleate was readily cured using a dicumyl peroxide at 170 degrees C for 30 min to produce a chloroform insoluble crosslinked polyricinoleate with a hardness of 50A using durometer A.     

A new synthesis of 7-substituted 2,3-bis(alkylthio)naphth[1,8-bc]-azepines using the tris(alkylthio)cyclopropenyl cation

7-Substituted 2,3-bis(isopropylthio)naphth[1,8-bc]azepines 3a-c were synthesized in good yields by the reactions of 5-substituted 1-naphthylamines 2a-c with tris(isopropylthio)cyclopropenylium perchlorate ( 1 ) in acetonitrile under reflux. This reaction proceeds through the facile ring opening of 1 , followed by the intermediary formation of iminium salts 5a-c and then intramolecular cyclization.     

Indirect measurement of secondary-particle distributions by an Au activation method at the KEK neutrino target station

Gold activation detectors were placed at nine positions on the inner wall of the KEK neutrino target station, and were exposed to secondary particles during approximately one month of machine operation. After exposure, the production rates of 19 spallation nuclides, which were produced in the Au activation detectors by nuclear reactions with different threshold energies, were determined by γ-ray spectrometry. Thus, it was indicated that the Au activation detector is a novel tool for obtaining the distribution of various secondary particles with high intensity and high energy.     

A highly stereocontrolled total synthesis of dysiherbaine

A total synthesis of dysiherbaine, a potent agonist of AMPA-KA type glutamate receptors, has been accomplished in completely stereocontrolled manner starting from tri-O-acetyl-D-galactal in 25 steps and in 3% overall yield.     

Size-selective photocatalytic reactions by titanium(IV) oxide coated with a hollow silica shell in aqueous solutions

A novel core-shell composite photocatalyst, commercially available titanium(IV) oxide (TiO(2)) particles directly incorporated into a hollow amorphous silica shell, was fabricated by successive coating of TiO(2) with a carbon layer and a silica layer followed by heat treatment to remove the carbon layer. The composite induced efficient photocatalytic reactions when relatively small substrates were used, such as methanol dehydration and decomposition of acetic acid, without any reduction in the intrinsic activity of original TiO(2), but did not exhibit efficient photocatalytic activity for decomposition of large substrates, methylene blue and polyvinyl alcohol. The unique size-selective properties of the composites are due to their structural characteristics, i.e., the presence of a pore system and a void space in the silica shell and between the shell and medial TiO(2) particles, respectively. The loading of alkylsilyl groups on the surface of the composite led to highly photostable floatability: the floated sample also induced efficient photocatalytic reaction for decomposition of acetic acid while retaining floatation at the gas/water interface.     

Enzymatic transformation of bacterial polyhydroxyalkanoates into repolymerizable oligomers directed towards chemical recycling

The enzymatic transformation into an oligomer was carried out with the objective of developing the chemical recycling of bacterial polyesters. Poly(R-3-hydroxyalkanoate)s (PHAs), such as poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyhexanoate)] and poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyvalerate)], were degraded by granulated Candida antarctica lipase B immobilized on hydrophilic silica (lipase GCA) in a diluted organic solvent at 70 degrees C. The degradation products were cyclic oligomers having a molecular weight of a few hundreds. The obtained cyclic oligomer was readily repolymerized by the same lipase (lipase GCA) to produce the corresponding polyester in a concentrated solution. The cyclic oligomer was copolymerized with epsilon-caprolactone using lipase to produce the corresponding terpolymers having an Mw of 21,000. This is the first example of the enzymatic chemical recycling of bacterial PHAs using lipase. Poly(R-3-hydroxybutyrate) [P(3HB)] was also degraded into the linear-type R-3HB monomer to trimer by P(3HB)-depolymerase (PHBDP) in phosphate buffer at 37 degrees C. The degradation using PHBDP required a longer reaction time compared with the lipase-catalyzed degradation in organic solvent. The monomer composition of the oligomer depended on the origin of the PHBDP. The R-3HB monomer was predominately produced by PHBDP from Pseudomonas stutzeri, while the R-3HB dimer was produced by PHBDP from Alcaligenes faecalis T1. Repolymerization of these oligomers by lipase in concentrated organic solvent produced a relatively low-molecular-weight P(3HB) (e.g., Mw=2,000). Degradation of P(3HB) by lipase in organic solvent into repolymerizable cyclic oligomer and degradation of P(3HB) by PHBDP in buffer into hydroxy acid type R-3HB dimer.     

Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Discovery of Hexagonal Structured Pd–B Nanocrystals

We report on hexagonal close-packed (hcp) palladium (Pd)–boron (B) nanocrystals (NCs) by heavy B doping into face-centered cubic (fcc) Pd NCs. Scanning transmission electron microscopy–electron energy loss spectroscopy and synchrotron powder X-ray diffraction measurements demonstrated that the B atoms are homogeneously distributed inside the hcp Pd lattice. The large paramagnetic susceptibility of Pd is significantly suppressed in Pd–B NCs in good agreement with the reduction of density of states at Fermi energy suggested by X-ray absorption near-edge structure and theoretical calculations.