Thioacylation reactions for the surface functionalization of phosphorus-containing dendrimers

The functionalization of phosphorus-containing dendrimers was easily achieved through thioacylation reactions involving new dendrimers capped with dithioester end groups and various functionalized amines. These reactions were successfully applied to the first generation (12 end groups) and the third generation of the dendrimer (48 end groups) and allowed their functionalization by various primary or secondary amines, alcohols, glycols, and azides. [reaction: see text]     

CoSm(SeO3)2Cl,CuGd(SeO3)2Cl,MnSm(SeO3)2Cl,CuGd2(SeO3)4 und CuSm2(SeO3)4: Übergangsmetallhaltige Selenite von Samarium und Gadolinum

CoSm(SeO₃)₂Cl, CuGd(SeO₃)₂Cl, MnSm(SeO₃)₂Cl, CuGd₂(SeO₃)₄ and CuSm₂(SeO₃)₄: Transition Metal containing Selenites of Samarium and Gadolinum The reaction of CoCl₂, Sm₂O₃, and SeO₂ in evacuated silica ampoules lead to blue single crystals of CoSm(SeO₃)₂Cl (triclinic, , Z = 4, a = 712.3(1), b = 889.5(2), c = 1216.2(2) pm, α = 72.25(1)°, β = 71.27(1)°, γ = 72.08(1)°, R_all = 0.0586). If MnCl₂ is used in the reaction light pink single crystals of MnSm(SeO₃)₂Cl (triclinic, , Z = 2, a = 700.8(2), b = 724.1(2), c = 803.4(2) pm, α = 86.90(3)°, β = 71.57(3)°, γ = 64.33(3)°, R_all = 0.0875) are obtained. Green single crystals of CuGd₂(SeO₃)₂Cl (triclinic, , Z = 4, a = 704.3(4), b = 909.6(4), c = 1201.0(7) pm, α = 70.84(4)°, β = 73.01(4)°, γ = 70.69(4)°, R_all = 0.0450) form analogously in the reaction of CuCl₂ and Gd₂O₃ with SeO₂. CoSm(SeO₃)₂Cl contains [CoO₄Cl₂] octahedra, which are connected via one edge and one vertex to infinite chains. The Mn²⁺ ions in MnSm(SeO₃)₂Cl are also octahedrally coordinated by four oxygen and two chlorine ligands. The linkage of the polyhedra to chains occurs exclusively via edges. Both, the cobalt and the manganese compound show the Sm³⁺ ions in eight and ninefold coordination of oxygen atoms and chloride ions. In CuGd(SeO₃)₂Cl the Cu²⁺ ions are coordinated by three oxygen atoms and one Cl^— ion in a distorted square planar manner. One further Cl^— and one further oxygen ligand complete the [CuO₃Cl] units yielding significantly elongated octahedra. The latter are again connected to chains via two common edges. For the Gd³⁺ ions coordination numbers of ?8 + 1”? and nine were found. Single crystals of the deep blue selenites CuM₂(SeO₃)₄ (M = Sm/Gd, monoclinic, P2₁/c, a = 1050.4(3)/1051.0(2), b = 696.6(2)/693.5(1), c = 822.5(2)/818.5(2) pm, β = 110.48(2)°/110.53(2)°, R_all = 0.0341/0.0531) can be obtained from reactions of the oxides Sm₂O₃ and Gd₂O₃, respectively, with CuO and SeO₂. The crystal structure contains square planar [CuO₄] groups and irregular [MO₉] polyhedra.     

SNAr reactions of β-substituted porphyrins and the synthesis of meso substituted tetrabenzoporphyrins

Reaction of 2,3,7,8,12,13,17,18-octaethylporphyrin with LiR reagents containing functional groups readily yields meso substituted derivatives suitable for further transformations with residues such as -p-C₆H₅Br, -p-C₆H₅-CCH, -p-C₆H₅-NH₂ or -(CH₂)₃-CHCH₂. Similar reactions of tetrabenzoporphyrin with alkyllithium reagents afforded the first entry into meso mono- and dialkylsubstituted tetrabenzoporphyrins while reaction of bicyclo[2.2.2]oct-type masked isoindole precursors with LiR followed by in situ retro-Diels-Alder reaction also afforded the 5-phenyl and 5,10-diphenyltetrabenzoporphyrins in high purity.     

Austauschreaktionen an komplexgebundenen liganden von elementen der IV. Hauptgruppe : III. Darstellung von halogen-, pseudohalogen- und hydridokomplexen des typs π-C5H5Fe(CO)2SiX3

The complexes CpFe(CO)₂SiBr₃, CpFe(CO)₂SiI₃, CpFe(CO)₂SiBr₂(OMe), and CpFe(CO)₂SiI(NH-cyclo-C₆H₁₁)₂ are prepared by the reaction of CpFe(CO)₂SiR₃ (R = OMe, NH-cyclo-C₆H₁₁) with HBr, HI and CH₃I. Treating CpFe(CO)₂SiCl₃ with a large excess of NaN₃, KOCN or KSCN yields the first tri-pseudohalogensilyl—transition-metal-complexes. The compounds are characterized by IR and mass spectra. A new method of preparation of the already known complex CpFe(CO)₂SiH₃ is described starting from CpFe(CO)₂SiCl₃ and LiAlH₄.     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

Genome-based proteomics

Protein-protein interactions play crucial roles in various biological pathways and functions. Therefore, the characterization of protein levels and also the network of interactions within an organism would contribute considerably to the understanding of life. The availability of the human genome sequence has created a range of new possibilities for biomedical research. A crucial challenge is to utilize the genetic information for better understanding of protein distribution and function in normal as well as in pathological biological processes. In this review, we have focused on different platforms used for systematic genome-based proteome analyses. These technologies are in many ways complementary and should be seen as various ways to elucidate different functions of the proteome.     

Synthesis and x-ray crystal structure of [(THF)Zn(O(2)(OH)SiR)](4) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))): enroute to larger aggregates

Reaction of aminosilanetriol RSi(OH)(3) (1) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) with diethyl zinc at room temperature in 1:1 stoichiometric ratio affords [(THF)Zn(O(2)(OH)SiR)](4) (2) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) in good yield. The single-crystal X-ray diffraction studies reveal that 2 is monoclinic, P2(1), with a = 17.117(3) A, b = 16.692(5) A, c = 17.399(4) A, alpha = gamma = 90 degrees, beta = 91.45(7) degrees, and Z = 2. The molecular structure of 2 contains two puckered eight-membered Zn(2)Si(2)O(4) rings, which are connected by the Zn-O bonds and form two planar four-membered Zn(2)O(2) rings. Compound 2 contains an unreacted hydroxyl group on each silicon atom, and hence, we carried out the reactions of 2 with dimethylzinc and methyllithium to form [Zn(4)(THF)(4)(MeZn)(4)(O(3)SiR)(4)] (3) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) and [(L)ZnLi(O(3)SiR)](4) (4) (L = 1,4-(Me(2)N)(2)C(6)H(4), R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))), respectively. This suggested that 2 could be an intermediate product formed during the synthesis of 3 and 4.     

Don't expect a consensus on hernia repair

Hernia surgery, a bread and butter operation for many hospitals, seems a likely candidate for streamlining, standardization, and package pricing. But there's no consensus on the best way to do hernia repairs. Surgeons differ vehemently on which approach is preferable. The mesh plug attracted attention this summer when its advocate, Ira Rutkow, MD, appeared on TV. But the patch, traditional open repair, and laparoscopy also have their advocates. Here's a look at the techniques and why you're unlikely to see consensus soon.