Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

Present state and future development of instrumental techniques for solution thermochemical (thermometric) analysis

A review of instruments for thermochemical (thermometric) solution analysis is given, including new types of isoperibol reaction of bomb calorimeters, the design of which can influence the future development of thermochemical measuring techniques. The new type of Dithermanal (Vaskut-EMG, Hungary, and Herrmann- Morris, France) controls the individual steps of the thermochemical analysis, adding memory and computing capabilities. Similar programming units with microprocessors for bomb and/or reaction calorimetry have been developed by Parr Comp. and Leco Comp. (USA). The latest modification of the Technicon flow analyzer permits on-line analysis of solid samples. For thermochemical titrations, the Sanda titrator (USA) and Vaskut automatic titrator (Hungary) are available. In the USA, the Tronac isothermal or isoperibol calorimeters are widely used. At the Technical University of Brno, ?SSR, smaller table instruments with a water-bath are applied for different modes of solution thermochemical analysis, and also for the reactions of solid samples in liquids. For the measurement of very small temperature differences, PTC thermistors are used. The possibilities of the future development of measuring techniques are outlined.     

Author index

The thermal decomposition of N₂H₅Nd(SO₄)₂·H₂O has been studied by simultaneous TG and DSC and by isothermal weight change determination. The final product and the intermediate phases have been identified by chemical analysis, X-ray powder patterns and infrared spectroscopy. The solid phases in the decomposition sequence are: N₂H₅Nd(SO₄)₂· H₂O → N₂H₅Nd(SO₄)₂ → NH₄Nd(SO₄)₂ → Nd₂(SO₄)₃. The reactions overlap under dynamicconditions, isothermally, however, NH₄Nd(SO₄)₂ can be obtained by 200°C.     

Atmospheric pressure electrospray ionization mass spectra of glucose and 2-fluorodeoxyglucose for quantitative analysis of 2-fluorodeoxyglucose by high-performance liquid chromatography

2-Fluoro-2-deoxy-D-glucose (FDG) labeled by fluorine-18 is the most widely used radiopharmaceutical for positron emission tomography (PET). For high-performance liquid chromatography (HPLC)/MS assay and quality control, the mass spectra of FDG and glucose (Glc) in organic + water solutions were studied by flow injection analysis (FIA) and in a chromatographic eluate. In acetonitrile (MeCN) + 0.025% ammonium formate (NH(4)HCO(2)) solvent (80 : 20), electrospray ionisation (ESI) of glucose-FDG provides M.NH(4)(+) and 2M.Na(+) (M = Glc or FDG) as the most intense positive ions. Formation of the latter ions and also of M.MeCN.Na(+) and 2MeCN. Na(+) is typical of the presence of NaCl in the ESI inlet. The positive ions include heavier ions corresponding to the impurities separated by HPLC and also to the cross-ring fragmentation of complexes (2FDG. aMeCNX)L, where a = 0 or 1, L is either Na(+) or NH(4)(+) and X is a fragmented pyranose or anhydropyranose residue. The second most abundant Glc negative ion is m/z = 359 which was interpreted as (2GlcH(+))(). The negative-ion spectrum of FDG has dominating lines due to FDG.HCO(2)() ions at m/z 227 and also (2FDGH(+))() at m/z 363. The m/z 363 signal is suppressed in the presence of NaCl at a molar ratio of 4 : 1 to NH(4)HCO(2), while the ions at m/z 217 and 219, i.e. FDG.Cl(), become three times more intense than FDG.HCO(2)(). The latter ion appears to be most suitable as an analytical signal for chemical analysis of FDG at m/z 226 and 227. Limits of FDG quantitation (LOQ) of 19 ng and 21 ng were found for the 200(+) and 227() ion signals, respectively, and are wholly adequate for verification of total FDG content in radiopharmaceuticals.     

Strukturelle Untersuchungen einiger neutraler Komplexe des zweiwertigen Molybdäns

Unit cell parameters have been calculated from x-ray powder diffraction data of Mo₂Br₄ Py ₄ (A), Mo₂I₄ Py ₄ (B), Mo₂I₄ Pic ₄ (C), Mo₂(SCN)₄ Py ₄ (D) and Mo₂(SCN)₄ Pic ₄ (E), A, B and C crystallize tetragonal. A witha=9,4₂,c=15,O₂ Å; B witha=9,4₆,c=14,9₈ Å and C witha=9,6₆ andc=15,7₂ Å D and E crystallize orthorhombic. D witha=10,0₉,b=9,1₄,c=15,0₈ Å; E witha=10,2₂,b=9,4₁ andc=15,1₅ Å.Py=pyridine,Pic=4-methylpyridine.

     

Determination of cadmium in mixtures with metal ions

A method for the determination of cadmium microamounts in mixtures with metallic ions withE _1/2 near toE _1/2 of cadmium is discussed. For higher selectivity cadmium was extracted in the form of the pyridin-thiocyanate complexes prior to polarography.

---

Bestimmung von Cadmium(II) neben anderen Metallionen

Zusammenfassung Es wird eine polarographische Methode zur Bestimmung von Cd(II) neben anderen Metallionen mitE _1/2 naheE _1/2(Cd) diskutiert. Zur Erhöhung der Selektivität und Genauigkeit wird eine Pyridin-Thiocyanat-Extraktion vorgeschalten.

     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

The modulating possibilities of dicarbollide clusters: optimizing the Kharasch catalysts

exo-Cluster dicarbollides substitution has allowed tuning of the E degrees (Ru(II)/Ru(III)) potential to obtain the best-performing Kharasch catalyst. We postulate that this is possible through the to-and-fro electron movement between the boron cluster and the sulfonium moieties.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.