An assessment of the impact of construction work on fine particulate matter in the University of Jordan: A PIXE study

Aerosol sampling was carried out prior to and during an active construction work at the University of Jordan in Amman, Jordan. Elemental characterization for 60 PM_2.5 samples was performed by particle-induced X-ray emission (PIXE) technique at the LABEC laboratory of INFN in Florence, Italy. Twenty three elements (Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Zr, Ba, and Pb) were detected, and their concentrations were assessed during three sampling periods, namely, “No Construction,” “Pouring Concrete,” and “Bleaching.” The results showed higher concentrations of soil-related elements and lower concentrations of anthropogenic-related elements during construction periods compared with their concentrations before construction. Soil-related elements showed very low enrichment factor (EF) and high correlation coefficients during all sampling periods. Anthropogenic-related elements were very much enriched and correlated only during the first sampling period “No Construction.”     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.     

Versatile coordination chemistry towards multifunctional carbon nanotube nanohybrids

Dispersible single-walled carbon nanotubes grafted with poly(4-vinylpyridine), SWNT-PVP, were tested in coordination assays with zinc tetraphenylporphyrin (ZnP). Kinetic and spectroscopic evidence corroborates the successful formation of a SWNT-PVPZnP nanohybrid. Within this SWNT-PVPZnP nanohybrid, static electron-transfer quenching (2.0+/-0.1) x 10(9) s(-1) converts the photoexcited-ZnP chromophore into a radical-ion-pair state with a microsecond lifetime, namely one-electron oxidized-ZnP and reduced-SWNT.     

Determination of hydrogen sulfide and volatile thiols in air samples by mercury probe derivatization coupled with liquid chromatography-atomic fluorescence spectrometry

A new procedure is proposed for the sampling and storage of hydrogen sulphide (H₂S) and volatile thiols (methanethiol or methyl mercaptan, ethanethiol and propanethiol) for their determination by liquid chromatography. The sampling procedure is based on the trapping/pre-concentration of the analytes in alkaline aqueous solution containing an organic mercurial probe p-hydroxymercurybenzoate, HO-Hg-C₆H₄-COO⁻ (PHMB), where they are derivatized to stable PHMB complexes based on mercury-sulfur covalent bonds. PHMB complexes are separated on a C₁₈ reverse phase column, allowing their determination by liquid chromatography coupled with sequential non-selective UV-vis (DAD) and mercury specific (chemical vapor generation atomic fluorescence spectrometry, CVGAFS) on-line detectors. PHMB complexes, S(PHMB)₂CH₃S-PHMB, C₂H₅S-PHMB and C₃H₇S-PHMB, are stable alt least for 12 h at room temperature and for 3 months if stored frozen (−20 °C).The best analytical figures of merits in the optimized conditions were obtained by CVGAFS detection, with detection limits (LODc) of 9.7 μg L⁻¹ for H₂S, 13.7 μg L⁻¹ for CH₃SH, 17.7 μg L⁻¹ for C₂H₅SH and 21.7 μg L⁻¹ for C₃H₇SH in the trapping solution in form of RS-PHMB complexes, the relative standard deviation (R.S.D.) ranging between 1.0 and 1.5%, and a linear dynamic range (LDR) between 10 and 9700 μg L⁻¹. Conventional UV absorbance detectors tuned at 254 nm can be employed as well with comparable R.S.D. and LDR, but with LODc one order of magnitude higher than AFS detector and lower specificity. The sampling procedure followed by LC-DAD-CVGAFS analysis has been validated, as example, for H₂S determination by a certified gas permeation tube as a source of 3.071 ± 0.154 μg min⁻¹ of H₂S, giving a recovery of 99.8 ± 7% and it has been applied to the determination of sulfur compounds in real gas samples (biogas and the air of a plant for fractional distillation of crude oil).     

Optimizing control of simulated moving bed separations of mixtures subject to the generalized Langmuir isotherm

Simulated moving bed (SMB) is a cost-efficient separation technique that offers high productivity and low solvent consumption. SMB has gained importance in the pharmaceutical and fine chemical industry to perform complex separation tasks. However, an open and challenging problem is the optimal, robust operation of the SMB process. We have developed a control scheme that integrates the optimization and control of the SMB unit. A significant feature of the controller is that only minimal information of the system has to be provided, i.e. the linear adsorption behavior of the mixture to be separated and the average void fraction of the columns. Therefore, a full characterization of the adsorption behavior of the mixture and the columns is no longer required. In this ‘cycle to cycle’ control scheme, the measurements, optimization and control actions are performed once in every cycle. This paper presents simulation results of the control scheme applied to the separation of binary mixtures characterized by generalized Langmuir isotherms. The results are presented and analyzed in the frame of the triangle theory that has been recently extended to encompass these types of isotherms. Besides, online optimum performance of the SMB unit is compared with off-line optimization carried out using genetic algorithm. The results show that the controller fulfills the product and process specifications while operating the SMB unit optimally, regardless of the different types of Langmuir isotherms that the systems exhibit.     

Charged molecular films on brownian particles: structure, interactions, and relation to stability

The interfacial film of physically adsorbed ionic amphiphilic molecules on submicron particles dispersed in water was studied by a combination of surface tension measurements, laser light scattering (LLS) and high-shear experiments in a microchannel. General features in the structure and morphology of the molecular film are identified and understood in the framework of the two-step Langmuir adsorption model deduced from the adsorption isotherm. On the basis of this approach, the phase transitions and structural ordering of the film at the solid-liquid interface are analyzed in detail. A novel methodology based on high-shear aggregation experiments subsequently analyzed by means of LLS is proposed and turns out to be able to provide significant information on the phase transitions and structural arrangements of the adsorbed molecules (in substantial agreement with the adsorption isotherm model) as well as on the resulting interactions. Particularly important for applications is the result that, with no added salt, the films on two particles can adhere/fuse, leading to aggregation as long as an uncovered (hydrophobic) patch is present (unsaturated molecular layers). In the opposite case of fully developed layers, by analyzing the mechanism of shear aggregation of charged particles in the low-salt limit, we show that, when the hydrophobic attraction is absent, short-range hydration repulsive forces dominate over Derjaguin-Landau-Verwey-Overbeek (DLVO) forces and adhesion can never be achieved even upon application of very high collision energies. Consistently, a lower limiting boundary for the hydration interaction is calculated and found to be in agreement with data in the literature.     

Free-radical reactions of diazonium salts with α,β-unsaturated carbonyl compounds. A new synthesis of 1,4-diarylpyrazole derivatives

Free-radical decomposition of diazonium salts catalyzed by titanous or titanous and ferrous salts in the presence of β-substituted α,β-unsaturated carbonyl compounds leads to 1,4-diarylpyrazole derivatives. The reaction occurs via an intermediate azo compound ( 1 ), which can be reduced by the metal salt or can be isolated and hydrogenated to pyrazole derivatives.     

Studies on simulated ageing of paper by photochemical degradation

The study of the ageing of two paper types was performed on monitoring it during a simulated process by means of the measure of the photocatalytic degradation of the paper cellulose. Such evaluation was possible due to the combined responses of a photosensor based on titanium dioxide in suspension, of an enzymatic biosensor based on superoxide dismutase (SOD), of a specific conductivity sensor and of an enzymatic biosensor based on glucose oxidase.