Isolation and Identification of Bioactive Compounds from Bidens spp. Using HPLC-DAD and GC-MS Analysis and Their Biological Activity as Anticancer Molecules

The genus Bidens a member of family Compositae, is widely documented as an ethno-medicinally important genus of plants. In the present study, anticancer potential of three ethno-medicinally important species i.e., B. bipinnata, B. biternata and B. pilosa were tested. For in-vitro evaluation, an MTT (Thiazolyl blue tetrazolium bromide) assay was performed against cervical cancer cells (HeLa), hepatocellular carcinoma (HepG), and adenocarcinoma human alveolar basal epithelial cells (A549). For in vivo evaluation, Artemia salina, Danio rerio, and Caenorhabditis elegans were used. Among all the tested extracts, the ethanol extract of B. biternata appeared to have highest anticancer activity, and the compounds responsible for this activity were identified to be Tris (2,4-di-tert-butylphenyl), 4-hydroxy-2,4′-dimethoxychalcone, and 2,4-di-tert-butylphenol. This is the first report of the isolation of Tris (2,4-di-tert-butylphenyl) phosphate from the genus Bidens and the first report of 4-hydroxy-2,4′-dimethoxychalcone and 2,4-di-tert-butylphenol from B. biternata. Among the isolated compounds, 4-hydroxy-2,4′-dimethoxychalcone showed the highest anticancer activity with an LD50 value of 236.7 µg/mL. Therefore, this compound carries promising potential for being established as a pharmaceutical for chemoprevention and chemotherapy.     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Synthesis of 3-methoxyazetidines via an aziridine to azetidine rearrangement and theoretical rationalization of the reaction mechanism

The synthetic utility of N-alkylidene-(2,3-dibromo-2-methylpropyl)amines and N-(2,3-dibromo-2-methylpropylidene)benzylamines was demonstrated by the unexpected synthesis of 3-methoxy-3-methylazetidines upon treatment with sodium borohydride in methanol under reflux through a rare aziridine to azetidine rearrangement. These findings stand in contrast to the known reactivity of the closely related N-alkylidene-(2,3-dibromopropyl)amines, which are easily converted into 2-(bromomethyl)aziridines under the same reaction conditions. A thorough insight into the reaction mechanism was provided by both experimental study and theoretical rationalization.     

Determination of carbaryl by flow injection with luminol chemiluminescence inhibition detection

A flow-injection procedure is described for the determination of carbaryl based on its inhibition effect on luminol-cobalt(II) chemiluminescence reaction in alkaline medium in the presence of hydrogen peroxide. The calibration data over the range 5.0?×?10^?7 to 20?×?10^?6?M give a correlation coefficient (r ²) of 0.9972 with relative standard deviations (RSD; n?=?4) in the range of 1.0–2.1% with a limit of detection (3?×?blank noise) of 2.37?×?10^?7?M for carbaryl. The sample throughput was 120?h^?1. The effects of some carbamates, anions, and cations were studied on luminol CL system for carbaryl determination. The proposed method has been applied to determine carbaryl in natural waters.     

Analysis of tamoxifen and its main metabolites in plasma samples of breast cancer survivor female athletes: Multivariate and chemometric optimization

A sensitive method based on liquid chromatography combined with a diode array detector was developed and validated to simultaneously determine tamoxifen, and its active metabolites N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen in human plasma samples. The green and sustainable vortex-assisted dispersive liquid-phase microextraction technique based on the natural hydrophobic deep eutectic solvent was used for the extraction and preconcentration of the analytes. Chemometrics and multivariate analysis were used to optimize the independent variables including the type and volume of deep eutectic solvent, extraction time, and ionic strength. Under optimal conditions, calibration curves were linear in a suitable range with the lower limits of quantification (0.8–10.0 μg/L), which covered the relevant concentrations of the analytes in plasma samples for a clinical study. Intra- and interday precision evaluated at three concentrations for the analytes were lower than 8.2 and 12.1%, respectively. Accuracy was in the range of 94.9–104.7%. The applicability of the developed method on human plasma samples illustrated the range 45.1–72.8, 98.4–128.3, 0.9–1.2, and 2.7–6.1 μg/L for tamoxifen, N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen, respectively. The validated method can be effective for the pharmacokinetics, pharmacodynamics, and therapeutic drug monitoring studies of tamoxifen and its main metabolites in biological fluids.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Studies of the formation of all-carbon quaternary centres, en route to lyngbyatoxin A. A comparison of phenyl and 7-substituted indole systems

Copper mediated allylic substitutions and conjugate additions to geranyl, cinnamyl and allylic indole compounds have been investigated with the aim of finding a method for the creation of the all-carbon quaternary centre present in the natural product lyngbyatoxin A. Reaction conditions have been found giving a 68% SN2' selectivity in the copper mediated addition of PhMgBr to geranyl chloride, as well as 99% and 95% SN2' selectivity in the copper catalysed addition of EtMgBr to cinnamyl chloride and acetate, respectively. When the optimised reaction conditions were applied to the corresponding allylic compounds containing a 7-substituted indole moiety, the regioselectivity was reversed giving only the SN2 product. The allylic indole-containing substrates were also found to be unproductive in Pd- or Mo-catalysed SN2'-type substitution reactions. In related studies, copper catalysed conjugate addition of EtMgBr to the tricyclic lactam 6-methyl-pyrrolo[3,2,1-ij]quinolin-4-one gave a maximum of 20% of the 1,4-addition product.     

Synthesis of Tricyclic beta-Methylene Spiro Lactones Related to Bakkenolides by Successive Radical Cyclization-High Pressure Diels-Alder Reactions

The synthesis of some novel bakkenolides and their epi-spiro analogues was achieved by a new approach. Photolysis of allyl 1-(phenylseleno)-2-oxocyclopentanecarboxylates 7-9 afforded the corresponding spiro lactones 10-12 by radical cyclization via group transfer of the phenylseleno group. Selenoxide elimination of 11 and 12 produced the corresponding beta-methylene lactones 14 and 15. Diels-Alder cycloaddition of lactone11 with piperylene failed at ambient pressure, but proceeded in generally good yield in the presence of various Lewis acids at pressures of ca. 16 kbar, to give mixtures of beta-exo, alpha-endo, and beta-endo cycloadducts 19, 21, and 23, respectively. The preponderance of endo products 21 and 23, formed via highly hindered, but more compact, transition states was attributed to the high pressure and resulted in trans-dimethyl configurations of the products. The facial selectivity was dependent upon the Lewis acids, and the greatest alpha:beta ratio was observed with catalysts of the type TiCl(2)(OR)(2). Epimerization of the C-4 methyl group in 21 and 23 to furnish the corresponding cis-dimethyl analogues was achieved via exo-epoxidation, regioselective reduction, oxidation to the corresponding 3-keto derivatives, and base-catalyzed equilibration, thereby affording (+/-)-3,6-dioxobakkenolide-A (39) and its epi-spiro derivative 28, respectively. When the radical cyclization step was performed subsequent to the Diels-Alder cycloaddition by photolysis of perhydrindane 43, only the epi-spiro product 44 was obtained.     

A New,Mild, and Rapid Transformation of Acylals to Bisulfites in One-Pot Synthesis by Bismuth (III) Nitrate Pentahydrate

Abstract

Direct conversion of acylals to the corresponding bisulfites can be easily performed in the presence of bismuth (III) nitrate pentahydrate in ethanol at room temperature in good yields.