Interpretation of the Role of Composition on the Inclusion Efficiency of Monovalent Cations into Cobalt Hexacyanoferrate

Cobalt hexacyanoferrate of various compositions was prepared in flow mode and the role of the vacancy on the structure, thermogravimetric (TG) properties, and the adsorption efficiency was studied. The material, Na_yCo[Fe(CN)₆]_1−x ⋅ z H₂O, with a minimum vacancy of x=0.014 to the highest x=0.47, was obtained. The TG-differential scanning calorimetry (DSC) profile showed a distinct influence of the vacancy on the water release temperature. Materials with x>0.35 showed a smooth release of water at a relatively lower temperature. However, for the materials with x<0.35, water release took place in multiple steps, suggesting the existence of various forms of water. The FTIR profiles supported the existence of free and bonded water molecules. However, the materials with multiple water peaks in the FTIR spectra showed a shift of the major XRD peaks when heated at 285 °C in N₂ atmosphere. Regarding the effect of the vacancy on the adsorption behavior, for NH₄, the adsorption was found to be proportional to the number of Na atoms in the material, confirming the ion-exchange process. On the contrary, the materials with low vacancy and high Na content showed nominal Cs adsorption capacity. Interestingly, the K adsorption capacity was found to be in between that of the other two ions. This means the ionic size decides the rate of placement into the interstitial sites. For larger ions like Cs, the ease of percolation via the vacancy decides the overall adsorption efficiency.     

A novel separation technique of diastereomeric esters of pyridylethanols by extraction: formal total synthesis of PNU-142721, HIV-1 reverse transcriptase inhibitor

The separation of diastereomeric esters derived from (±)-pyridylethanols and 3β-acetoxyetienic acid were achieved by an extraction technique using diethyl ether and aqueous hydrochloric acid. A formal total synthesis of PNU-142721 was effectively carried out to prepare the chiral, non-racemic synthon 1-furo[2,3-c]pyridin-5-yl-ethanol (1) by means of this technique. The structure optimized using MOPAC calculations on each diastereomer suggested the presence of intramolecular CH/π interaction in only the (S)-isomer of the diastereomers.     

General and practical catalytic enantioselective Strecker reaction of ketoimines: significant improvement through catalyst tuning by protic additives

Significant improvement in enantioselectivity and catalyst activity was achieved for the catalytic enantioselective Strecker reaction. Using a catalyst (1-2.5 mol %) prepared from Gd(OⁱPr)₃ and d-glucose derived ligand 1, and in the presence of 2,6-dimethylphenol as an additive, high enantioselectivity was obtained from a wide range of ketoimines, including heteroaromatic and cyclic ketoimines. The new method was applied to an efficient catalytic asymmetric synthesis of sorbinil, a therapeutic agent for diabetic complications.     

Desymmetric hydrogenation of a meso-cyclic acid anhydride toward biotin synthesis

Catalytic reactivity in the hydrogenation of a cyclic anhydride to a biotin synthetic intermediate has been investigated on the basis of Lyons’ original method using Wilkinson Ru complex, revealing the high performance of DPPF and XANTPHOS diphosphines possessing wide bite angles. The results have shown a new trail for design of the corresponding asymmetric catalysts, and the potential utility of (S,S)-Et-FerroTANE and (S,S)-(R,R)-Ph-TRAP has been demonstrated.     

Photocatalytic oxidation of 2-propanol under visible light irradiation on TiO<Subscript>2</Subscript> thin films prepared by an RF magnetron sputtering deposition method

Visible light-responsive TiO₂ (Vis-TiO₂) thin films able to absorb UV and visible light in wavelength regions of 250–600 nm were successfully developed by applying a radio-frequency magnetron sputtering deposition method. These Vis-TiO₂ thin films exhibited high activity for the photocatalytic oxidation of 2-propanol diluted in water even under visible light irradiation (λ ≥ 450 nm). The photocatalytic activity of Vis-TiO₂ thin films was dramatically enhanced by the deposition of Pt particles on the surface. Secondary ion mass spectrometry measurements revealed that Pt particles are distributed from the top surface to the deep bulk of Vis-TiO₂ thin films with a columnar structure. The unique columnar structure of Vis-TiO₂ thin films plays an important role in the high photocatalytic performance.     

Phenolic compounds from the aerial parts of Diplomorpha canescens

One new C-methyl flavanone glucoside, farrerol 4'-O-β-D-glucopyranoside (1) was isolated from the aerial parts of Diplomorpha canescens (MEISN.) C. A. MEYER. Fourteen known phenolic compounds such as farrerol (2), luteolin 7-methyl ether 5-O-β-D-glucopyranoside (3), (-)-pinoresinol (4), (-)-lariciresinol (5), (-)-dihydrosesamin (6), (±)-dehydrodiconiferyl alcohol (7), rutarensin (8), umbelliferone (9), coniferyl aldehyde (10), sinapyl aldehyde (11), p-coumaric acid methyl ester (12), p-hydroxybenzaldehyde (13), p-hydroxyacetophenone (14) and syringaldehyde (15) were also isolated for the first time from this plant. Structure of 1 was determined on the basis of spectroscopic data including two dimensional (2D)-NMR, circular dichroism (CD) and by the application of Klyne's rule.     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.