Synthesis and DNA‐binding properties of 1,10‐phenanthroline analogues as intercalating‐crosslinkers

We synthesized a series of bis(bromomethyl)‐1,10‐phenanthrolines as novel anticancer lead compounds and examined their DNA‐binding properties. 5,6‐Bis(bromomethyl)‐1,10‐phenanthroline showed DNA intercalating activity and DNA crosslinking activity, furthermore it is stable in aqueous solution.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Enantioselective C--C bond formation to sulfonylimines through use of the 2-pyridinesulfonyl group as a novel stereocontroller

Enantioselective C--C bond formation to 2-pyridinesulfonylimines afforded products with good enantioselectivity. Dynamic induction of chirality on the sulfur by coordination of a chiral Lewis acid to the pyridine nitrogen and one of the prochiral sulfonyl oxygens induces enantioselectivity. Since the 2-pyridinesulfonyl group can easily be removed after the reaction, it acts not only as an activating group but also as an efficient stereocontroller.     

Size‐Dependence of the Activity of Gold Nanoparticle‐Loaded Titanium(IV) Oxide Plasmonic Photocatalyst for Water Oxidation

Mesoporous TiO₂ nanocrystalline film was formed on fluorine‐doped tin oxide electrode (TiO₂/FTO) and gold nanoparticles (NPs) of different sizes were loaded onto the surface with the loading amount kept constant (Au/TiO₂/FTO). Visible‐light irradiation (λ>430 nm) of the Au/TiO₂/FTO photoanode in a photoelectrochemical cell with the structure of photoanode|0.1 m NaClO4 aqueous solution|Ag/AgCl (reference electrode)|glassy carbon (cathode) leads to the oxidation of water to oxygen (O₂). We show that the visible‐light activity of the Au/TiO₂/FTO anode increases with a decrease in Au particle size (d) at 2.9≤d≤11.9 nm due to the enhancement of the charge separation and increasing photoelectrocatalytic activity.     

Magnetically Alignable Bicelles with Unprecedented Stability Using Tunable Surfactants Derived from Cholic Acid

Five novel surfactants were prepared by modifying the three hydroxy groups of sodium cholate with triethylene glycol chains endcapped with an amide ( SC‐C₁ , SC‐ ⁿ C₄ , and SC‐ ⁿ C₅ ) or a carbamoyl group ( SC‐O ⁿ C₄ and SC‐O ^t C₄ ). The phase behavior of aqueous mixtures of these surfactants with 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphatidylcholine (DMPC) was systematically studied by ³¹P NMR spectroscopy. The surfactants endcapped with carbamate groups ( SC‐O ⁿ C₄ and SC‐O ^t C₄ ) formed magnetically alignable bicelles over unprecedentedly wide ranges of conditions, in terms of temperature (from 21–23 to >90 °C), lipid/surfactant ratio (from 5 to 8), total lipid content (5–20 wt %), and lipid type [DMPC, 1,2‐dilauroyl‐sn‐glycero‐3‐phosphatidylcholine (DLPC), or 1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phosphatidylcholine (POPC)]. In conjunction with appropriate phospholipids, the carbamate‐endcapped surfactants afforded unique bicelles, characterized by exceptional thermal stabilities (from 0 to >90 °C), biomimetic lipid compositions (DMPC/POPC=25:75 to 50:50), and extremely large ²H quadrupole splittings (up to 71 Hz).     

Nanostructural control of cup-stacked carbon nanotubes with 1-benzyl-1,4-dihydronicotinamide dimer via photoinduced electron transfer

The photoinduced electron-transfer reduction of cup-stacked carbon nanotubes (CSCNTs) with 1-benzyl-1,4-dihydronicotinamide dimer [(BNA)2] results in the electrostatic destacking of CSCNTs to afford CSCNTs with uniform size.     

Determination of vanillin and related flavor compounds in cocoa drink by capillary electrophoresis

In the first part of this study, the stability of five terpenes (alpha-pinene, limonene, camphor, citronellol, and carvacrol) under subcritical water conditions was investigated. The stability studies were carried out at four different temperatures (100, 150, 200, and 250 degrees C) with two different heating times (30 and 300 min). When water temperature was increased, the degradation of terpenes became more serious. Prolonged exposure time to each heating temperature also caused decreased terpene stability. The terpene recoveries were determined by conducting subcritical water extraction of sand spiked with terpenes. The recoveries are typically around 70 to 80% for extractions at 100 degrees C. Terpene recoveries were decreased with increasing water temperature due to poorer stability of terpenes. After the degradation and recovery studies, basil and oregano leaves were extracted using water at both 100 and 150 degrees C. The concentrations of each individual terpene in the water extract generally ranged from trace quantity to 65 microg terpene/g herb. However, the concentration of carvacrol in the oregano-water extract at 150 degrees C was found to be as high as 4270 microg carvacrol/g oregano.     

High-field 1H MAS and 15N CP-MAS NMR studies of alanine tripeptides and oligomers: distinction of antiparallel and parallel beta-sheet structures and two crystallographically independent molecules

beta-Strand peptides are known to assemble into either antiparallel (AP) or parallel (P) beta-sheet forms which are very important motifs for protein folding and fibril formations occurring in silk fibroin or amyloid proteins. Well-resolved 1H NMR signals including NH protons were observed for alanine tripeptides (Ala)3 with the AP and P structures as well as (Ala)n (n = 4-6) by high-field/fast magic-angle spinning NMR. Amide NH and amino NH3+ 1H signals of (Ala)3 with the P structure were well resonated at 7.5 and 8.9 ppm, respectively, whereas they were not resolved for the AP structure. Notably, NH 1H signals of (Ala)3 and (Ala)4 taking the P structure are resonated at higher field than those of the AP structure by 1.0 and 1.1 ppm, respectively. Further, NH 15N signals of (Ala)3 with the AP structure were resonated at lower field by 2 to 5 ppm than those of (Ala)3 with the P structure. These relative 1H and 15N hydrogen bond shifts of the P structure with respect to those of the AP structure are consistent with the relative hydrogen bond lengths of the interstrand N-H...O=C bonds. Distinction between the two crystallographically independent chains present in the AP and P structures was feasible by 15N chemical shifts but not by 1H chemical shifts because of insufficient spectral resolution in the latter. Calculated 1H and 15N shielding constants by density functional theory are generally consistent with the experimental data, although some discrepancies remain depending upon the models used.     

New synthetic method to 1,2-benzisothiazoline-3-one- 1,1-dioxides and 1,2-benzisothiazoline-3-one-1-oxides from N-alkyl(o-methyl) arenesulfonamides

Various N-alkylsaccharins were easily prepared in moderate to good yields by the reaction of N-alkyl(o-methyl)arenesulfonamides with (diacetoxyiodo)benzene in the presence of iodine under irradiation with a tungsten lamp (W-hν). On the other hand, irradiation of N-alkyl(o- methyl)arenesulfonamide derivatives bearing various subslituents on the aromatic ring with a high- pressure mercury lamp (Hg-hν), in the presence of (diacetoxyiodo)benzene and iodine gave the corresponding N-alkyl-1,2-benzisothiazoline-3-one-1-oxide derivatives in moderate yields, together with N-alkyl-1,2-benzisothiazoline-3-one-1,1-dioxide (saccharin) derivatives.     

Stochastic path-integral method for chemical reaction dynamics: Application to the full 3D H3 system

A stochastic path-integral (SPI) technique for chemical reaction dynamics is explored. It is shown that this technique enables the direct computation of the transition amplitude with a finite space-time range, by generating a set of classical paths subject to simultaneous stochastic differential equations. The numerical values of the Boltzmann matrix elements for a harmonic potential are in good agreement with the analytical ones. Within the quantum transition state theory, the flux-flux autocorrelation function is also evaluated at 630 K for the H + H₂ exchange reaction and is found to give a satisfactory agreement with the previous studies. To appraise the influence of the dimensionality, both one-dimensional Eckart potential and a full three-dimensional (3D) Liu-Siegbahn-Truhlar-Horowitz (LSTH) potential calculations have been performed. The calculated values of the Boltzmann matrix elements for the colinear and the full 3D cases are found to deviate slightly from each other in the lower temperature range. The 3D thermal rate constant is in very good agreement with the previous one. © 1996 John Wiley & Sons, Inc.