Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Incipient structural and vibrational relaxation process of photolyzed carbonmonoxy myoglobin: statistical analysis by perturbation ensemble molecular dynamics method

The incipient structural and vibrational energy relaxation process of photolyzed carbonmonoxy myoglobin was analyzed by the perturbation ensemble molecular dynamics (PEMD) method, in which many pairs of perturbed and unperturbed MD simulations are executed for ensemble-averaging to obtain statistically significant results by canceling out thermal fluctuations. First, we have shown that the experimentally reported anisotropic expansion can be detected within a picosecond after photolysis. The good agreement between the experimental and computational results indicates that the PEMD method can predict legitimately those changes driven by perturbations even if the changes might be subtle and smaller than thermal fluctuations. Second, the structural relaxation including the ??clamshell rotation?? in E and F helices was successfully analyzed. The high time resolution analysis has clarified the incipient structural dynamics on a subpicosecond timescale: the clamshell rotation starts at His64, Val68, and His93 following both the heme doming and the dissociated CO ligand collision. Third, the vibrational energy relaxation from the heme to the globin matrix is elucidated not only temporally but also spatially. This is the first ??thorough?? report of the spacetime-resolved excess kinetic energy redistribution of photolyzed MbCO in the globin matrix with a statistically significant precision, ±1?K. The incipient anisotropic vibrational relaxation occurs clearly within a picosecond in the direction perpendicular to the heme plane by the ??through-bond?? and ??through-projectile?? pathways, and the isotropic relaxation then follows by the ??through-space?? pathway. Finally, it is concluded that the PEMD method is a powerful tool to understand the incipient relaxation process driven by the perturbation.     

Synthesis and DNA‐binding properties of 1,10‐phenanthroline analogues as intercalating‐crosslinkers

We synthesized a series of bis(bromomethyl)‐1,10‐phenanthrolines as novel anticancer lead compounds and examined their DNA‐binding properties. 5,6‐Bis(bromomethyl)‐1,10‐phenanthroline showed DNA intercalating activity and DNA crosslinking activity, furthermore it is stable in aqueous solution.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Effect of co-adsorbed CO and reaction temperature on the dynamics of N2 desorption under steady-state N2O-CO reaction on Rh(110)

We have investigated the effect of co-absorbed CO and reaction temperature on the angular distribution of N(2) desorption by N(2)O decomposition under the steady state of N(2)O-CO reaction on Rh(110). Spatial distributions of desorbing product N(2) emission have been measured at various surface temperatures and CO coverages. The decomposed N(2) collimates at 48°-61° off normal in the parallel plane to [001] and [110] directions, indicating that adsorbed N(2)O just before the decomposition is oriented along the [001] direction. Although the inclined and collimated N(2) desorption is always observed at any steady-state CO coverage and reaction temperature, the shape of the collimated N(2) distribution varied dependent on the co-adsorbed CO coverage. The distribution becomes sharp and shifts toward the surface normal direction with increasing CO coverage. These effects of adsorbed CO on the angular distribution of N(2) are interpreted by the collision of desorbed N(2) with co-adsorbed CO.     

Importance of sialic acid residues illuminated by live animal imaging using phosphorylcholine self-assembled monolayer-coated quantum dots

Glycans are expected to be one of the potential signal molecules for controlling drug targeting/delivery or long-term circulation of biopharmaceuticals. However, the effect of the carbohydrates of artificially glycosylated derivatives on in vivo dynamic distribution profiles after intravenous injection of model animals remains unclear due to the lack of standardized methodology and a suitable platform. We report herein an efficient and versatile method for the preparation of multifunctional quantum dots (QDs) displaying common synthetic glycosides with excellent solubility and long-term stability in aqueous solution without loss of quantum yields. Combined use of an aminooxy-terminated thiol derivative, 11,11'-dithio bis[undec-11-yl 12-(aminooxyacetyl)amino hexa(ethyleneglycol)], and a phosphorylcholine derivative, 11-mercaptoundecylphosphorylcholine, provided QDs with novel functions for the chemical ligation of ketone-functionalized compounds and the prevention of nonspecific protein adsorption concurrently. In vivo near-infrared (NIR) fluorescence imaging of phosphorylcholine self-assembled monolayer (SAM)-coated QDs displaying various simple sugars (glyco-PC-QDs) after administration into the tail vein of the mouse revealed that distinct long-term delocalization over 2 h can be achieved in cases of QDs modified with α-sialic acid residue (Neu5Ac-PC-QDs) and control PC-QDs, while QDs bearing other common sugars, such as α-glucose (Glc-PC-QDs), α-mannose (Man-PC-QDs), α-fucose (Fuc-PC-QDs), lactose (Lac-PC-QDs), β-glucuronic acid (GlcA-PC-QDs), N-acetyl-β-D-glucosamine (GlcNAc-PC-QDs), and N-acetyl-β-D-galactosamine (GalNAc-PC-QDs) residues, accumulated rapidly (5-10 min) in the liver. Sequential enzymatic modifications of GlcNAc-PC-QDs gave Galβ1,4GlcNAc-PC-QDs (LacNAc-PC-QDs), Galβ1,4(Fucα1,3)GlcNAc-PC-QDs (Le(x)-PC-QDs), Neu5Acα2,3Galβ1,4GlcNAc-PC-QDs (sialyl LacNAc-PC-QDs), and Neu5Acα2,3Galβ1,4(Fucα1,3)GlcNAc-PC-QDs (sialyl Le(x)-PC-QDs) in quantitative yield as monitored by direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry analyses. Live animal imaging uncovered for the first time that Le(x)-PC-QDs also distributed rapidly in the liver after intravenous injection and almost quenched over 1 h in similar profiles to those of LacNAc-PC-QDs and Lac-PC-QDs. On the other hand, sialyl LacNAc-PC-QDs and sialyl Le(x)-PC-QDs were still retained stably in the whole body after 2 h, while they showed significantly different in vivo dynamics in the tissue distribution, suggesting that structure/sequence of the neighboring sugar residues in the individual sialyl oligosaccharides might influence the final organ-specific distribution. The present results clearly visualize the evidence of an essential role of the terminal sialic acid residue(s) for achieving prolonged in vivo lifetime and biodistribution of various glyco-PC-QDs as a novel class of functional platforms for nanomaterial-based drug targeting/delivery. A standardized protocol using multifunctional PC-QDs should facilitate live animal imaging of ligand-displayed QDs using versatile NIR fluorescence photometry without influence of size-dependent accumulation/excretion pathway for nanoparticles (e.g., viruses) >10 nm in hydrodynamic diameter by the liver.     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Novel synthesis of zerumbone-pendant derivatives and their biological activity

Zerumbone 1, having powerful latent reactivity and containing two conjugated double bonds and a double conjugated carbonyl group is the major component of the essential oil of wild ginger, Zingiber zerumbet Smith. The conjugation system plays an important role in the expression of biological activity. N-Bromosuccinimide (NBS) reaction of 1 gave high reactive intermediate 2 with an exo-methylene group, which was obtained from 1 quantitatively. Treatment of 2 with nucleophiles gave various zerumbone-pendant derivatives, including C–H, C–O, C–N, and C–C bond formation, maintaining the conjugation system through S_N2′-type reaction. Almost all zerumbone-pendant derivatives showed a good value of IC₅₀ against the suppressive effect of NO generation. Among them, amine derivative 5, binding with 2 mol of zerumbone, showed the strongest activity (IC₅₀: 0.24 μM).     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551