Tube radical distribution chromatography (TRDC) uses an untreated open tubular capillary tube and a ternary mixture of solvents (water and hydrophilic/hydrophobic organic solvents) as a carrier solution. A model analyte mixture comprising 1-naphthol, 1-naphthoic acid, 1-naphthalenesulfonic acid, 2,6-naphthalenedisulfonic acid, and 1,3,6-naphthalenetrisulfonic acid was examined by the TRDC and capillary zone electrophoresis (CZE) systems that comprised mainly a capillary tube and a detector. In the TRDC system the elution order of analytes could be changed by altering the component ratios of the solvents, whereas in the CZE system the elution order was changed by altering the electroosmotic flow direction. The experimental data obtained provide clues about the features and utility of TRDC as a new separation method. 相似文献
Abstract In order to elucidate the initiation reaction of the photopolymerization with iron(III)-amine-carbon tetrachloride systems, the photochemical reaction process among iron(III), amine, and carbon tetrachloride in methanol solution was followed at 0°C by UV spectroscopy as for iron(III) ion. The rate constants of both the reduction of iron (III) under irradiation with light and the oxidation of iron(II) in the dark were measured, and were related to the rates of photopolymerization of methyl methacrylate. Kinetic study on the photopolymerization of methyl methacrylate with iron(III)-triethylenetetramine-carbon tetrachloride system was made in parallel in methanol solution at 0°C. The initiation mechanism of the photopolymerization was postulated. 相似文献
As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts. 相似文献
A synthetic study of kosinostatin aglycone is reported. Synthesis of key intermediate lactone 3, which corresponds to the BCDE ring fragment, was accomplished, and the precursor BCD ring fragment 5 was synthesized via two routes. First, 5 was synthesized from 2,5-dimethoxybenzaldehyde 16 by the combination of typical known transformations including efficient application of non-aqueous OsO4 oxidation in the presence of PhB(OH)2. However the synthesis required 15 long steps, and its main difficulty was ortho-alkoxycarbonylmethylation of 1-naphthol. Next we attempted to apply our recently developed alkoxycarbonylmethylation of diazonaphthoquinone for the synthesis of 5, and 5 was successfully synthesized in 9 steps from the same starting compound 16. Finally, 5 was stereoselectively converted to lactone 3 via trifluoroacetic acid-mediated cyclization of the 3,4-epoxycylohexanecarboxylic acid derivative. 相似文献
We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO3; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.
A certified reference material (CRM) for the determination of perfluorooctanoic acid (PFOA) has been issued as NMIJ CRM 4056-a by the National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Purity (kg kg?1) based on a titration method was determined by subtracting the mass fractions of impurities measured using liquid chromatography/mass spectrometry (LC/MS) from those of acids expressed as PFOA measured by a neutralization potentiometric titration. To validate an obtained result, purity based on a mass balance method was determined by subtracting the mass fractions of impurities, measured using LC/MS, Karl-Fischer titration (KFT), and vacuum evaporation, from 1 kg kg?1. Results from both titration and mass balance methods were in agreement within the accepted limits of uncertainty. The certified purity of NMIJ CRM 4056-a was determined to be 0.959 kg kg?1, calculated as the mean of the results obtained with the two methods. The standard uncertainty of the certified purity was evaluated from purity evaluations as well as from sample homogeneity and stability obtained from LC/MS and KFT analyses. Consequently, the expanded uncertainty was estimated to be 0.005 kg kg?1 with a coverage factor of k = 2. 相似文献
Single-ligand-based electronically conductive porous coordination polymers/metal–organic frameworks (EC-PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π-conjugated EC-MOF containing copper units with mixed trigonal ligands was developed: Cu3(HHTP)(THQ) (HHTP=2,3,6,7,10,11-hexahydrotriphenylene, THQ=tetrahydroxy-1,4-quinone). The modulated conductivity (σ≈2.53×10−5 S cm−1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m2 g−1) of the Cu3(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor. 相似文献
A novel glycopeptide-containing block copolymer, poly[O-(tetra-O-acetyl-β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 5 ), was synthesized by mutual termination of living polymerizations of a sugar-substituted α-amino acid N-carboxyanhydride (NCA) ( 1 ) and 2-methyl-2-oxazoline ( 3 ). 5 was deacetylated to provide the glycopeptide-polyoxazoline block copolymer, poly[O-(β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 6 ). 相似文献
The present paper focuses on (i) a new synthetic methodology to prepare vinyl ether-based synthetic glycoconjugates (glycopolymers) with well-controlled structure, and on (ii) the application of glycopolymers bearing modified disaccharide residue as thermotropic liquid crystalline (LC) materials. Two vinyl ethers (VEs) having pendant glucose residues with their hydroxyl functions protected by acetyl and isopropylidene groups, respectively, were found to undergo living cationic polymerization initiated by a HI/ZnI2-initiating system. Deprotection of the resultant monodisperse polymers led to water-soluble polymers bearing a pendant glucose residue. Sequential living block copolymerization of glucose-containing VE and alkyl VE, and subsequent deprotection afforded an amphiphilic block copolymer of well-controlled structure. Transmission electron microscopic observation of its cast thin film revealed microphase-separated surface morphologies that varied with varying segment composition ratio. A VE substituted with a heptadecanoated cellobiose pendant was independently prepared, and was cationically polymerized to give a thermotropic LC polymer. From X-ray analysis, the mesophase was assigned to a discotic columnar in type, in which each main chain, extended due to the steric repulsion between the neighboring bulky pendants, was surrounded by three discotic columns. 相似文献