CAROTENOID TRIPLET STATES IN PHOTOSYNTHETIC BACTERIA

Abstract— The triplet state spectra of anaerobically grown cells of Rhodopseudomonas sphaeroides GIC and R. sphaeroides wild type and aerobically grown cells of R. sphaeroides wild type were examined under reducing and non-reducing conditions at 100 K. by electron paramagnetic resonance (EPR). Large differences in the zero field splitting parameters, |D| and |E| of the triplets are seen to arise in the different preparations. The spectra are assigned to the triplet states of carotenoids, some of which are closely associated with the reaction center and others are contained in the light harvesting complex. Taken together with the triplet state data on Rhodospirillum rubrum wild type previously published the trends in the zero field splitting parameters can be understood in terms of the extent of electron derealization in carotenoids of varying length.     

The preparation of 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides by the condensation/cyclization of trilithiated acetoacetanilides with lithiated methyl salicylates

Several acetoacetanilides were trilithiated in excess lithium diisopropylamide, and the resulting polylithiated intermediates were regioselectively condensed with lithiated methyl salicylates followed by acid cyclization to substituted 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides (benzopyranone-2-acetamides).     

Intramolecular dimers: a new design strategy for fluorescence-quenched probes

Fluorogenic probes dual-labeled with reporter and quencher dyes use a change in fluorescence to monitor biochemical events (e.g., substrate binding or enzyme digestion). Such events change the reporter-quencher distance, which affects fluorescence. Recently, it is has been shown that static quenching through intramolecular dimers is an important mechanism that can sometimes be more efficient than F?rster resonance energy transfer (FRET).     

Anionic-initiated polymerization of β-nitrostyrenes

β-Nitrostyrene and many of its derivatives have been shown to yield high polymers via anionic initiation with alkoxide ions in protic solvents, e.g., alcohols. A study was conducted to determine the effect of certain substituents on the polymerization characteristics of representative monomers of this series and the properties of their polymers. A kinetic study was conducted and the relative rates of propagation were unexpectedly found to correlate well with brown's σ⁺ values. The rates of initiation of two representative monomers, β-nitrostyrene and p-methoxy-β-nitrostyrene, with sodium ethoxide were found to be 3.51 and 2.86 liter/mole sec, respectively. The rate of chain transfer in ethanol was studied qualitatively by using gel-permeation chromatography (GPC) to obtain molecular weight distribution (MWD) curves. The low values of the M _w/M _n ratios indicated little chain transfer in the protic solvent.     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Evaluation of the immobilized artificial membrane phosphatidylcholine: Drug discovery column for high-performance liquid chromatographic screening of drug–membrane interactions

Chromatographic retention factors (k′) of a series of eight β-adrenoceptor antagonist compounds (β-adrenolytic drugs) were determined employing an immobilized artificial membrane column (IAM.PC.DD). The influence of mobile phase pH, ionic strength, and organic modifier composition was studied in order to examine column performance. After the IAM.PC.DD columns were exposed to approximately 7000 column volumes of a 0.01 M PBS mobile phase, five out of six columns tested showed significant peak broadening and decreased k′ values indicative of premature column failure. The data suggested that the immobilized phospholipids stationary phase was removed by the 0.01 M PBS mobile phase. The β-adrenolytic drug's log k′_IAM values obtained with an IAM.PC.DD column were compared to an ^esterIAM.PC.MG column for predicting drug membrane interactions. For the linear regression analysis between log k′_IAM and the logarithm of the n-octanol–water partition coefficients (r_IAM.PC.DD=0.8710 vs. r_IAM.PC.MG=0.9538), the C₁₈ HPLC retention factors (r_IAM.PC.DD=0.8408 vs. r_IAM.PC.MG=0.9380), the liposome partition coefficients (r_IAM.PC.DD=0.8887 vs. r_IAM.PC.MG=0.9187), and various pharmacokinetic parameters, significantly better correlations were obtained with the ^esterIAM.PC.MG column than the IAM.PC.DD column.     

Optimization of matrix-assisted laser desorption/ionization time-of-flight collision-induced dissociation using poly(ethylene glycol)

Details of the optimization of the collision-induced dissociation (CID) process, using a collision cell on a matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometer, are described using poly(ethylene glycol) 1000 (PEG 1000) as a model analyte. The effects of collision gas identity (helium, air, and argon), as well as collision gas pressure, on the resulting MS/MS data were investigated. With PEG 1000, helium was found to give the best results with respect to signal-to-noise (S/N) ratio. The optimum pressure for each gas was found to be in the range where the precursor ion signal was attenuated to approximately 30-50% for helium and 40-60% for argon. The effect of cation choice (Li, Na, and K) on the CID of PEG was also studied. CID spectra were produced for each, but PEG cationized with lithium was found to produce the spectra with the highest S/N ratio. The MALDI-TOF CID spectra that were generated for PEG were compared with the high-energy and low-energy MS/MS spectra obtained from a sector mass spectrometer and from a triple quadrupole mass spectrometer, respectively. The results observed for PEG confirm that CID on a MALDI-TOF mass spectrometer is a high-energy MS/MS technique.     

Effect of pH on the self-exchange reactivity of the plant plastocyanin from parsley

The self-exchange rate constant (25 degrees C) for parsley plastocyanin is 5.0 x 10(4) M-1 s-1 at pH* 7.5 (I = 0.10 M). This value is quite large for a higher plant plastocyanin and can be attributed to a diminished upper acidic patch in this protein. The self-exchange rate constant is almost independent of pH* in the range 7.5-5.6, with a value (25 degrees C) of 5.6 x 10(4) M-1 s-1 at pH* 5.6 (I = 0.10 M). At this pH*, the ligand His87 is protonated in approximately 50% of the reduced protein molecules (pKa* 5.6), and this would be expected to hinder electron transfer between the two oxidation states. However, this effect is counterbalanced by the enhanced association of two parsley plastocyanins at lower pH* due to the partial protonation of the acidic patch.     

Channel flow cell studies on the evaluation of surface pretreatments using phosphoric acid or polymaleic acid for calcite stone protection

The dissolution kinetics of surface-pretreated and weathered calcite was investigated in dilute acid using a channel flow cell with microdisk detection. Two pretreatments were studied, polymaleic acid and phosphoric acid. Treatment with polymaleic acid was shown to significantly passivate calcite but to a lesser extent than the phosphoric acid and the former coating was found to be less effective for protection of calcite from acid attack. However, treatment of calcite with phosphoric acid resulted in the passivation of calcite from acid attack which strongly inhibited dissolution, an effect that was enhanced even further after exposure to the environment.     

Selective cleavage of P-N bonds and the conversion of rhodium N-pyrrolyl phosphine complexes into diphosphoxane-bridged dimers

Rhodium(I) complexes trans-[RhCl(CO)(PR(2)[NC(4)H(3)C(O)Me-2])(2)] (R = Ph, NC(4)H(4)) react with water to give the diphosphoxane-bridged dimers [Rh(2)Cl(2)(CO)(2)(mu-PR(2)OPR(2))(2)] following cleavage of the P-N bonds to the 2-acetyl-N-pyrrolyl groups. The two dimers have been crystallographically characterized and show a number of structural differences, with the PPh(2)OPPh(2) compound possessing semibridging chloride and carbonyl ligands whereas the P(NC(4)H(4))(2)OP(NC(4)H(4))(2) compound contains only terminal chlorides and carbonyls. No evidence for cleavage of the P-N bonds involving the unfunctionalized N-pyrrolyl groups in trans-[RhCl(CO)(P[NC(4)H(4)](2)[NC(4)H(3)C(O)Me-2])(2)] was observed.