Simple thiazocine-2-acetic acid derivatives via ring-closing metathesis

A new protocol for synthesis of 2-heterocylylacetic acid derivatives involving conjugate addition of allyl mercaptan to an acrylate containing a tethered olefinic site followed by RCM (ring-closing metathesis) is described. In this series, sulfanyl derivatives were unreactive, while sulfoxide and sulfone analogues provided the corresponding thiazocines in fair to excellent yields. Use of the sulfoxide oxidation state as a protecting group for sulfides inert to RCM is demonstrated also. Thus, oxidation of sulfide 9 [N-allyl-N-[2-(allylthio)-4-(1H-indol-1-yl)-4-oxobutyl]-4-methylbenzenesulfonamide] followed by cyclization yielded the corresponding thiazocine sulfoxide 12. Deprotection (deoxygenation) of 12 was accomplished using Lawesson's reagent, producing 1-[[4-[4-(methylphenyl)sulfonyl]-3,4,5,8-tetrahydro-2H-1,4-thiazocin-2-yl]acetyl]-1H-indole (21) in 67% unoptimized yield.     

Novel annulene dications from methylated [2.2]metacyclophane monoenes and [e]-ring benzannelated dimethyldihydropyrene

Tetramethyl- and hexamethyl-substituted [2.2]metacyclophane monoenes (10 and 11) are transformed into their corresponding trans-dimethyldihydroethanophenanthrenium dications (14(2+) and 15(2+)) in FSO(3)H x SbF(5) (4:1) and FSO(3)H x SbF(5) (1:1) with SO(2)ClF or SO(2) as the solvent; these 10 pi-dications are equivalent to the C-4/C-5 diprotonated dications of the 2,7-dimethyl derivative of trans-DMDHP, 3a. The trans-12c,12d-dimethyl-12c,12d-dihydrobenzo[e]pyrene (6) reacts with FSO(3)H/SO(2)ClF under surprisingly mild conditions to give initially a persistent diprotonated dication (6H(2)(2+)) and, subsequently, the oxidation dication (6(2+)); the 6(2+):6H(2)(2+) ratio reaches 4:1 after 1 week at low temperature. Protonation of the anti-metacyclophane (13) was also examined. Charge delocalization mode and tropicity in the resulting dications are gauged via detailed NMR studies at 500 MHz.     

A transannular reaction during the base catalysed rearrangement of bicyclo(4.3.0)-2β-hydroxy-2α-vinyl-1β-Methyl-8-oxo-Δ6,7-nonene

Synthesis and rearrangement of bicyclo(4.3.0) - 2β - hydroxy - 2α - vinyl - 1β - methyl - 8 - oxo - Δ⁶ - nonene was observed to yield a transannular reaction product tricycio - (6.3.0.0^1,8) - 2 - methyl - 8α - hydroxy - 4 - oxo - Δ² - undecene 16. Spectral evidence supports the assigned structure.     

Raney nickel reductions—VIII A synthesis of 1:2-benzanthracene and its 3′-methyl and 4-methyl derivatives

1:2-Benzanthracene and the 3′-methyl derivative have been prepared by Raney nickel reduction of the sulphuric esters of the leuco derivatives of 1:2-benzanthraquinone and 4′-chloro-3′-methyl-1:2-benzanthraquinone, followed by dehydrogenation. 3-Hydroxy-1:2-benzanthraquinone was methylated in the 4-position by formaldehyde, sodium hydrosulphite and sodium hydroxide solution (the Marschalk reaction). Simultaneous reduction of the nuclear hydroxyl and quinone groups was effected by Raney nickel reduction of the trisulphuric ester of 3:9:10-trihydroxy-4-methyl-1:2-benzanthracene, and the resultant hexahydro-4-methyl-1:2-benzanthracene was dehydrogenated to 4-methyl-1:2-benzanthracene. The preparation of 3:4:9:10-dibenzopyrene from Mayvat brilliant red AF by Raney nickel reduction of the sulphuric ester of the leuco derivative and subsequent dehydrogenation is described.     

A convenient preparation of 3,3,3-trifluoro-1-propynylamines and their Lewis acid catalyzed reaction with carbonyl compounds leading to (z)-alpha-(trifluoromethyl)-alpha,beta-unsaturated amides

N,N-Dialkyl(3,3,3-trifluoro-1-propynyl)amines were readily prepared by a three-step procedure starting from commercially available 2,2,3,3,3-pentafluoropropanol. These fluorinated alkynylamines reacted smoothly with a variety of aldehydes or ketones in the presence of a catalytic amount of Lewis acid and molecular sieves 4A at ambient temperature to produce the corresponding alpha-(trifluoromethyl)-alpha,beta-unsaturated amides in good to excellent yields with high Z-stereoselectivity.     

Thick-target PIGE analysis of plant materials preconcentrated by dry ashing

An analytical methodology has been developed for the UV-spectrophotometric determination of carbaryl in waters after its preconcentration onto a polyether type polyurethane foam followed by on-line elution. The aforementioned strategy offers an easy way for in-field sampling and to improve the analytical sensitivity. Several chemical and flow variables (mass of sorbent, sample flow rate, sample volume and carrier flow rate) were studied to ensure the best performance of the system. Recovery studies, carried out on natural water samples spiked with known amounts of carbaryl at concentration levels between 250 and 500 mug l(-1), provided recovery percentages between 94 and 105%. A detection limit of 12 mug l(-1) was achieved and a variation coefficient of 3.4% was obtained at 0.50 mug ml(-1).     

Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices

The double-T injector design employed in many microchip capillary electrophoresis devices allows for the formation of very small (50-500 pL) sample plugs for subsequent analysis on-chip. In this study, we show that sample plugs formed at the channel junction can be geometrically defined. The channel width and injector symmetry prove to be of great importance to good performance. A unique pushback of solvent into the side channels can be induced when the side channels have a very low resistance to flow, and this helps to better define the injected sample plug. Samples and running buffers of differing ionic strength (e.g., 10 mM KCl buffer and 20 mM KCl sample) can yield widely variable results in terms of plug shape and amount injected (variations of 1.5 to 10x). Applying bias voltages to all the intersecting channels aids in controlling the plug shape. However, when the ionic strengths of buffer and sample are not matched, the actual amount injected (up to 10x variations) can be inconsistent with the appearance of the plug formed in the injector (up to only 30 % variations). Operating at constant pH and ionic strength produced the most consistent results. This report examines the effects of altering the injector geometry and solution ionic strengths, and presents the results of using bias voltages to control plug formation. The observed results should provide a benchmark for modeling of the fluid dynamics in channel intersections.     

The compensation effect: A fact or a fiction

In this article, the facts and fictions surrounding the compensation effect is explored. False compensation effect occurs mainly due to: propagation of computational and experimental errors resulting in inaccurate estimates of the Arrhenius parameters; and, the natural compensation between InA andE. Since Arrhenius parameters are sensitive to errors in temperature; the errors due to uncertainty in temperature should be minimized to eliminate false compensation effect. Increasing the experimental temperature range is helpful in minimizing errors due to uncertainty in temperature. A point of concurrence in a plot of Ink and 1/T establishes the occurrence of true compensation effect. True compensation effect has been shown to be a useful tool in chemical research for: identifying the governing reaction mechanism; predicting the effects of various reaction parameters; and, correlating and reducing experimental data.

---

Zusammenfassung In dieser Mitteilung werden Fakten und Vorstellungen betreffs des Kompensationseffektes untersucht. Falsche Kompensationseffekte werden hauptsächlich verursacht durch: eine ungenaue Ermittlung der Arrheniusparameter durch die Fortpflanzung von rechnerischen und experimentellen Fehlern sowie dem natürlichen Kompensationseffektes zwischen InA undE. Das Arrheniusparameter gegenüber Fehler im Temperaturwert sehr empfindlich sind, sollten Temperaturungenäuigkeitsfehler zur Vermeidung eines falschen Kompensationseffektes minimalisiert werden. Zur Verminderung der aus der Temperaturungenauigkeit resultierenden Fehler ist es von Nutzen, den Temperaturbereich des Experimentes zu erweitern. Ein wahrer Kompensationseffekt wird durch einen Schnittpunkt in einem Ink-1/T Diagramm angezeigt. Es wird gezeigt, daß der wahre Kompensationseffekt ein nutzvolles Mittel in der chemischen Forschung darstellt: zur Feststellung des dominierenden Reaktionsmechanismus, zur Vorhersage der einflüsse verschiedener Reaktionsparameter und zur Aufarbeitung und Schlußfolgerung von bzw. aus experimentellen Daten.

---

, . , , lnA E. , , . . Ink-1/T . , , , .

---

---

The author would like to thank the reviewer for his constructive criticisms.     

Application of pressurized sample preparation methods for the analysis of steels and copper alloys

Pressurized sample preparation devices (High Pressure Asher, Pressurized Microwave Digestion system, compared with a PTFE decomposition vessel) were used to dissolve certified metal alloy samples (steel, copper) for ICP analysis. Based on the results of the analysis it was established that both up-to-date devices can be advantageously applied to quickly and quantitatively dissolve metal alloy samples. To dissolve the samples, two different kinds of acid mixtures (A: nitric and hydrochloric acid; B: nitric and hydrochloric and sulphuric and phosphoric acid) were used. The sample preparation is simpler and less time-consuming than the earlier commonly used methods, sample loss and degree of contamination are also reduced. Steel samples containing tungsten, titanium and niobium (less than 0.5%) can only be analyzed using a mixture of the four acids. By dissolving steel samples in the nitric and hydrochloric acid mixture, the concentration of their most common elements (Cr, Ni, Mn, V, Cu) as well as their S and P content can be determined. Copper alloy samples can be dissolved quickly by the pressurized microwave decomposition device using hydrochloric acid and diluted (1:1) nitric acid.     

Optimization of Conditions for the HPLC Determination of Synthetic Dyes in Food

The retention of synthetic food dyes on the sorbent Kromasil C18 was studied under the conditions of reversed-phase and ion-pair high-performance liquid chromatography, depending on the concentrations of the ion-pair reagent (tetrabutylammonium dihydrophosphate) and organic solvent (acetonitrile) in the mobile phase and on the concentration and pH of the phosphate buffer solution. The optimum conditions were selected for the separation of ten dyes in the isocratic elution mode within 25 min. A procedure was developed for the determination of synthetic food dyes in foodstuffs; the detection limit was 10–30 g/L.