Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

Polymer-supported nitroxyl radical catalyst for selective aerobic oxidation of primary alcohols to aldehydes

PS-TEMPO, a polymer-supported 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), was successfully applied as a recyclable, active and selective catalyst for the oxidation of primary aliphatic and benzylic alcohols to aldehydes by molecular oxygen in the presence of Co(NO3)2 and Mn(NO3)2 as co-catalysts.     

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Autocorrelated 13c-13c double quantum coherence two-dimensional nmr spectroscopy: Utilization of a modified version of the technique as an adjunct in the total assignment of the 1h- and 13c-nmr spectra of the mutagen phenanthro[3,4-b]thiophene

Development of successively higher field nmr spectrometers has facilitated the study of increasingly more complex molecules, although smaller molecules such as phenanthro[3,4-b]thiophene still offer very substantial assignment problems because of the highly congested nature of their ¹H- and ¹³C-nmr spectra. Assignments of such spectra, if they are to be unequivocal, frequently require the utilization of two-dimensional nmr spectroscopic techniques. Total assignments of the ¹H- and ¹³C-nmr spectra of phenanthro[3,4-b]thiophene are reported. Assignments were based on a conventional high resolution 500 MHz ¹H-nmr spectrum, autocorrelated two-dimensional ¹H-nmr spectra (COSY), two-dimensional ¹H-¹³C chemical shift correlation spectra and a modified version of autocorrelated ¹³C-¹³C double quantum coherence two-dimensional nmr spectroscopy. From NOE measurements, a separation of 1.99 Å between H1 and H11 was computed, suggesting that phenanthro[3,4-b]thiophene has a pronounced helical conformation in solution.     

Synthesis,Structure and Reactivity of PH‐Phosphoraneiminato‐ and Iminophosphoraneiminato Group 4 Transition‐Metal Complexes

The versatile coordination chemistry of the well‐investigated phosphoraneiminato‐ligand R₃PN^— ( I ) was extended by the successive introduction of protons to the phosphorus atom. The position of the resulting equilibrium between the NH‐phosphanylamido‐ [R₂P‐NH^—] and the PH‐phosphoraneiminato‐form [R₂HP=N^—] is affected by the Lewis acidity of the coordinated metal fragment. Experimental studies on complexes with various substitution patterns at the group 4 metal center R₂HP=N[M] ( II ) were unambiguously confirmed by DFT‐calculations. The isolation of group 4 PH‐dihydrido‐phosphoraneiminato‐complexes RH₂P‐N[M] ( III ) is prevented by the low thermodynamic stability of the target molecules, also supported by the results of ab initio calculations. However, an access to the by then unknown transition‐metal substituted iminophosphanes RP=N[M] ( IV ) was verified for the first time. Within extensive studies on the coordination chemistry of bis(imino)phosphoranes RP(=NR′)(=NR″), several species of group 4 complexes R(R′N=)P=N[M] ( V ) were isolated and structurally characterized. In this case, investigations on the NH/PH‐tautomerism were performed exclusively on theoretical level, because the required educts are experimentally non‐accessible due to their kinetic instability.     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

Plasma total homocysteine measurement by ion-paired reversed-phase HPLC with electrochemical detection

Homocysteine is thought to be a risk factor for vascular disease and this has led to an increase in demand for its assay in clinical laboratories. An HPLC method, incorporating electrochemical detection, for measurement of plasma total homocysteine is presented. The method is simple to perform, precise and suitable for clinical applications.