Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Synthesis of new mono-functionalised tetrathiafulvalene derivatives by reactions of etrathiafulvalenyllithium with aldehydes and ketones: X-ray crystal structures of TTF-CMe(OH)Fc, TTF-CMe(OMe)Fc and TTF-CH(OMe)TTF (Fc = ferrocenyl)

Reactions of tetrathiafulvalenyllithium (TTF-Li) with a range of aldehydes and ketones have been explored for the first time, to provide an efficient route to mono-functionalised TTF derivatives of general formulae TTF-CH(OH)R (R = alkyl, phenyl, tetrathiafulvalenyl and ferrocenyl) and TTF-CR(OH)R′ (R = alkyl, phenyl, R′ = alkyl, phenyl, tetrathiafulvalenyl, ferrocenyl, and R-R′ = fluorenyl). Subsequent transformations involving the reactive alcohol group of some of these compounds are reported. The structures of the three title compounds have been established by single-crystal X-ray analysis.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 11. Synthesis and total assignment of the 1H and 13C NMR spectra of isomeric benzothienonaphthoquinolines using multiple inverse detected two-dimensional NMR methods

Two novel heterocyclic ring systems, namely, [1]benzothieno[2,3-c]naphtho[1,2-f]quinoline and [1]benzothieno[2,3-c]naphtho[2,1-g]quinoline have been synthesized and characterized by inverse detected two-dimensional nmr methods. Unequivocal total assignments of the proton and carbon nmr spectra were made through the concerted utilization of HMQC (Heteronuclear Multiple Quantum Correlation) and a combination of HMBC (Heteronuclear Multiple Bond Correlation) and HMQC-TOCSY (HMQC with proton TOtal Correlation Spectroscopy).     

The preparation of hot-pressed chalcogenide spinels. II. Stoichiometry and optical transparency in CdCr2S4 and CoCr2S4

The compounds CdCr₂S₄ and CoCr₂S₄ have been hot pressed into disks that are highly transparent in the infrared. Stoichiometry has been altered by varying the $\text{Cr}{}^{\mathrm{3+}}\text{M}{}^{\mathrm{2+}}$ ratio, where M²⁺ is Cd²⁺ or Co²⁺. The effects of nonstoichiometry on optical transmission were determined. Excess M²⁺ attenuates the transmission much more than excess Cr³⁺.     

Nouveaux exemples d'acétonides d'aldéhydosucres furanniques

Further examples of O-isopropylidenaldehydosugars in the furanose series Formyl-bearing furanose derivatives 1–3 (α-D -xylo or α-D -erythro configurations) and 5–8 (configurations α-D -ribo, α-D -lyxo, β-L -threo and D -arabino) have been prepared by classical synthetic steps and their properties mainly spectroscopic, reported. The coupling constant between the formyl and the vicinal proton is always small. Like other members of the series, these new aldehydosugars constitute very useful and flexible synthetic intermediates.     

Potassium addition to Fe/MgO, Ni/MgO and Ni/SiO2: Reducibility, dispersity and stabilization of the promoter by the support

The influence of potassium addition on the morphological properties of Fe/MgO and Ni/MgO has been investigated: KNO₃ addition to precursors results in a decrease of the reducibility and in a smaller dispersity of the metallic phase. A loss of potassium is observed at reduction temperatures in excess of 773 K. Silica-supported Ni behaves differently: silica inhibits the potassium volatilization and nickel reducibility is enhanced. This illustrates how promoter effects can be influenced by the nature of support.

---

Fe/MgO Ni/MgO: KNO₃ . , 773 K. , : . .

     

Na5AlF2(PO4)2: Darstellung,Kristallstruktur und Ionenleitfähigkeit

Na₅AlF₂(PO₄)₂: Synthesis, Crystal Structure and Ionic Conductivity Two different procedures (precipitation from aqueous solution and solid state reaction) for the synthesis of hitherto unknown Na₅AlF₂(PO₄)₂ were optimized. The crystal structure was determined using diffractometer data (P3 , a = b = 10.483(1), c = 6.607(1) Å, MoKα, 1080 independent reflections, R_w = 0.025). PO₄-tetrahedra and AlO₄F₂-“octahedra” are connected via common vertices forming a twodimensionally extended heteropolyanion. Sodium is located in interconnected spacings of the [AlF₂(PO₄)₂]-part of the structure. Ionic conductivity as expected because of these structural features was affirmed experimentally.     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.